BlueIOT Anchor BlueIOT (Beijing) Technology Co., Ltd BA3000-t E-mail：info@blue-iot.com website：www.blue-iot.com USER MANUAL V1.
Contents 1.Overview 1.1. Product Introduction 1. Overview 1 1.1. Product Introduction 1 1.2. Typical Applications 1 functions such as precise locating, trace uploading and status collection of personnel and 2. Panel and Port 2 objects indoor, while having high accuracy, high concurrency, low power consumption, 2.1. Anchor Front Panel 2 2.2. Anchor Back Panel 3 3. Installation and Power Supply 4 3.1. Installation 4 3.2. Power Supply 5 4.
2. Panel and Port 2.2. Anchor Back Panel 2.1. Anchor Front Panel The back panel of the Bluetooth AOA Location Anchor is used for installation and The diagram and meanings of the product front panel are as follows. unmounting, as shown in below figure. RJ45 network port 1 Reset button Label area RJ45 network port 2 Network indicator Power Indicator Location indicator Number Meaning Status Description Green when connected through ethernet.
3. Installation and Power Supply jammer, WiFi jammer) in the vicinity of the installation location. 3.1. Installation Avoid objects that can easily cause signal reflection, such as large size metal, large This product is generally mounted on ceiling, but can also be suspended or installed screen. otherwise depending on the specific structure of the building ceiling. Before installation, The location anchor should have large visual coverage without obstruction.
4. Network Connection 5. Data Collection 4.1. Wired Network The Bluetooth anchor is mainly used to receive and collect the locating and data There are mainly two types of wiring methods between the location anchor and the information sent by the Bluetooth tag. Its effective collection area is related to the on-site deployment, and the number of tags that can be collected is related to the frequency of server, as shown in Figure 4.1.1 and 4.1.2: tag data transmission.
ture standards and limits. BlueIOT Anchor will become warm when plugged in to a industrial chemicals, including near evaporating liquified gasses such as helium, may power source. damage or impair BlueIOT Anchor functionality. Obey all signs and instructions. Radio frequency exposure BlueIOT Anchor uses radio signals to connect to Bluetooth Choking hazard Some BlueIOT Anchor parts may present a choking hazard to small Tags.
8. Disposal and Recycling Information for BlueIOT Anchor (which may result from use, misuse, don't know how to use or product defects). The seller reserves the right to overhaul or replace (new products or newly overhauled replacement BlueIOT Anchor disposal and recycling products) device or software. This is the sole and exclusive remedy for any breach of the Your BlueIOT Anchor should not be disposed of with household waste. Dispose of your warranty terms.
10. IP Statement Trademark statement "BlueIOT" trademarks, logos, and trademark combinations are registered trademarks of BlueIOT(Beijing) Technology Co., Ltd. 11. Responsibility Statement The product is an auxiliary tool, which cannot replace any safety management system, measure and rescue solution for hazardous operation or supervision system and measure for operation management.
12. Appendix - Basic Specifications BA3000-t BlueIOT Anchor Frequency 2.4GHz - 2.485GHz Locating Accuracy Up to 0.1 m Interface Type Ethernet RJ45 Interface Speed 10/100Mbps Interface Protocol UDP/TCP Interface Connect Distance Maximum 100m Transmission medium CAT5+ Dimensions 220mm×220mm×32mm Weight 620g Power Supply Interface IEEE 802.3af POE Voltage / Current 48V / 0.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
