OWNER’S MANUAL bObi Classic™
Congratulations! Congratulations on your new intelligent floor cleaner! bObi is now at your service. To see bObi at her best, please read the Quick Start Guide and this manual thoroughly. Welcome to the bObsweep family and happy cleaning! If you have any questions or concerns, feel free to contact our helpful team at support@bobsweep.com or 1-888-549-8847 for support in the US & Canada. Our business hours are Monday – Friday 9 am – 5 pm, PST.
6 Important Safety Instructions 14 Get bObi Ready to Clean Install the Battery 16 First Charge 17 First Clean 19 Buttons 20 8 Box Contents 22 Charging Station Placement 24 Auto Charging 25 Manual Charging 27 10 Anatomy 28 Remote Control Buttons 30 Syncing Remote 32 Navigational Buttons 33
34 46 Cleaning Schedule Parts & Maintenance Current Time & Day 38 Cleaning Schedule 40 Auto-Resume 43 Mini Mop 48 Dustbin 50 Main Brushes 54 Side Brush 58 UV Lamp 59 Front Wheel 60 Sensors 61 Blindfold Stickers 62 Storing 63 84 Warranty Information 87 FAQs 64 Troubleshooting Error Codes 67 Home Checkup Test 72 Cleaning Behavior 83 92 End User License Agreement
Important Safety Instructions Basic safety precautions should always be followed, including the following: • To protect against electrical shock, do not immerse any part of bObi — with the exception of her mopping cloth — into water or other liquids. bObi’s dustbin may be washed with water only once her motor has been removed. • Turn bObi OFF and unplug her from outlet when she is not in use and before conducting maintenance.
• bObi is composed of electronic components that in rare and unintended cases can cause hazards of heating, fire, and other malfunctions. Furthermore, because bObi is capable of and intended for autonomous movement and cleaning, her use poses the risk of collision with property, pets, and persons and unintended removal of articles, such as small valuables, jewelry, or hair of persons or pets lying on the floor, among others. • Do not look directly into the UV light.
Box Contents 1 bObi Classic 2 Charging Station 3 Spare Main Brush 4 Charging Adapter 5 Remote Control 6 Screwdriver 7 Spare Side Brush 8 Cleaning Tool 9 Pack of Screws 10 Blindfold Stickers 11 Mini-Mop Attachment 12 2 Microfiber Mopping Cloths 13 Spare Filter 14 Owner’s Manual, Quick Start Guide, Warranty Card 15 Syncing Tool 16 2 Spare Main Brush Holders 8
3 2 1 7 6 4 8 5 9 11 12 10 13 15 14 16
Anatomy Top View 1 Cover 2 Touchscreen Buttons 3 Transmitter 4 Charging Indicator 5 Touch Sensors 3 6 Wall Sensors 5 6 7 Charging Inlet 8 Power Switch 4 2 1 7 8 10
Bottom View 1 Main Brush 2 Rubber Brush 3 Dustbin 4 Right Wheel 5 Left Wheel 7 6 Side Brush 8 7 7 Edge Sensors 8 Front Wheel 9 UV Light 9 6 10 Battery 10 4 L R 5 2 1 11 3
1 Charging Station 2 Remote Control 1 2 12
Touchscreen Buttons 1 GO! bObi will clean on her default cleaning mode 2 JUICE bObi will search for her charging station to refuel 3 WAFFLE bObi will clean a localized mess 1 2 3 13
Get bObi Ready to Clean
Install bObi’s Battery Before bObi’s first clean, you must install her battery. Make sure bObi’s power switch is turned OFF. 1 Remove the battery cover using a Phillips head screwdriver. 2 Plug the battery in at the circuit junction. Tuck the wire into the side of the compartment and slide the battery in. 3 Replace the cover and retighten the screws. After installing bObi’s battery, charge bObi for 8 hours before first use.
Charge bObi 1 2 Plug the charging adapter into the side of the charging station. The station’s blue power light will turn on. Place bObi on her charging station with the metal nodes on her front resting against the plates on her station. bObi will chirp, her lights will flash, and the center light will blink to indicate that she is charging. The other lights will disappear. The center light on bObi will remain solid when she’s fully charged and ready to clean.
