Specification Sheet
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Form No. B-545-200
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2015 by Bobrick Washroom Equipment, Inc.
Technical Data
Y
Finish Face of Wall
33mm
(1-5/16")
2 Plcs.
S
S
Bar
Concealed
Setscrew (2)
Mounting
Flange (2)
Left Post
Right Post
S
S
95mm
(3-3/4")
2 Plcs.
13mm
(1/2")
2 Plcs.
12mm
(15/32") Dia.
83mm
(3-1/4")
2 Plcs.
49mm
(1-15/16") Dia.
2 Plcs.
Flange Cover (2)
19mm
(3/4") Dia.
2 Plcs.
L
MATERIALS:
Post — 18-8, type-304, 19mm (3/4") diameter, solid stainless steel rod. Post and Concealed Mounting
Threaded Flange are machined as one piece.
Bar — 18-8, type-304, 12mm (15/32") diameter, solid stainless steel rod. Secured to Posts with two(2) concealed set screws.
Concealed Mounting Threaded Flange — 18-8, type-304, 6mm (7/32") thick, stainless steel plate with thread on outside
edge for fastening cover. 46mm (1-13/16") outside diameter with two holes for attachment to wall.
Threaded Flange Cover — 18-8, type-304, 1mm (17-gauge), machined stainless steel. 49mm (1-15/16") diameter 13mm (1/2") deep. Cover
fastens over mounting flange to conceal mounting screws.
INSTALLATION:
For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with
sheet-metal screws (not furnished). For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal
screws (not furnished), or provide 3mm (1/8'') toggle bolts or expansion bolts. For partitions with particle-board or other
solid core, secure with sheet-metal screws (not furnished), or provide through-bolts, nuts, and washers. For hollow-core metal
partitions, provides a solid backing into which the sheet-metal screws (not furnaished) can be secured. NOTE: centerline-to-
centerline of mounting flanges must be within 2mm (1/16") of the Y dimension given.
SPECIFICATION:
Towel bar shall be type-304 stainless steel with ________________ (insert one satin finish or bright polished) finish. Towel bar
shall have two (2) 19mm (3/4") diameter posts. Bar shall be 12mm (15/32") diameter secured to post with two (2) concealed
set screws. Concealed mounting flange shall be 6mm (7/32") thick stainless steel plate, 46mm (1-13/16") outside diameter and
equipped with two screw holes for attachment and thread on outside edge to fasten cover. Threaded flange cover shall be 1mm
(17-gauge) stainless steel, 49mm (1-15/16") diameter and shall fasten over mounting flange to conceal mounting screws. Post
and mounting flange are to be machined as one piece.
Towel Bar shall be Model __________ (insert model number) of Bobrick Washroom Equipment, Inc., Clifton Park,
New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough,
Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United
Kingdom.
TOWEL BAR
B-545
B-5456
B-545 Satin-finish stainless steel
B-5456 Bright Polished stainless steel
Specify Model Required:
Bar
Length
L
Model
No.
STANDARD STOCK SIZES
Centerline-
to-Centerline
Y
B-545 x 18 460mm (18") 450mm (17-5/8")
B-545 x 24 610mm (24") 600mm (23-5/8")
B-5456 x 18 460mm (18") 450mm (17-5/8")
B-5456 x 24 610mm (24") 600mm (23-5/8")