Specification Sheet

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 6/05/16 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2015 by Bobrick Washroom Equipment, Inc.
Technical Data
9-3/4''
250mm
S
5''
125mm
4-1/4''
110mm
2-3/4''
70mm
S
S
S
12-1/4''
310mm
5''
125mm
Brake Springs (4)
materials:
Heavy-gauge chrome-plated steel with bright polished finish. Mounting bracket is 18-gauge (1.2mm). Equipped with vandal-
resistant self-locking mechanisms and four heavy-duty brake springs.
operation:
Heavy-duty brake springs provide controlled delivery. Toilet tissue rolls will not spin freely. Eliminates waste. Accommodates
two standard-core toilet tissue rolls up to 4-1/2" (115mm) diameter. Toilet tissue rolls cannot be removed from holder until
empty.
Instructions for changing toilet tissue roll:
1. Remove brown core of depleted toilet tissue roll from dispenser.
2. Spread apart arms, releasing center support.
3. Place new toilet tissue roll on center support.
4. Spread apart arms and push toilet tissue roll with center support back into dispenser.
5. Dispenser is loaded.
installation:
Mount unit on wall or toilet partition with four sheet-metal screws, furnished by manufacturer, at points indicated by an S.
For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with
sheet-metal screws furnished. For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws,
or provide 1/8" (3mm) toggle bolts or expansion bolts.
For partitions with particle-board or other solid core, secure with sheet-metal screws, or provide through-bolts, nuts, and
washers. For hollow-core metal partitions, provide solid backing into which sheet-metal screws can be secured.
specification:
Double-roll toilet tissue dispenser shall be heavy-gauge chrome-plated steel with bright polished finish. Unit shall be equipped
with vandal-resistant self-locking mechanisms, provide controlled delivery operation, and accommodate two standard-core toilet
tissue rolls up to 4-1/2" (115mm) diameter.
Double-Roll Toilet Tissue Dispenser shall be Model B-265 of Bobrick Washroom Equipment, Inc., Clifton Park,
New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough,
Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; Bobrick Washroom Equipment Limited, United
Kingdom.
double-roll toilet
tissue dispenser with
controlled delivery
b-265