Alternatively, you may charge bObi by plugging the charging adapter into the inlet above her power switch.
bObi’s First Clean bObi is now ready to clean! Flip her power switch ON, and press the GO! button on her cover or remote. bObi will clean on her default setting. If bObi is left idle with her power switch ON, her screen will go blank and she will enter standby mode. To wake bObi, tap her touchscreen. To fully power off bObi, flip her power switch OFF. Clear the area of small items and cords before asking bObi to clean.
Touchscreen Buttons There are three touchscreen buttons on bObi: GO!, JUICE, and WAFFLE. These buttons do not work while bObi is on her charging station. To use these buttons, you must first remove bObi from her charging station. Alternatively, you can use bObi’s remote to select her cleaning modes without needing to remove her from her charging station.
GO! GO! is bObi’s default cleaning mode. bObi will clean a large area until her battery reaches 15% capacity, and then she will return to her charging station. JUICE JUICE tells bObi to return to her charging station. bObi will not vacuum while in JUICE mode. WAFFLE WAFFLE can be used to clean up small spills of dry substances. bObi will clean an area of 10 square feet (1 square meter) for about 1 – 3 minutes before she stops and enters standby mode.
Charging Station
Charging Station Placement • Position bObi’s charging station against a wall on a hard, flat surface. • Make sure that there is at least 10 feet (3 m) of open space in front of the charging station and 2 feet (0.5 m) on either side of the station. 2 ft (0.5 m) 2 ft (0.5 m) 10 ft (3 m) Secure bObi’s charging adapter behind her station so the cord does not get in her way while she is cleaning.
Auto Charging bObi automatically searches for her charging station when her battery reaches 15% capacity. She will chirp, stop vacuuming, and display JUICE on her cover while searching. When bObi detects her charging station, she will line herself up, dock, and begin to charge. If bObi has trouble finding her station, you likely need to sync the station. To sync the charging station: 1 Flip bObi’s power switch OFF. 2 Plug the adapter into the charging station.
4 While still pressing the sync button, flip bObi’s power switch ON. Direct bObi to her charging station at any time by pressing the JUICE button on her cover or remote. To prolong bObi’s battery life, flip her power switch OFF when not in use. 5 bObi will chirp twice to let you know the sync was successful.
Manual Charging Using the charging station: • Place bObi on her charging station with the metal nodes on her front resting against the plates on her station. Using the adapter: • Plug the charging adapter directly into the inlet above bObi’s power switch.
Remote Control
Remote Control The remote control is your most useful tool when communicating with bObi. It allows you to set bObi’s cleaning schedule and activate her cleaning modes. Each time you select an action on the remote, bObi will chirp once before performing the selected action.
CUR TIME (Current Time) • Sets the current time and weekday SCH TIME (Scheduled Time) • Sets bObi’s cleaning schedule All/None • Selects and deselects all weekdays UV • Turns bObi’s UV light ON and OFF HI/BYE • Puts bObi in and out of standby mode OK • Confirms selection Navigational Arrows • Guide bObi forward, backward, left, and right STOP • Pauses or resumes bObi’s movement SPEED • Alternates between bObi’s two speeds JUICE • Sends bObi to her charging station WAFFLE • bObi will clean a localized me
Syncing bObi with her Remote bObi’s remote control requires two AAA batteries (not included). Do not leave the batteries in the remote if you are not using it on a regular basis. Keep the remote at room temperature. If bObi is not responding to her remote, it likely needs to be synced. To sync bObi’s remote: 1 2 Flip bObi’s power switch OFF. While holding down the OK button on bObi’s remote, flip bObi’s power switch ON. 3 bObi will chirp twice to let you know the sync was successful.
Using the navigational arrows: Hold down the remote’s navigational buttons to keep bObi moving in the desired direction. Release the button when you are done manually driving bObi. bObi’s edge sensors are located along her front, not along her back. Do not reverse bObi towards edges, as she will fall.
Cleaning Schedule
Set bObi’s Cleaning Schedule bObi can be programmed to start cleaning on the days and time of your choosing through her remote control. To set up bObi’s cleaning schedule, you must first set the current time and weekday on her remote.
