Spec Sheet

CSD2X2 Drop-In Ceiling Speaker

Bogen's CSD2X2 Drop-In Ceiling Speaker is a full-range

speaker that allows for fast and easy installation, which

saves installation time, effort, and cost.

The CSD2X2 is a 2' x 2' speaker that fits perfectly into place

in 2'x 2' ceiling frames - without needing to cut ceiling

tiles or requiring the use of tile support rails. The CSD2X2

can also be easily installed in 2' x 4' ceiling tiles - just make

one cut to the ceiling tile, position the support rail,

and drop the speaker into place.

•

Finely perforated grille over the entire front of speaker

•

Fully enclosed, industrial grade steel construction

•

70V/25V, 4-watt transformer (4, 2, 1, .5, .25 watt) taps;

selected by rotary switch

•

8" main cone with secondary high frequency cone

•

For use with both 2 ft. x 2 ft. and 2 ft. x 4 ft. suspended

tile ceilings

•

Support rail crossbar (included)

CEILING GRID

SUPPORT RAIL

CROSSBAR INCLUDED

(2 ft. X 4 ft. CEILING FRAME ONLY)

CEILING TILE

(CUT IN HALF, OR NO MORE

THAN 23-

⁄4")

CSD2X2

2 ft. X 2 ft.

TILE SPACE

2 ft. X 4 ft.

TILE SPACE

PAGE 1
CSD2X2 Drop-In Ceiling Speaker Bogen's CSD2X2 Drop-In Ceiling Speaker is a full-range speaker that allows for fast and easy installation, which saves installation time, effort, and cost. The CSD2X2 is a 2' x 2' speaker that fits perfectly into place in 2' x 2' ceiling frames - without needing to cut ceiling tiles or requiring the use of tile support rails.
PAGE 2
CSD2X2 Drop-In Ceiling Speaker SUPPORT RAIL CROSSBAR INCLUDED (FOR USE WITHIN 2' X 4' TILE SPACE ONLY) SEISMIC TETHER POINT Lead 70V 25V COM Color Red Yellow Black COVER WIRE NUTS COVER SEISMIC TETHER POINT WIRE NUTS S P E C I F I C AT I O N S Frequency Response . . . . . . . . . . 95 Hz - 20 kHz SPL @ 1W / 1M . . . . . . . . . . . . . . . 94 dB Power Taps . . . . . . . . . . . . . . . . . . 4, 2, 1, .5, .25 Dispersion @ 2 kHz (6 dB down) . . . . . . . . . . . . . . . . . .