BLUETAKE BT007Si / BT009Si Bluetooth USB Adapter User Manual
BLUETAKE BT007Si / BT009Si Bluetooth USB Adapter – User Manual DECLARATION No part of this User Manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of Bluetake Technology Co., Ltd.
BLUETAKE BT007Si / BT009Si Bluetooth USB Adapter – User Manual Contents Getting Start……………………………………..……………….4 Package Checklist……………………………………………….4 1. Introduction……………..…………………………5 1.1 Safety Precautions…………………….………………………………....6 1.2 System Requirements…………..…………………….…………….…...6 1.3 Product Specification……………….…………………………………...7 2. Bluetooth Software Installation………....…….8 2.1 Install the Software……………………………………………………….8 2.2 Insert the Bluetooth USB Adapter……………………………………..9 3.
BLUETAKE BT007Si / BT009Si Bluetooth USB Adapter – User Manual 4. Bluetooth Service Usage…………………..…..25 4.1 AV Headphone…………………………………………………………...25 4.2 Basic Imaging……………………………………………………………26 4.3 Dial-up Networking…………………………………..………………….27 4.4 FAX…………………………………………………………………………29 4.5 File Transfer………………………………………………………………29 4.6 Headset……………………………………………………………………33 4.7 Human Interface Device………………………………………………..34 4.8 LAN Access………………………………………………………………35 4.9 Object Push………………………………………………………………38 4.
BLUETAKE BT007Si / BT009Si Bluetooth USB Adapter – User Manual Getting Start Thank you for purchasing this versatile Bluetooth® wireless communication product manufactured by Bluetake Technology Co., Ltd. Before starting, please read this User Manual carefully to understand how to properly setup and use this product. Package Checklist Please check all items included in product package with the list below.
BLUETAKE BT007Si / BT009Si Bluetooth USB Adapter – User Manual 1. Introduction Bluetooth® Technology The Bluetooth ® wireless technology is a short-range radio technology being developing by Ericsson, Intel, 3Com, Nokia, Toshiba, and other well-known companies.
BLUETAKE BT007Si / BT009Si Bluetooth USB Adapter – User Manual 1.1 Safety Precautions Please follow the safety precautions carefully before you use the “Bluetooth USB Adapter” device and the application software. Please make sure that you use the product correctly. z Please follow regional rules for Bluetooth wireless technology use. z Do not allow any child attempting to swallow the product. z Do not attempt to disassemble or alter any part of the product that is not described in this manual.
BLUETAKE BT007Si / BT009Si Bluetooth USB Adapter – User Manual 1.3 Product Specification Product General Radio BLUETAKE BT007Si / BT009Si Bluetooth USB Adapter - BT007Si: Bluetooth Class I, up to 100 meters radio coverage in open space - BT009Si: Bluetooth Class II, up to 10 meters radio coverage in open space - Carrier Frequency: 2.4 ~ 2.483GHz Spread Spectrum FHSS (Frequency Hopping Spread Spectrum) Bluetooth Data Rate Up to 1 Mbps Antenna Printed Antenna I/O Interface USB 1.
BLUETAKE BT007Si / BT009Si Bluetooth USB Adapter – User Manual 2. Bluetooth Software Installation 2.1 Install the Software IMPORTANT! If you have any Bluetooth software previously installed on your computer, you must completely remove it first! 1. Insert the BT007Si / BT009Si Utility CD into the CD drive of your computer. The install application will automatically start.
BLUETAKE BT007Si / BT009Si Bluetooth USB Adapter – User Manual 2.2 Insert the Bluetooth USB Adapter IMPORTANT! Be sure to install the BlueSoleil Bluetooth software and restart the computer BEFORE you insert the Bluetooth USB adapter! [Windows XP/2000/ME/98SE operating system] 1. After the computer is restarted, you can see the shortcut icon of BlueSoleil is added and the main window of BlueSoleil is opened on the Windows desktop.
