Quick Start Guide

ManualsBrandsBlustream ManualsAccessories4-Way HDBaseT™ CSC Splitter - 70m

HSP14CS QUICK REFERENCE GUIDE

www.blustream.co.uk

• Advanced HDBaseT™ technology oering uncompressed video and audio with zero latency

• Advanced Colour Space Conversion (CSC) supports HDMI 2.0 18Gbps specification including HDR

• Features 1x HDMI input that is replicated to 4x HDBaseT™ outputs

• Features 1x HDMI loop out for integrating local displays or cascading to multiple devices

• Supports 4K 60Hz 4:4:4 UHD video up to 40m

• Extends HDMI 1080p video up to 70m

• Supports all industry standard video resolutions including VGA-WUXGA and 480i-4K

• Supports all known HDMI audio formats including Dolby TrueHD, Dolby Atmos, Dolby Digital Plus and DTS-HD Master Audio

transmission

• HDMI audio breakout to both analogue L/R audio and coaxial digital outputs concurrently

• Supports PoH (Power over HDBaseT™) to power compatible HDBaseT™ receivers

• Compatible with the following HDBaseT™ Blustream receivers - HEX70CS-RX (4K 60Hz 4:4:4), HEX70B-RX & HEX70ED-RX (4K

60Hz 4:2:0)

• Advanced EDID management

• HDCP 2.2 compliant

Our HSP14CS 4K HDBaseT™ CSC splitter distributes a single HDMI 2.0 4K 60Hz 4:4:4 source

to four simultaneous HDBaseT™ outputs. The HSP14CS splitter utilises CSC technology to

deliver HDMI, Bi-directional IR and PoH (PoE) up to lengths of 70m (40m 4K 60Hz 4:4:4) over

a single CAT cable. The 4-Way splitter also features audio breakout, EDID management and

HDMI loop out for integrating local displays or cascading to multiple devices.

KEY FEATURES

Introduction

Quick Reference Guide

HSP14CS

Upgrade

Output

HDMI

HDBT1 HDBT2 HDBT3 HDBT4InputPower

4-Way HDBaseT™ Splitter - Supporting 4K 60Hz 4:4:4 (40m)

Link

IR IN

0123

IR OUT

Coaxial

Audio Out

EDID DC 12V

L/R

Input Output

HDBT Output 4HDBT Output 3HDBT Output 2HDBT Output 1

HSP14CS

Summary of content (4 pages)

PAGE 1
HSP14CS QUICK REFERENCE GUIDE HSP14CS Quick Reference Guide 4-Way HDBaseT™ Splitter - Supporting 4K 60Hz 4:4:4 (40m) Output Power HDMI Input HDBT1 HDBT2 HDBT3 HDBT4 Upgrade Input Output Introduction HDBT Output 1 HDBT Output 2 0 1 Link Link Link Link HSP14CS HDBT Output 3 HDBT Output 4 IR IN IR OUT Coaxial L/R Audio Out 3210 EDID DC 12V Our HSP14CS 4K HDBaseT™ CSC splitter distributes a single HDMI 2.0 4K 60Hz 4:4:4 source to four simultaneous HDBaseT™ outputs.
PAGE 2
HSP14CS QUICK REFERENCE GUIDE Panel Descriptions Front Panel 4-Way HDBaseT™ Splitter - Supporting 4K 60Hz 4:4:4 (40m) Output 1 Power Input HDMI 2 3 4 HDBT1 HDBT2 HDBT3 HDBT4 Upgrade 5 6 1 Power button - press to power on / off the splitter 2 Power LED indicator - indicates if the unit is on or off 3 Input LED indicator - indicates if a source is attached and is active 4 HDMI output indicator - indicates if a HDMI output is attached and is active 5 HDBaseT™ output indicator - indicates if a
PAGE 3
HSP14CS QUICK REFERENCE GUIDE Understanding the Splitter / Receiver status lights The Blustream splitter and HDBaseT™ extender solutions include status LED indicators on both the splitter and receiver products to show all connections are active and to help diagnose possible problems. Understanding the status lights:Blustream HSP14CS splitter: • The Yellow HDBaseT™ status link light will be off when the zone output has been turned off or there is a problem with the specific splitter output.
PAGE 4
HSP14CS QUICK REFERENCE GUIDE Specifications • Video input: 1x HDMI Type A, female • Video output: 4x HDBaseT™ RJ45 connector, 1x HDMI Type A, female • Audio output:1x 3.5mm L/R analogue audio & 1x digital coaxial (RCA) • PoH (Power over HDBaseT™) supplied to compatible Blustream HDBaseT™ receivers from the splitter • IR input: 1x 3.5mm stereo jack • IR output: 1x 3.5mm mono jack • EDID: 4 pin dip-switch • Mounting kit included • Dimensions excl.