User's Manual

Few contents of software CD are different according to
particular product user purchased.
1. Please insert the Utility CD into your CD-ROM drive, and
then follow the instruction below to install Bluetooth
software: (Note! DO NOT plug the USB Dongle/Adapter
into the USB port before software installation)
Note: If the Auto-Run function of CD-ROM is enabled (in Windows, the
default setting of this function is usually enabled), then installation program
will start automatically. If not, you can utilize the Windows Explorer to browse
CD content and execute autorun.exe manually.
2. Follow the directions on your screen to install the
software.
1. Choose setup language
2. Initiate and follow up the setup processes
3. Finish the setup and reset the computer
3. As prompted, when software installation is complete,
restart your computer.
Insert BT007SX / BT009SX
[Windows XP/2000 operating system]
Software Installation
1. After the computer is restarted, you can see the shortcut
icon of BlueSoleil is added and the main window of
BlueSoleil is opened on the Windows desktop. Then, the
message popped up at the Windows toolbar will notify you
to insert the Bluetooth USB adapter.
2. Insert the USB adapter into the USB port of your
computer.
3. The Found New Hardware Wizard will automatically start.
Select “Install the software automatically
(Recommended)” and then follow the wizard to install the
Bluetooth USB adapter’s drivers.