Weekdays • Numbers 1 through 7 at the top of the screen represent days of the week: 1 = Monday 2 = Tuesday 3 = Wednesday 4 = Thursday 5 = Friday 6 = Saturday 7 = Sunday Signal Indicator • Lights up when bObi and her remote communicate UV Indicator • Indicates if the UV light is on or off Speed Indicator • Indicates bObi’s current cleaning speed Current Time Indicator • Displays the current time Scheduled Time Indicator • Displays bObi’s scheduled cleaning time bObi uses a 24-hour clock.
Setting the Current Time To set the current time on bObi’s remote: 1 Make sure bObi’s power switch is ON. Press the CUR TIME button on bObi’s remote. 2 The first hour digit will start flashing. Use the FWD and BACK buttons to adjust the first hour digit. bObi will start cleaning on the scheduled time even if her dustbin or brushes need cleaning. Remember to regularly check bObi’s dustbin and brushes to make sure they are clean. 3 Press the RGHT button to move on to the next digits.
4 Press the RGHT button until the frame around number 1 at the top of the screen starts to flash. 5 Press the FWD and BACK buttons to scroll through the weekdays. 6 When you reach the current weekday, press CUR TIME again to save your settings.
Setting a Cleaning Schedule To set the cleaning time and days: 1 Make sure bObi’s power switch is ON. Press the SCH TIME button on bObi’s remote. 40 2 The first hour digit under SCHEDULE TIME will start flashing. Use the FWD and BACK buttons to adjust the first hour digit. 3 Press the RGHT button to move on to the next digits. Use the FWD and BACK buttons to adjust the hour and minute digits.
4 5 Press the RGHT button until the frame around the first day of the week, number 1, begins to flash. Press the FWD and BACK buttons to scroll through the weekdays. If you’d like bObi to clean every day, press the ALL/ NONE button. Press the ALL/NONE button again to deselect all days. 6 Press OK to select a day while the frame around that day is flashing. Days that are selected are underlined. Press OK again to deselect a day.
7 Use FWD and BACK to scroll through weekdays and press OK to select or deselect cleaning for each day. 42 8 Press SCH TIME to save your settings. 9 bObi will chirp to confirm she has saved her new schedule.
Auto-Resume On auto-resume mode, bObi leaves her charging station EVERY TIME her battery is full to perform “back-to-back” cleaning cycles. To enable auto-resume: 1 Make sure bObi and her remote are synced and bObi’s power switch is ON. 2 Press the SCH TIME on bObi’s remote. The first hour digit under SCHEDULE TIME will start flashing.
3 Press the STOP button and “FFG0” — finish fueling and go — will appear on the remote’s screen. 44 4 Press the SCH TIME button again to save your settings.
To disable auto-resume: 1 Press the SCH TIME button on the remote. 2 Press the STOP button and “FFG0” will reset to the last saved time. 3 Press the SCH TIME button again to save your settings.
Parts & Maintenance
Mini-Mop bObi comes with a mini-mop attachment and 2 microfiber mopping cloths, which can be used dry or damp. bObi’s mini-mop can be used to remove small stains from hard floors such as tile, laminates, and hardwood. To use bObi’s mini-mop: 1 Align the two prongs of the mini-mop attachment with their notches on the underside of bObi’s dustbin. 48 2 Hold the attachment perpendicular to bObi and press down gently until the attachment snaps into place.
To detach bObi’s mop: 1 2 Grip the button on the back of the mop attachment and pull up to unlock. Lift the attachment until it is perpendicular to bObi, then pull up to detach. Remove the mini-mop attachment when bObi cleans rugs and carpets. 3 Remove the mopping cloth from the mini-mop attachment and wash as needed.
Dustbin To use bObi’s mini-mop: 1 Hold down the eject button on the back of the dustbin 2 Pull the dustbin out. 3 Pull up the two color clips on either side of the dustbin with both hands. This will release the gate. Use the cleaning tool to remove remaining dirt and dust from the dustbin. 50 Do not remove the dustbin while bObi is upside down.
Filter The filter captures fine particles and allergens, and prevents them from escaping back into the air. To clean the filter: 1 Eject the dustbin and release the gate. 2 3 Flip the dustbin upsidedown and open the clear filter cover. Remove the filter and dust it off using bObi’s cleaning tool. It is recommended that you change bObi’s filter every 6 months if you are using her regularly.
