Specification Sheet

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Rev. 06/30/15, R/A, S/D Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2015 by Bobrick Washroom Equipment, Inc.
Technical Data
X
Overall Length
A
S
C
L
2-1/4''
55mm
of Mop Holders
Z
Typ.
Shelf
Rag Hook
Mop Holder
Drying Rod
B
S
8''
205mm
S
S
6''
150mm
3''
75mm
2''
50mm
1-1/2''
40mm
MATERIALS:
Shelf — 18-8, type-304, 18-gauge (1.2mm) stainless steel with satin finish. Shelf has 1-1/2'' (38mm) return edge for maximum
rigidity.
Mounting Brackets — 18-8, type-304, 18-gauge (1.2mm) stainless steel with satin finish; welded to shelf.
Mop/Broom Holders — Spring-loaded rubber cams with anti-slip coating.
Rag Hooks — 18-8, type-304, 16-gauge (1.6mm) stainless steel with satin finish; secured to shelf with rivets.
Drying Rod — 18-8, type-304, 1/4'' (6mm) diameter stainless steel with satin finish.
OPERATION:
Surface-mounted utility shelf with holders is designed to keep mops and brooms away from wall. Spring-loaded rubber cam
holders accommodate mop or broom handles from 7/8'' to 1-1/4'' (22–32mm) diameter. Hooks for conveniently storing rags are
located on front of shelf. Rod for hanging wet rags is located below shelf between mounting brackets.
INSTALLATION:
Secure unit to wall with four sheet-metal screws, furnished by manufacturer, at points indicated by an S. For plaster or dry
wall construction, provide concealed backing to comply with local building codes, then secure unit with sheet-metal screws
furnished. For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws furnished, or
provide 1/8" (3mm) toggle bolts or expansion bolts.
SPECIFICATION:
Surface-mounted utility shelf with mop/broom holders and rag hooks shall be type-304 stainless steel with satin finish. Shelf
shall be 18 gauge (1.2mm) with 1-1/2'' (38mm) return edge. Mounting brackets, welded to shelf, shall be 18 gauge (1.2mm).
Utility Shelf With Mop/Broom Holders And Rag Hooks shall be Model 224x36 of Bobrick Washroom Equipment,
Inc., Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment
Company, Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom
Equipment Limited, United Kingdom.
Model
Number
Dim.
X
No. of Mop
Holders
Dim.
Z
No. of
Rag Hooks
Dim.
B
Dim.
A
B-224 x 36 36'' (915mm) 4 10-1/2'' (265mm) 3 6 -1/2'' (165mm) 23'' (585mm)
UTILITY SHELF WITH
MOP/BROOM HOLDERS
AND RAG HOOKS
B-224