Quick Reference Guide

ManualsBrandsBlustream ManualsAccessoriesMulti Format HDBaseT™ Extender Set Supporting 4K up to 40m (1080p up to 70m)

HEX70HDU-KIT QUICK REFERENCE GUIDE

contact: support@blustream.co.uk | support@blustream.com.au

HEX70HDU-KIT

Our HEX70HDU-KIT extender kit is an industry leading 4K HDBaseT™ multi-format

solution delivering HDMI, USB-C and DisplayPort™ up to lengths of 70m at 1080p

(40m at 4K 60Hz 4:4:4) over a single CAT cable. The HEX70HDU-KIT provides

enhanced features including local HDMI input on the HDBaseT™ Receiver for

additional source input, Web GUI for control and configuration, auto display

control, audio breakout, bi-directional IR pass-through and EDID management.

The HEX70HDU-KIT has multiple control options including buttons on both TX

and RX units, IR, RS-232 and TCP/IP.

Introduction

FEATURES:

• Advanced HDBaseT™ technology oering distirbution of video and audio over a single CAT cable

• Features 1 x HDMI, 1 x USB-C and 1 x DisplayPort™ input on the HDBaseT™ Transmitter with manual or auto source

selection

• Features a local HDMI input on the HDBaseT™ Receiver for connection of a source device local to the display

• Supports 4K 60Hz 4:4:4 UHD video up to 40m

• Extends HDMI 1080p up to a distance of 70m over a single CAT cable

• Supports all known HDMI audio formats including Dolby TrueHD, Atmos, and DTS-HD Master Audio transmission

• Supports USB Type C up to 4K UHD 60Hz 4:4:4* (DP1.2 with 60W charging capability

• Supports DisplayPort up to 4K UHD 60Hz 4:4:4, 4K 30Hz 4:4:4 DP1.2

• Audio breakout to analogue L/R audio** and Coaxial digital (S/PDIF) outputs concurrently

• Supports Bi-directional PoC to power extenders from either Transmitter or Receiver end

• Bi-directional IR pass-through

• Auto display on / o feature allowing control of display at the HDBaseT™ Receiver via CEC, RS-232, or Relay

• Web interface module for control and configuration of HEX70HDU-KIT

• Control via front panel, IR, RS-232 and TCP/IP

• Advanced EDID and HDCP management

*USB-C video support is limited to 4K 60Hz 4:2:0 when charging feature is activated by the source device

**Analogue audio breakout supports 2ch PCM only

Summary of content (4 pages)

PAGE 1
HEX70HDU-KIT QUICK REFERENCE GUIDE HEX70HDU-KIT Quick Reference Guide Introduction Our HEX70HDU-KIT extender kit is an industry leading 4K HDBaseT™ multi-format solution delivering HDMI, USB-C and DisplayPort™ up to lengths of 70m at 1080p (40m at 4K 60Hz 4:4:4) over a single CAT cable.
PAGE 2
HEX70HDU-KIT QUICK REFERENCE GUIDE TX Panel Description 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 1 Power status indicator w USB Upgrade port 2 Local HDMI input signal link indicator e HDBaseT™ output 3 DisplayPort™ input signal link indicator r HDMI input - connect to source equipment 4 USB-C input signal link indicator t DisplayPort™ input - connect to source equipment 5 Remote (RX) HDMI input signal link indicator y USB-C input - connect to source equipment 6 Input /
PAGE 3
HEX70HDU-KIT QUICK REFERENCE GUIDE RS-232 Configuration & Control The RS-232 ports can be used for configuration / control of the product, as well as pass through of RS-232 commands between the serial ports of the HEX70HDU-TX and RX. By default, the Transmitter unit is allocated for control and feedback of switching, however this can be changed to the Receiver if required.
PAGE 4
HEX70HDU-KIT QUICK REFERENCE GUIDE Specifications HEX70HDU-TX Transmitter • Video Input Connectors: 1 x HDMI Type A, 19-pin, female; 1 x USB Type C; 1 x DisplayPort™ • Video Output Connectors: 1 x HDBaseT™ RJ45 connector • RS-232 Serial Port: 1 x 3-pin Phoenix connector • TCP/IP Control: 1 x RJ45, female • IR Input Ports: 2 x 3.5mm stereo jack • IR Output Port: 1 x 3.