Specification Sheet

continued . . .
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 9/1/17 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2017 by Bobrick Washroom Equipment, Inc.
Technical Data
Grab Bar Backplate
6-1/8''
155mm
S S
1/2''
13mm
5-1/8''
130mm
8-3/4''
220mm
7-3/4''
195mm
S
S
1/2''
13mm
Mounting
Holes (4)
Bumper
61''
1550mm
33''
840mm
15-3/4''
400mm
To Centerline
of Toilet
29''
735mm
8-3/4''
220mm
Finish Face of Wall
Stud
61''
1550mm
33''
840mm
29''
735mm
35''
890mm
To Top
Adequate
Backing or
Anchor
Plates
Adequate Backing
(Not Furnished)
S
S
34''
865mm
From Top
Mfg. Screws
Grab Bar Backplate
Finish Face of Floor
MATERIALS:
Grab Bar — 18-8, Type-304, 18-gauge (1.2mm) stainless steel tubing with satin-finish. 1–1/4" (32mm) outside
diameter. Ends are heliarc welded to flanges.
Backplate — 18-8, Type-304, 3/16" (5mm) thick, satin-finish stainless steel with four screw holes for attachment
to wall.
SWING-UP
GRAB BAR
B-4998
Satin-finish
Satin-finish with peened gripping surface; add suffix .99 to model number
Specify Finish Required:

