User's Manual



User Manual



BC2500 GPS Beacon



Dec 30, 2019



CONTACT



sales@bluecats.com BlueCats

+1.256.217.4072 6767 Old Madison Pike NW, Suite 300

www.bluecats.com Huntsville, AL 35806, USA

PAGE 1
User Manual BC2500 GPS Beacon Dec 30, 2019 CONTACT sales@bluecats.com +1.256.217.4072 www.bluecats.com 320-0424 BlueCats 6767 Old Madison Pike NW, Suite 300 Huntsville, AL 35806, USA © BlueCats, 2019. All rights reserved.
PAGE 2
Page 2 Introduction The BC2500 GPS beacon is attached to vehicles, trailers, and equipment in an outdoor yard, in order to track their locations and movements. Operating instructions 1. Open the box and inspect the BC2500 GPS beacon. 2. Remove the “REMOVE BEFORE USE” label (and the small round magnet under it) to activate the beacon. 3. Install screws in the mounting holes on either side of the enclosure and use them to attach the beacon to a vehicle, trailer, or equipment to be tracked. 4.
PAGE 3
Page 3 Regulatory Information FCC This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.