En De Bluetooth Stereo-Headsest-Clip USER MANUAL 50500 Version V2.
En Contents Safety and General Information...............................................................................3 Product overview ....................................................................................................4 Structure and key definition .....................................................................................6 How to use Bluetooth Stereo-Headset-Clip .............................................................8 Paring ...........................................
Safety and General Information Please read the following information before using this product! Users are not permitted to make changes or modify the product and accessories in any way. • DO NOT put the small parts into mouth to avoid swallowing. • DO NOT use the product while operating a motor vehicle. • To avoid electronic interference and/or compatible conflicts, TURN OFF the product in any facilities where posted notices instruct you to do so.
Product overview • Designed for an active lifestyle, Bluetooth Stereo-Headset-Clip combines the stylish design and reliable technology in the ideal mini size units. • With Bluetooth wireless technology, Stereo-Headset-Clip gives you the convenient wireless way to enjoy the streaming stereo music transmitted from the Bluetooth A2DP(1*) - Source device such as a mp3 player, PC or PDA in the available range.
Notes: 1* The playback or its plug-in Bluetooth adapter/transmitter needs to support Bluetooth A2DP (Advanced Audio Distribution Profile). 2* The playback or its plug-in Bluetooth adapter/transmitter needs to support Bluetooth AVRCP (Audio Video Remote Control Profile). 3* The mobile phone needs to support Bluetooth HSP (Headset Profile) or HFP (Handsfree Profile) support Bluetooth A2DP (Advanced Audio Distribution Profile).
Structure and key definition (1) Multifunction button • Turn on the headset: Press the multifunction button for 3 seconds antil the blue LED flashes and there is a beep prompt from the headset. • Turn off the headset: Press and hold the multifunction button until the blue LED is on 2 times slowly and there is a beep prompt from the headset. • Enter Paring mode: Press the multifunction button for 8 seconds until the red and blue LED flash alternatively. • Answer a call: Press one time.
(2) (3) (4) (5) (6) (7) (8) (9) Microphone Button to select song in music mode (next song) Four-direction button for VOL+,VOL-, previous song, next song mini USB charging port 2.
How to use Bluetooth Stereo-Headset-Clip Paring Pairing is the process of establishing encrypted link between Stereo-Headset-Clip and Bluetooth devices. Step 1: In the off state, press and hold multifunction key for about 8 second until the red and blue LED flash alternatively. Step 2: Follow the operating instruction of your Bluetooth mobile phone to start the pairing process.
Step 3: The mobile will find Stereo-Headset-Clip headset and ask whether you are willing to connect your mobile with the headset. Press “Yes” or “Confirm” to confirm this action. Step 4: The mobile phone’s display should then prompt you for a passkey or PIN. Enter 0000 (a sequence of four zeros) and the display should prompt the pairing result. If the connection is successful, the blue LED of the headset will flash 3 times. Then blue LED will flash one time every 7 seconds.
Make a Call Step 1: Use the mobile phone’s keypad to dial the phone number. Step 2: Press mobile phone’s “Send” or “OK” key. The mobile phone initiates the call and transfer the call from the mobile phone to the headset. Normally speaking: if there is no disturbance between headset and mobile, the voice quality is better. Voice dialing (dialing a number by saying a name) It is possible to make a call directly from the headset using voice recognition.
End a Call Use either of the following methods to end a call. Method 1: Press multifunction key one time To end a call from the headset. Method 2: End a call from the mobile phone’s keypad. In the meantime you are answering or making a call, the headset will switch the connection from the music player (A2DP) to the mobile phone (HSP or HFP); moreover, the streaming music will be paused temporarily. After you ended the call, the music will be played and streamed to the headset continuously.
Answer a Call Step 1: If there is an incoming call while you are listening to the streaming music, you will hear beep prompt from headset. Step 2: Just press multifunction key one time. Notes: When you press multifunction key to answer or end a call, please just press one time. Do not press and hold. Adjust volume You can press the four-direction button of volume +/- key to adjust volume.
