Specification Sheet

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 11/09 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2009 by Bobrick Washroom Equipment, Inc.
Technical Data
13''
330mm
7-1/4''
185mm
10''
255mm
Typ.
Mop Holder
Hook
Shelf
Bracket
Shelf
S S
1''
25mm
Typ.
Y
Length
Finish Face of Wall
8''
205mm
S
S
S
6''
150mm
5-3/4''
145mm
MATERIALS:
Mounting Base and Shelf — 18-8, type-304, 18-gauge (1.2mm) stainless steel with satin finish. All-welded construction. Shelf
is 8" (205mm) deep with 3/4" (19mm) return edge on all three sides. Front edge is hemmed for safety.
Shelf Support Brackets — 18-8, type-304, 16-gauge (1.6mm) stainless steel with satin finish. Welded to mounting base and
shelf.
Mop/Broom Holders — Spring-loaded rubber cams with anti-slip coating. Plated steel retainers.
Hooks — 18-8, type-304, 12-gauge (2.8mm) stainless steel with satin finish. Each hook attached to mounting strip with two
rivets.
OPERATION:
Utility shelf with holders is designed to keep mops and brooms away from wall. Spring-loaded rubber cam holders
accommodate handles from 7/8'' to 1-1/4'' (22 to 30mm) diameter. Utility shelf above handle area provides clear access to
stored materials.
INSTALLATION:
Secure unit to wall with Phillips-head screws, furnished by manufacturer, at points indicated by an S. For plaster or dry wall
construction, provide concealed backing to comply with local building codes, then secure unit with screws furnished. For other
wall surfaces, provide fiber plugs or expansion shields for use with screws furnished, or provide 1/8" (3mm) toggle bolts or
expansion bolts.
SPECIFICATION:
Utility shelf with mop/broom holders and rag hooks shall be type-304 stainless steel with all-welded construction; exposed
surfaces shall have satin finish. Shelf shall be 18 gauge (1.2mm), 8" (205mm) deep with 3/4" (19mm) return edges, and shall
have front edge hemmed for safety.
Utility Shelf With Mop/Broom Holders And Rag Hooks shall be Model 239 x 34 of Bobrick Washroom Equipment,
Inc., Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment
Company, Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom
Equipment Limited, United Kingdom.
Model No.
B-239 x 34 34'' (865mm) NA 2 4 6 3
No. of Mop
Holders
No. of
Mtg. Holes
No. of
Hooks
Shelf
Brackets
Dim.
Y
Length
STANDARD STOCK SIZES
UTILITY SHELF WITH
MOP/BROOM HOLDERS
AND RAG HOOKS
B-239