TDL2 Data Logger Manual Instruction WARNING Read Instruction Manual thoroughly before use and follow all safety precautions – improper use can void warranty and damage your device.
Content Introduction ...................................................... 2 Intended Use ..................................................... 3 Data Logger Installation ................................... 3 Hanger Installation.................................................. 3 BluConsole Account ........................................ 4 BluConsole System .......................................... 4 Blutag Application ............................................ 8 Enable NFC ............................
Intended Use This Blulog TDL2 Data Logger is designed to work only with dedicated software and accessories. Do not use the Blulog TDL2 Data Logger for any other purpose. Incorrect use may void the warranty and damage to the device. To reduce the risk of damage to the device: • Do not expose the devices to rain, water or excessive humidity. • Do not expose the devices to direct sunlight, heat or fire. • Store the devices indoors. • Never modify this devices in any way.
You can also generate a calibration certificate for each of the loggers by selecting the "Certificate" option in the "Loggers" tab. The file is available in .PDF format <50cm >50cm Creating Sub-Organizations Go to the "Organizations" tab and click on the "+" button at the top. You will be asked to enter the name, type (default customer), the parent organization (please indicate your organization in order to be able to download data from the registrars of this suborganization).
Change / add zone First, go to the "Zones" tab and click on the "+" button at the top. You will be asked to enter the zone name and which organization it should belong to. Then go to the "Loggers" tab, click on the serial number of the selected logger and change the zone to the one associated with it. You can also change the zone at once for a larger number of loggers that you choose. Hold ctrl button and click to select the desired loggers.
Configuring / creating notification types Go to the "Notification Types" tab and click on the "+" button at the top.
notifications. You can also apply the new notification definition for all zones (by selecting "All other zones") but for one specific type of alert (for example "Temperature out of range") End time of maintenance can be set by choosing “End of maintenance” Cyclic maintenance can also be set by selecting “Cyclic maintenance mode” Daily, weekly or monthly temperature reports Maintenance mode Go to the "Users" tab and click on the email address of the selected user.
Deleting a zone, organization or user Go to the "Zones", "Organizations" or "Users" tab, select a zone, organization or user. To delete, click on the "-" button at the top. Please note that when deleting a zone, it cannot be associated with any logger. To delete an organization, remember that it should not be associated with any logger, hub and / or zone. You can also enable NFC by clicking on the NFC icon on the drop-down menu accessible from the desktop.
Open the Blutag app and place your device in contact with the data logger. You will be directed to the main page where you can access information about the data logger. In the “Default” profile you can add the information regarding product description, producer, sender, recipient or even a tracking number. All these elements can help you to facilitate the logistics process.
Stop Recording To stop the recording click on the “Stop recording” button and place data logger near your device to complete the operation. In order to choose a manual start, just press the checkbox “Manual start with button”. For an instant start, just leave this checkbox unchecked. For a delayed start, just press on the “Date of recording start” or “Delay of start of recording” field and select your date and time or number of minutes.
Temperature Graph In order to access the temperature graph just press the “Temperature graph” button. Temperature graph enables you to see the history of measurement in form of a graph. Try to drag it with your fingers to widen or shrink the graph. choose to remember the decision to have PDF reports downloaded automatically at each reading. Click the “YES” button to save the report. If you click the “NO” button or if the question didn’t appear, follow the instruction below.
Location Tracking In order to update GPS position, first press on the “3 dots” icon on the top right. A drop-down menu will appear where you will be able to select “Settings”. WARNING Make sure you are connected to a carrier on your device. Press on the “3 dots” icon on the top right. A drop-down menu will appear where you will be able to select “GPS status”. If the GPS position was updated, the message should appear at the bottom with date and time of the update.
Creating Profiles In order to create or edit profile, press on the “spanner” icon on the top right. Change Profile Field In order to define a new profile field, press the “+” icon at the right menu. A new window will pop up where you will be able to choose a “Predefined field” or a “Custom field” from a drop-down menu. WARNING This section will enable you to create and modify profiles based on chosen fields with default values and even to create your own fields.
With a “Custom field” you can create a custom field name, as oppose to a “Predefined field” where you could only select from the list of preloaded field names. Press the “OK” button to create the profile. In order to edit a profile field, press the “pen” icon at the right menu. A new window will pop up where you will be able to make appropriate changes. Press the “OK” button to save the changes. In order to delete a profile field, press the “dust bin” icon at the right menu.
WARNING Inside “Wi-Fi Settings” you will be able to select your Wi-Fi network. Make sure to save changes before leaving the Profile Manager. If you won’t do so, a reminder window will pop up asking if you are sure about leaving the Profile Manager without saving changes. In order to save the changes press the “disc” icon at the top to save the changes. Recover AAR In order to recover AAR, press on the “3 dots” icon on the top right.
WARNING You can read the temperature by basically placing the logger near your device. It is not needed to select “Read temperature” beforehand. Blulog products are compliant with relevant requirements of EU health, safety and environmental protection standards. Blulog products are compliant with Directive 2002/95/EC, also known as RoHS. Blulog products must not be disposed of in the household trash, but only in accordance with local laws and regulations.
they would be within the safe harbor levels for exposure as published by Prop 65. Our products use Acrylonitrile Butadiene Styrene (ABS) plastic for enclosures, and Styrene is a precursor chemical used to make ABS plastic. Prop 65 identifies Styrene as a chemical that can cause cancer. Please note that PC and ABS plastics are not listed polymers under Prop 65, but the identified precursor chemicals are listed and in some cases these finished plastics may contain low levels of the chemical in the plastic.
Before receiving warranty service, Blulog or Blulog Distributor may require that you furnish proof of purchase details, respond to questions designed to assist with diagnosing potential issues and follow Blulog's procedures for obtaining warranty service. Following warranty service your Blulog Product or a replacement device will be returned to you as your Blulog Product was configured when originally purchased, subject to applicable updates. IMPORTANT: DO NOT OPEN THE BLULOG PRODUCT.
Return Blulog TDL2 Data Logger is considered as Custom orders and as such are NON RETURNABLE and CANNOT BE CANCELLED once placed due to the custom and made to order processes involved. Personalized or custom made devices cannot be returned for any reason. Any unauthorized use of these trademarks without the written consent of Blulog Sp. z o.o. and/or Blulog Distributor is strictly prohibited. Address Shipping Orders shipped via a freight forwarder to points outside Poland are NON-RETURNABLE.