Redial the last dialed number Press and hold multifunction key for 2 second to redial the last dialed number. Trouble shooting If disconnection occurs, please check the following factors: 1. Ensure that the headset has enough power, is turned on and has been successfully paired to the mobile. 2. The Bluetooth function of the mobile is enabled. 3. Check whether the range between the headset and mobile is over 10 meters (about 30 feet).
Battery and Charging Notice We use rechargeable battery for Stereo-Headset-Clip. Please make sure the battery has been fully charged and fully released when the beginning of three times use it for keep the battery has the best performance. Always use correct AC Power Adapter to charge the headset. Using any incorrect power supply device will cause damage and void the warranty. After finished charging, please pull out the cable from the headset and plug the adaptor from the electricity outlet.
Do not use the headset in too hot or too cold environment. It is recommended to keep the environment temperature between 15°C and 25°C. Dot not install, place or use the headset near any source of heat such as a stove, radiator, oven, toaster, coffee maker or other apparatus (including microwave oven) that gives off heat.
- 16 -
De Bluetooth Stereo-Headsest-Clip BEDIENUNGSANLEITUNG 50500 Version V2.
De Inhalt Sicherheit und allgemeine Informationen ..............................................................19 Produktbeschreibung.............................................................................................20 Aufbau und Bedienung ..........................................................................................22 Bedienung des Stereo-Headset-Clip ....................................................................24 Paaren ........................................................
Sicherheit und allgemeine Informationen Bitte lesen Sie die folgenden Hinweise komplett durch, bevor Sie das Gerät benutzen! Veränderungen am Gerät selbst oder auch an seinem Zubehör sind streng untersagt und führen zum Erlöschen der Garantie! ACHTUNG: Kleinteile können verschluckt werden! 1. Verwenden Sie das Headset AUF KEINEN FALL im Auto. 2. Um Störungen mit anderen Geräten zu vermeiden, sollten Sie das Gerät AUSSCHALTEN, wenn Sie dazu aufgefordert werden.
Produktbeschreibung • Das Bluetooth-Stereo-Headset Stereo-Headset-Clip wurde für den aktiven Lebensstil entwickelt. Es vereint stylisches Design mit zuverlässiger Technik in handlicher Größe. • Durch die drahtlose Bluetooth-Technologie ermöglicht dieses Stereo-Headset Ihnen größtmöglichen Komfort beim Musikgenuss von einer in Reichweite befindlichen Bluetooth - A2DP(1*) - Quelle, beispielsweise einem MP3-Player, PC oder Palm.
Bluetooth-fähigen PC(5*), über den Sie dann Internetkommunikation mit Skype, MSN Messenger, Yahoo! Messenger und vielen anderen nutzen können. Anmerkungen: 1* Das Wiedergabegerät oder der daran verwendete Bluetoothadapter muss das Bluetooth-Profil A2DP (Advanced Audio Distribution Profile) unterstützen. 2* Das Wiedergabegerät oder der daran verwendete Bluetoothadapter muss das Bluetooth-Profil AVRCP (Audio Video Remote Control Profile) unterstützen.
Aufbau und Bedienung (1) Multifunktionsknopf • Um das Headset einzuschalten: Halten Sie den Multifunktionsknopf für ca. 3 Sekunden gedrückt, bis die blaue LED aufleuchtet und Sie im Headset einen Bestätigungston hören. • Um das Headset auszuschalten: Halten Sie den Multifunktionsknopf gedrückt, bis die blaue LED zweimal langsam blinkt und Sie im Headset einen Bestätigungston hören. • Paaren einschalten: Halten Sie den Multifunktionsknopf für ca. 8 Sek.
(2) Mikrofon (3) Im Musikmodus: Nächstes Lied. (4) Vier-Wege-Knopf für Lauter, Leiser, vorheriges Lied, nächstes Lied. (5) mini USB Ladeanschluss (6) 2.
