User Instructions

The Instruction of Remoter BF-305
1. Select the Channel for Programming:
Press “CHANNEL+” or “CHANNEL-” to choose
the channel until the LED bright on the channel
you want.
2. Programming this channel on the Motor or Receiver:
to have the motor or receiver under the programming state ( operating according to the instructions of the
motor or receiver, i.e. keep pressing SETTING key on the motor head or receiver until they respond KA
KA or Di--Di--)
3. Then press the CONFIRM key on the remote
( do it in 3 seconds after the motor under the programming state), the motor jogs KA KA or the receiver
sounds Di Di Di Di to confirm the programming succeed.
FIY:
The group channel will be recorded on the motor automatically when the single channel has been
programmed on the motor.
The Instruction of Remoter BF-305
1. Select the Channel for Programming:
Press “CHANNEL+” or “CHANNEL-” to choose
the channel until the LED bright on the channel
you want.
2. Programming this channel on the Motor or Receiver:
to have the motor or receiver under the programming state ( operating according to the instructions of the
motor or receiver, i.e. keep pressing SETTING key on the motor head or receiver until they respond KA
KA or Di--Di--)
3. Then press the CONFIRM key on the remote
( do it in 3 seconds after the motor under the programming state), the motor jogs KA KA or the receiver
sounds Di Di Di Di to confirm the programming succeed.
FIY:
The group channel will be recorded on the motor automatically when the single channel has been
programmed on the motor.