Specification Sheet

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 6/30/15 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2015 by Bobrick Washroom Equipment, Inc.
Technical Data
6''
150mm
11-1/4''
285mm
S
S
3/4''
19mm
Typ.
10-9/16''
270mm
3-3/4''
95mm
Typ.
S
S
Pull Knob
Pull Knob
Adjustable Flanges
Door
Spillage Tray
Rough Wall Opening
11-1/2" (290mm) wide
10-7/8" (275mm) high
3" to 5-3/4" (75 to 145mm)
wall thickness
materials:
Cabinet — 18-8, type-304, 22-gauge (0.8mm) stainless steel. All-welded construction. Exposed surfaces have satin finish. Two
slots located on top and bottom for mounting.
Flanges (2) — 18-8, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Drawn and beveled, one-piece, seamless
construction. One mounting tab with screw hole located on top and bottom.
Doors (2) — 18-8, type-304, 18-gauge (1.2mm) stainless steel with satin finish. Each door is spring-loaded and secured to
cabinet with a full-length stainless steel piano-hinge. Doors equipped with cast-aluminum pull knob, interlocking mechanism,
and international graphic symbol identifying specimen cabinet.
Spillage Tray — 18-8, type-304, 24-gauge (0.6mm) stainless steel. All-welded construction.
operation:
Interlocking mechanism on self-closing doors prevent both doors from being open at the same time; provides sight-barrier for
complete privacy. Spillage tray is easily removed for cleaning.
installation:
Provide framed rough wall opening 11-1/2" wide x 10-7/8" high (290 x 275mm). Wall thickness may be from 3" to 5-3/4" (75
to 145mm). Allow clearance for construction features that may protrude into rough wall opening. Coordinate with mechanical
engineer to avoid pipes, vents, and conduits. Slide one flange onto cabinet so that screw holes in mounting tabs are aligned with
mounting holes in cabinet. Center cabinet in wall opening. Slide second flange into place, aligning tabs with mounting holes and
making certain entire perimeter of both flanges are tight against wall surface. Open one door and secure unit with four #10 x
1/4" (4.8 x 6.4mm) mounting screws (not furnished) through cabinet mounting holes and flange tabs at points indicated by an S.
specification:
Specimen pass-thru cabinet shall be type-304 stainless steel with all-welded construction; exposed surfaces shall have satin
finish. Flanges shall be drawn and beveled, one-piece, seamless construction. Spring-loaded doors shall be self-closing and
secured to cabinet with a full-length stainless steel piano-hinge. Doors shall be equipped with interlocking mechanism to
prevent the door from opening when the other door is open, providing sight-barrier for complete privacy. International graphic
symbol on doors shall identify specimen cabinet. Unit shall be furnished with a removable stainless steel spillage tray.
Specimen Pass-Thru Cabinet shall be Model B-505 of Bobrick Washroom Equipment, Inc., Clifton Park, New
York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough,
Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United
Kingdom.
recessed specimen
pass‑throUGh cabinet
b‑505