BLUETAKE BT007Si / BT009Si Bluetooth USB Adapter – User Manual [Windows XP SP2 operating system] 1. After the computer is restarted, you can see the shortcut icon of BlueSoleil is added and the main window of BlueSoleil is opened on the Windows desktop. Then, the message popped up at the Windows toolbar will notify you to insert the Bluetooth USB adapter. 2. Insert the USB adapter into the USB port of your computer. 3.
BLUETAKE BT007Si / BT009Si Bluetooth USB Adapter – User Manual 3. BlueSoleil Console BlueSoleil is an Windows-based software from IVT that allows your Bluetooth® enabled desktop or notebook computer to wirelessly connect to other Bluetooth enabled devices. BlueSoleil allows MS Windows users to wirelessly access a wide variety of Bluetooth enabled digital devices, such as cameras, mobile phones, headsets, printers, and GPS receivers.
BLUETAKE BT007Si / BT009Si Bluetooth USB Adapter – User Manual Fax √ File Transfer √ √ Headset* √ √ Human Interface Device √ LAN Access √ √ Object Push √ √ Personal Area Networking √ √ Printer √ Serial Port √ √ Synchronization √ √ Notes: - Only one Headset or AV Headphone connection can exist at a time, since there is only one virtual Bluetooth audio device. - The Headset and AV Headphone Profiles do not work on Windows 98SE or Windows Me.
BLUETAKE BT007Si / BT009Si Bluetooth USB Adapter – User Manual 3.2 BlueSoleil Main Window By default, BlueSoleil starts with the Main Window open. Use the Main Window to perform your primary connection operations. The Main Window displays the local device (red ball) as well as the remote devices detected in range. Different icons distinguish different types of remote devices. At the top of the Main Window are Service Buttons.
BLUETAKE BT007Si / BT009Si Bluetooth USB Adapter – User Manual Services — Icon Meanings White — Idle. The normal state. Yellow — Available. The service is available on the selected device. Green — Connected. The service is active in a connection with the remote device. Services — Operations Hover your mouse over the service icon to display the name of the service. Single-click on the service icon to connect. Right-click on the service icon to display a pop-up menu of related operations. 3.
BLUETAKE BT007Si / BT009Si Bluetooth USB Adapter – User Manual 3.4 Search for Other Bluetooth Enabled Devices Before it can connect, your computer must first detect other Bluetooth enabled devices in range. 3.4.1 Initiate a Device Search 1. Make sure that the Bluetooth enabled device you wish to connect to is turned on, with sufficient battery power, and set in discoverable mode. Have any necessary passkeys ready. If necessary, you may also need to enable the service you want to use on the remote device.
BLUETAKE BT007Si / BT009Si Bluetooth USB Adapter – User Manual 3. After a few seconds, an icon will appear around the center ball for each Bluetooth enabled device detected within the radio range. Note: - The Main Window can display only eight discovered devices at a time. If BlueSoleil discovered more than eight devices, use the scroll bar to view the remaining devices discovered by BlueSoleil. - To sort the devices by device name, device address, or device type, click View | Arrange Devices. 4.
BLUETAKE BT007Si / BT009Si Bluetooth USB Adapter – User Manual - If you start another search by pressing F5, then the list of previously detected devices will be cleared. 3.5 Establish Connection Note: These are generic instructions for any type of Bluetooth enabled device. Refer to the instructions in Chapter 4 for specific details for the type of service you plan to use. Normally, a connection is initiated from the client.
BLUETAKE BT007Si / BT009Si Bluetooth USB Adapter – User Manual 2. If the icon for a service is highlighted (yellow), then the service has already been started. If the icon is white, then you need to start the service in order to use it. Right-click the icon. In the pop-up menu, select Start Service. The icon should now be highlighted (yellow). Serial Port icons will also report which COM port is assigned to them.
BLUETAKE BT007Si / BT009Si Bluetooth USB Adapter – User Manual 1. Return to the Main Window. Click View | Main Window. 2. Double-click on the icon for the device you wish to connect to. BlueSoleil will begin to search for information about which services the device supports.
