Product Information

8 9 10
Enter into the blurams App, sign up for a free blurams account and
log in. Go to the home page and Click the "+" icon on the top right
corner, select your camera. Please follow the instruction on the App
interface to add your camera.
3. Add your camera into App
Your camera is ready to use. Thank you for choosing blurams.
www.blurams.com
[e-mail]
Congratulations！
If you encounter any troubles in product information, product
installation and use, please refer to the "Mine > Help And
Feedback" in blurams app or email at [e-mail].
FAQs
blurams strive for a high-quality product and user experience, we’re
eager to hear your feedback or suggestions. Send your feedback
through the App or email at [e-mail].
Give us your feedback
1 2 3
1 × Camera 1 × Power supply
1 × Positioning
paper
1 × Manual1 × Antenna
1 × Screw accessory
pack
Speaker
TF card slot
Reset button
Lens
Spotlight
Microphone
Antenna
Bracket
Photosensor
LAN port
Power supply
Packing list Get to know your camera
Pantone 306C
材质：105G哑粉 80*80MM
PANTONE color as below:
Pantone 1375C
blurams Facebook blurams Instagram
1 × Waterproof
tube
*A20
Outdoor lite 2
80mm
80mm
Outdoor Lite 2 A20
5
The camera has a power supply port and a LAN port. Waterproof
must be done on both these ports.
1. Wrap the power supply port with the waterproof tape as shown
below.
2. Wrap the LAN port with the waterproof tape or a waterproof
tube.
Using a waterproof tube on
the LAN port
Using the waterproof tape on
the power supply port
Wrapping with the waterproof
tube
Wrapping with the waterproof
tape
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules.
These limits aredesigned to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly
approved by the party.
Responsible for compliance could void the user's authority to operate this
equipment. (Example- use only shielded interface cables when connecting to
computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
FCC Radiation Exposure Statement:
The equipment complies with FCC Radiation exposure limits set forth for
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
FCC ID: 2ASAQ-A20
FCC Statement
Do not use the camera in the environment at too high or too low temperature, never
expose the camera under strong sunshine or too wet environment.The suitable
temperature for the product and accessories is -20℃-50℃.
The charger type is TEKA012-1201000EU, XED-CE120100CC, output voltage/current
is 12Vdc/1A. The plug considered as disconnect device of adapter. If you use a
third-party charger, the recommended output voltage/current of the adaptor is
12Vdc/1A, and the adapter shall be CE approval type.
RF exposure information: The Maximum Permissible Exposure (MPE) level has been
calculated based on a distance of d=20 cm between the device and the human body.
To maintain compliance with RF exposure requirement, use product that maintain a
20cm distance between the device and human body.
Operating Frequency Range： 2412 MHz ~ 2472 MHz
Max Output Power：< 20dBm
This product can be used across EU member states.
6
Download the App by searching "blurams" in the App Store or
Google Play. Alternatively, you can open a QR scanner App and
scan the blurams App QR code below to install the App.
2. Download blurams App
blurams App QR code
4
Plug the power adapter into a power outlet with cable connected.
Please use the items included in the original package for optimal
performance.
1. Plug in your camera
Power supply
LAN port
Multilingual Manual & Guide