User Manual

Specifications subject to change without notice.
© 2003 Bogen Communications, Inc.
Part No. 54-2094-02B 0908
50 Spring Street, Ramsey, NJ 07446, U.S.A.
Tel. [phone] • Fax: [phone]
www.bogen.com
Cable Kit, 10-Foot
Model CK10W
Pendant
Drop Cable
Safety Cable for Pendant
(Primary Suspension Cables not shown)
Seismic Tether
for
Ceiling Speaker
Description
The CK10W is a 10-foot long Cable Kit. The kit can be used either as a main
suspension drop cable or as a safety cable.
Contents
10-foot long Cable w/ fixed loop, Cable clamp, Eyebolt, Spacer Nut, Instruction Sheet
Installation
The cable can be secured to the speaker and the building structure in a variety of
ways. Below are three common approaches. The support structure MUST be able
to support 100 lbs. to provide adequate safety margin.
WARNING
CABLE CLAMPS MUST BE SECURELY TIGHTENED. FAILURE TO DO SO MAY
RESULT IN PROPERTY DAMAGE, INJURY OR DEATH, AND LEGAL LIABILITY
TO YOU AND YOUR BUSINESS.
Thread Spacer Nut completely on
to Eyebolt, then thread the Eyebolt
into Safety Point. Tighten securely
(but do not over-tighten).
SEE NOTE
SEE NOTE
EYEBOLT
SUPPORT
STRUCTURE
SPACER NUT
SEE NOTE
CK10W Safety Cable
Kit Manual
50 Spring Street, Ramsey, NJ 07446, USA
54-2094-02
B
7/29/09
CK10W
PART NO.
REVISION
DATE
FIRST USED
TITLE
NOTES:
1) MANUAL TO BE WHITE WITH BLACK INK PRINTING.
2) MANUAL SIZE TO BE 5.5" W x 8.5" H., DOUBLE SIDED.
3) “COUNTRY OF ORIGIN” MUST BE ADDED BY SUPPLIER.
SEE NOTE ABOVE.
3) SUBMIT SAMPLE PROOF BEFORE PRINTING.
Note
IMPORTANT: For Vinyl-coated Cable, you must strip
away the coating in the area where the Cable Clamp
will be applied so that the clamp makes contact to the
wire core of the cable.
VINYL
COATING
EXPOSED
WIRE CORE
CLAMP