Washing the Dustbin One of bObi’s best features is her washable dustbin. To wash the dustbin, first remove the vacuum motor and filter. To remove the vacuum motor: 1 Eject the dustbin, and remove the filter. 2 Push the button on top of the dustbin. With the motor and filter removed, the dustbin may be washed with water. 52 Do not wash or wet the vacuum motor.
To reinstall the dustbin: 1 Replace the filter and vacuum motor. 2 Slide the dustbin into bObi until it locks properly.
Main Brushes bObi has one bristled brush and one rubber brush. It is recommended that you remove and clean bObi’s main brushes every few cleaning cycles. To remove and clean the main brushes: 1 Flip bObi over and press the latch on the side of the main brushes. 54 2 Lift the locking bar up and remove the main brushes.
3 Use the cleaning tool to remove debris from the ends of the brush as well as the brush compartment. 4 You may use a pair of scissors to cut away any hair or threads wrapped around the brush, or a pair of tweezers to remove congestion from the notches where the main brush is held.
5 Remove and clean the rubber brush ends. Make sure the metal cores remain in place before replacing the brush ends. 56 6 Starting with the rubber brush, replace the brushes. Insert the socket ends first, and lower the rubber ends into place under the latch bar.
7 Lower the locking bar until it clicks and locks into place.
Side Brush bObi uses a side brush to clean along corners and walls. Dirt and dust trapped around the brush can hinder its ability to move freely and reduce bObi’s efficiency. To clean the side brush: 1 Remove the side brush using a Phillips head screwdriver. 58 2 Use the cleaning tool to brush off hair tangled around the side brush, as well as the socket where the side brush is held. 3 Replace the side brush and retighten the screw.
UV Light bObi’s UV light is activated by default. The UV light is only visible while she is cleaning. To toggle the UV light ON and OFF: • While bObi is cleaning, press the UV button on the remote. Do not look directly into the UV light.
Front Wheel To remove and clean the front wheel: 1 Using a flat head screwdriver for leverage, pop the wheel out of its socket. 60 2 Clean the wheel and the socket where it is held. 3 Replace the wheel and push it down until it locks into place.
Sensors Dirt and dust on bObi’s wall and edge sensors can reduce her performance. Regularly cleaning these sensors ensures that bObi keeps working at her best. To clean bObi’s sensors: • Wipe the wall and edge sensors using a cloth slightly dampened with cold water or rubbing alcohol.
Blindfold Stickers Dark-colored carpet and certain floor patterns may seem like edges to bObi’s edge sensors. If bObi displays Error Code 01 (Er 01) on her remote while working on your carpet, you may need to “blindfold” her using the blindfold stickers that came in her box. To blindfold bObi: • Peel off the backs of each blindfold sticker and place one onto each of bObi’s 4 edge sensors. Make sure each sensor is completely covered.
Storing bObi should not be left unused with her power switch ON for more than 5 days. If you are not using bObi for an extended period of time, switch her OFF. Then, unplug the charging station, remove bObi’s battery, and store everything in a dry place at room temperature. Do not leave bObi in direct sunlight.
Troubleshooting & Checkup Test
Troubleshooting When bObi faces an uncomfortable situation, she stops and displays ER and a two-digit number on her remote. Each number corresponds to a certain issue bObi is having. If after attempting the suggested solutions bObi’s problem persists, you may want to perform a home checkup test (see page 72). You may also contact our customer care center at support@bobsweep.com, or call 1-888-549-8847 for support in the US and Canada. Our business hours are Monday – Friday 9 am – 5 pm, PST. Visit owners.
Error Codes Error Code 01 (Er 01): Edge Sensors bObi’s four, oval-shaped edge sensors are located on her underside, near her bumper. What to do: • Clean the edge sensors using a clean, dry cloth or compressed air. • If bObi displays Error Code 01 while working on dark-colored or patterned flooring, you may need to blindfold her (see page 61).
Error Code 02 (Er 02): Brushes What to do: • Remove bObi’s main and side brushes, and clean them thoroughly from end to end (see page 54). You may use a pair of scissors to cut hair or thread wrapped around bObi’s brushes, or a pair of tweezers to remove congestion from the ends of the brushes. • If bObi displays Error Code 02 while cleaning on a shag carpet or rug, you may remove her main brushes and allow her to clean without them, but she will not clean as effectively.