BLUETAKE BT007Si / BT009Si Bluetooth USB Adapter – User Manual 3. After the search, icons will be highlighted (yellow) at the top of the BlueSoleil Main Window for services that are supported by the device. Verify that the service you want to use is supported. 4. Right-click on the device icon. In the pop-up menu, click Connect, then select the service. BlueSoleil will start the connection.
BLUETAKE BT007Si / BT009Si Bluetooth USB Adapter – User Manual 7. When the devices have successfully connected, the device icon in the Main Window will turn green, and a green line will appear between the red ball and the device icon. A red dot will travel along the green line from the client to the server. A signal strength icon will also appear next to the device icon. The BlueSoleil icon in the task tray will also turn green to indicate an active connection.
BLUETAKE BT007Si / BT009Si Bluetooth USB Adapter – User Manual Note: You can only disconnect this way if your computer is acting as a client device. If your computer is acting as a server device, then you can disconnect in BlueSoleil by clicking View | Service Window, then right-clicking on the service icon. In the pop-up menu, click Stop Service. Alternatively, you can disconnect from the remote device.
BLUETAKE BT007Si / BT009Si Bluetooth USB Adapter – User Manual 3.6 Bluetooth Security To modify your connection’s security settings, click My Bluetooth | Security. BlueSoleil offers three security levels: Low (Security Mode 1, Non-secure) No security procedure is needed for connections. Medium (Security Mode 2, Service level enforced security) Authentication or Authorization is requested when a specific service is accessed by other Bluetooth enabled devices.
BLUETAKE BT007Si / BT009Si Bluetooth USB Adapter – User Manual Note: In Security Mode 2, the user can add each authenticated device into a trusted device list to expedite future connections.
BLUETAKE BT007Si / BT009Si Bluetooth USB Adapter – User Manual 4. Bluetooth Service Usage 4.1 AV Headphone The AV Headphone Profile enables use of a Bluetooth enabled headphone to listen to high-quality stereo music played on a computer. Typical Usage - Listen to music using a Bluetooth enabled AV headphone. Step 1: Connect to the AV headphone, following the instructions in Chapter 3. Step 2: Play music using media player software on your computer. Music will transmit wirelessly to the headphone.
BLUETAKE BT007Si / BT009Si Bluetooth USB Adapter – User Manual 4.2 Basic Imaging The Basic Imaging Profile (BIP) enables users to receive pictures from a Bluetooth enabled digital camera, mobile phone, or other compatible device. It also enables remote control of shooting, display, and other imaging functions.
BLUETAKE BT007Si / BT009Si Bluetooth USB Adapter – User Manual - Receive Pictures Step 1: Step 2: Step 3: Assign the directory where you would like to save image files pushed from the client device. Click My Services | Properties. Click on the Basic Image Push tab. In the Set the image directory field, browse to select the file location. Click OK. Start the BIP service, following the directions in Chapter 3. Send pictures from the remote device.
BLUETAKE BT007Si / BT009Si Bluetooth USB Adapter – User Manual Note: After you successfully connect, you can also select Save Connection As Shortcuts to create a desktop dial-up shortcut. This would allow you to conveniently dial up and connect by simply clicking on the shortcut, without having to manually start BlueSoleil. - Dial-up to the Internet via a Bluetooth enabled modem. Step 1: Connect to the modem’s Dial-Up Networking Service, following the instructions in Chapter 3.
BLUETAKE BT007Si / BT009Si Bluetooth USB Adapter – User Manual 4.4 FAX The Bluetooth Fax Profile enables users to send faxes from a computer via a Bluetooth enabled mobile phone or modem. Typical Usage - Send fax via a Bluetooth enabled mobile phone. - Send Fax via a Bluetooth enabled modem. - Send fax via a Bluetooth enabled mobile phone Step 1: Connect to the mobile phone’s fax service, following the directions in Chapter 3. Step 2: Use your fax software to send the message.