Bedienung des Stereo-Headset-Clip Paaren Paaren wird der Prozess genannt, bei dem zwischen dem Stereo-Headset-Clip und anderen Bluetooth-Geräten eine verschlüsselte Verbindung hergestellt wird. Schritt 1: Ist das Gerät noch ausgeschaltet, drücken und halten Sie den Multifunktionsknopf für ca. 8 Sekunden, bis die rote und die blaue LED abwechselnd aufleuchten. Schritt 2: Folgen Sie der Beschreibung für Ihr Bluetooth-Handy (oder anderes Gerät), um das Paaren zu starten.
Schritt 3: Wenn das Handy das Headset Stereo-Headset-Clip gefunden hat, werden Sie gefragt, ob Sie Ihr Handy damit verbinden möchten. Bestätigen Sie dies mit “Ja”. Schritt 4: Auf dem Display des Handys wird nun eine Aufforderung zur PIN-Eingabe erscheinen. Geben Sie 0000 (vier Nullen) ein und das Paaren sollte beginnen. Wenn die Verbindung erfolgreich hergestellt wurde, wird die blaue LED dreimal blinken. Danach wird die blaue LED alle 7 Sekunden blinken.
Anrufen Schritt 1: Wählen Sie die gewünschte Telefonnummer auf den Tasten Ihres Handys. Schritt 2: Drücken Sie nun auf Ihrem Handy den Verbindungsknopf. Das Gespräch wird nun hergestellt und über das Headset übertragen. Normal sprechen: Wenn es keine Störung zwischen dem Headset und dem Handy gibt, ist die Gesprächsqualität besser. Sprachwahl (wählen der Telefonnummer durch Ansage) Mit dem Headset können Sie einen Anruf auch direkt über Spracheingabe starten.
Schritt 2: Wenn Sie einen kurzen Ton gehört haben, sagen Sie laut den Namen der Person, die Sie anrufen möchten. Anruf beenden Es gibt zwei Methoden, um ein Gespräch zu beenden: Methode 1: Drücken Sie den Multifunktionsknopf einmal, um ein Gespräch über das Headset zu beenden. Methode 2: Beenden Sie das Gespräch mit dem dafür vorgesehenen Knopf auf Ihrem Handy.
Wird auch HSP oder HFP unterstützt, dann läuft die Musik nicht einfach weiter, sondern wird für die Dauer des Gesprächs auf “Pause” gesetzt. Nachdem Sie Ihr Gespräch beendet haben, wird die Musik weiter abgespielt und auf das Headset übertragen. Anruf entgegennehmen Schritt 1: Bei einem eingehenden Gespräch während der Musikwiedergabe hören Sie einen Anklopfton im Headset. Schritt 2: Drücken Sie den Multifunktionsknopf einmal.
Wahlwiederholung Halten Sie den Multifunktionsknopf für 2 Sekunden gedrückt, um die letzte Nummer erneut zu wählen. Fehlersuche Im Falle einer Verbindungsunterbrechung prüfen Sie diese möglichen Ursachen: 1. Stellen Sie sicher, dass der Akku des Headsets noch genügend aufgeladen ist und dass das Headset eingeschaltet und mit dem zweiten Gerät verbundenist. 2. Stellen Sie sicher, dass die Bluetooth-Funktion des zweiten Gerätes eingeschaltet ist. 3.
Akku aufladen Im Headset Stereo-Headset-Clip wird ein wiederaufladbarer Akku verwendet. Bevor Sie das Headset zum ersten Mal verwenden, sollten Sie den Akku dreimal vollständig laden und entladen. Damit stellen Sie die bestmögliche Akkuleistung sicher. Verwenden Sie immer das richtige Ladegerät zum Aufladen des Akkus.
Verwenden Sie das Headset nicht an zu heißen oder zu kalten Orten. Die empfohlene Temperatur liegt zwischen 15°C und 25°C. Legen Sie das Headset niemals in die Nähe von Geräten, die große Wärme entwickeln, wie zum Beispiel Ofen, Heizung, Toaster, Kaffeemaschine, usw.
www.blu-max.