Error Code 03 (Er 03): Power System What to do: • Check bObi’s battery connection. Open the battery compartment and unplug the battery. Wait 30 seconds, then reinstall the battery. • Plug the charging adapter directly into the inlet above bObi’s power switch. Let her charge for at least 8 hours.
Error Code 04 (Er 04): Left/Right Wheels What to do: • Check bObi’s left and right wheels for jamming. • Remove the two screws around each wheel and use compressed air to remove debris inside the brush compartments.
Error Code 05 (Er 05): Dustbin What to do: • Remove the dustbin and empty it. Turn the dustbin around and gently wipe the metal plates on its bottom with a soft, dry cloth. • Look at where the dustbin connects to bObi’s body. Under the red plastic casing is the dustbin’s contact points. Make sure they spring freely and are not stuck or bent. • If one or both of the contact points are stuck, use a screwdriver to gently pull them out.
Home Checkup Test If bObi is not performing as well as she used to, you can diagnose the problem with a simple home checkup test. If bObi fails any part of the checkup test, she may need a replacement part. In this case, please call our customer care center at 1-888-549-8847 for toll-free support in the US and Canada, or email us at support@bobsweep.com. Our business hours are Monday – Friday 9 am – 5 pm, PST. To put bObi in checkup mode: 1 Flip bObi’s power switch OFF.
bObi will beep twice to confirm that she is in checkup mode. You may now release the OK button on the remote. The current and scheduled times should clear from the remote, and GO!, JUICE, and WAFFLE should all remain lit on bObi’s cover. The 5 lights above the touchscreen buttons should cycle sequentially. bObi is now in checkup mode. Note: The X’s are just a placeholder. Four digit number will vary. Checkup Mode Indicator Press RGHT on bObi’s remote to cycle through each step of the checkup test.
Step 1: Edge and Wheel Sensors The checkup mode indicator should read 0000. Numbers 1 – 4 at the top of the remote represent bObi’s 4 edge sensors, and the numbers 5 and 6 represent the 2 ground sensors inside bObi’s left and right wheels. Remove bObi’s side brush before testing her edge sensors. 1 With bObi on the floor, numbers 1 – 4 should be underlined to show that bObi’s edge sensors are working. 74 2 Lift bObi about 6 inches (15 cm) off the ground.
Step 2: Firmware Version While in mode 0000, press LEFT on the remote. The checkup mode indicator should read 0001. The main 4-digit number in the center of the screen indicates the firmware version of your bObi.
Step 3: Battery While in mode 0001, press LEFT on the remote. The checkup mode indicator should read 0002. The main 4-digit number in the center of the screen indicates the voltage of bObi’s battery in millivolts (mv). A fully charged battery should have a voltage between 1300 and 1600 mv. If the voltage is below 1400 mv, charge bObi for at least 8 hours and repeat this step. bObi should not be tested while she is charging. If bObi is fully charged and the voltage is 0000 mv, bObi’s battery is disconnected.
Step 4-1: Wall Sensors While in mode 0002, press RGHT on the remote. The checkup mode indicator should read 0100. Ignore the main 4-digit number in the center of the screen. Use a thick, flat, and white surface to imitate a wall in front of bObi. Drag the imitation wall from the left side of bObi’s front around to the right side. Numbers 1 – 5 at the top of the remote will become underlined one-by-one as you do this.
Step 4-2: Touch Sensors Do not press any additional buttons. Ignore the numbers on the main 4-digit number in the center of the screen. 80 touch sensors surround bObi’s front. While in mode 0100, press on any of the touch sensors on the left side of the bumper and the number 6 should be underlined. Do the same to the right side and the number 7 should be underlined.
Step 5: Usage Counter While in mode 0100, press RGHT on the remote. The checkup mode indicator should read 0200. The main 4-digit number in the center of the screen indicates the number of times bObi’s battery has been charged.
Step 6: Left and Right Wheels, Brushes, and Vacuum Motor Flip bObi over onto a flat surface. While in mode 0200, press RGHT on the remote. The checkup mode indicator should read 0300. As soon as bObi enters this mode, her wheels should drive forward, her brushes should rotate, and her vacuum motor should run. Numbers 1 and 3 at the top of the remote should be underlined, indicating that the left and right wheels’ speed sensors are working.
Step 7: Charging Station While in mode 0303, press RGHT on the remote. The checkup mode indicator should read 0400. The main 4-digit number in center of the screen should read 0000. Place bObi on her charging station with the nodes on her front resting against the plates on her station. The main 4-digit number in the center of the screen will now indicate the current bObi is receiving from the station. If bObi is not fully charged, the test mode indicator should read between 0400 and 0800.
Exit Checkup Mode To exit checkup mode, flip bObi’s power switch OFF at any time. When you switch bObi back ON, bObi will return to her normal working mode, and the remote will show the current time and scheduled time. If everything responds properly, bObi’s internal parts are working correctly. If you have any questions, contact our helpful team at support@bobsweep.com, for further assistance. Or, call us toll-free at 1-888-549-8847. Our hours are Monday – Friday 9 am – 5 pm, PST.
bObi’s Cleaning Behavior bObi’s cleaning pattern may look quite different from the way a human would clean. She may travel in a straight line, follow along walls, or zigzag across a small area. Sometimes she may seem to be ignoring some spaces or spending too much time on others — but don’t worry! Rest assured, bObi will efficiently clean your home within the course of a full cycle — just check bObi’s dustbin for the evidence! It is best to let bObi work in her own way, even if her movements appear odd.
Warranty & FAQs
Warranty Information Every bObi Classic purchased from an authorized seller includes a 1-year limited warranty, 5 years of subsidized visits to the bObsweep hospital, a lifetime of customer support. The warranty covers the battery and all labor and parts, except consumables like brushes, filters, and mopping cloths. Postal charges are also not covered by the warranty. To purchase additional coverage plans, go to owners.bobsweep.com click on bObi, and find coverage plans.
FAQs 1. Where can I find bObi’s how-to videos? bObi’s how-to videos can be found at bObi Classic’s owners’ corner at owners.bobsweep.com. 2. How long should bObi’s battery last? The exact time depends on the age of the battery and the type of surface bObi is cleaning. Generally, the smoother the surface (e.g. hardwood or tile), the longer the battery will last. When bObi is fully charged, she works on average 60 minutes. 3.
6. My bObi won’t turn on no matter what I do. If bObi does not start after flipping her power switch ON, her battery has likely drained too low to operate. To recharge, place her on her charging station with the metal nodes on her front resting against the plates on her station. Alternatively, you can unplug the adapter from the charging station and plug it directly into the inlet above bObi’s power switch. When bObi is charging, the center light on her cover will blink.
10. bObi is getting stuck under some of my furniture or traveling into areas with wires that tangle up the brush. How can I stop her from going into these areas? If bObi maneuvers under a piece of furniture and there is only one open entrance, she may need a few minutes to figure out how to escape on her own. You will not need to assist her when this happens, unless bObi stops cleaning completely and starts beeping.
12. When is a good time to use the Waffle function? The Waffle function is best for cleaning a small spill of dry substances. It is a great way to target only one area that has become dirty, such as a spill that must be swept or mopped in an otherwise clean area. 13. My bObi is stopping and showing an Error Code on the remote’s screen. How can I fix this? To understand bObi’s language, consult the Troubleshooting section of this manual for the cause of the problem as well as the solution (see page 67). 14.
End User License Agreement
IMPORTANT - READ BEFORE USING. Do not use the robot (“Bobsweep”) accompanying this license agreement (“Agreement”) until you have carefully read and agreed to the following terms and conditions. By using the Bobsweep, you agree to the terms of this End User License Agreement (“EULA”) and any amendment or addenda accompanying this Agreement. If you do not agree to the terms of this EULA, you may not use the Bobsweep.
warranty or condition, express, implied or statutory. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES, SO THE ABOVE EXCLUSION MAY NOT APPLY TO YOU. LIMITATION OF LIABILITY: THE ABOVE REPLACEMENT PROVISION IS THE ONLY WARRANTY OF ANY KIND. BOBSWEEP OFFERS NO OTHER WARRANTY EITHER EXPRESS OR IMPLIED INCLUDING THOSE OF MERCHANTABILITY, NON INFRINGEMENT OF THIRD- PARTY INTELLECTUAL PROPERTY OR FITNESS FOR A PARTICULAR PURPOSE.
bObsweep ® and © bObsweep Inc. All rights reserved.