RFR900 Smart Terminal user manual BLUEBIRD version 1.
About this manual RFR900 provides high quality features for a smart terminal using Bluebird’s creative ideas and technological expertise. This user manual is designed to help users use the device effectively. • Please read this manual carefully before using the device for safe and proper use. • This device may only be used in countries where it is sold. • The components and colors of this device in this manual may differ from the actual product.
Trademarks BLUEBIRD is an emerging global brand, striving to lead the market in performance and mobility. Their products represent reliability, innovation, and innovative technology. BLUEBIRD is a registered trademark from the global brand of Bluebird Inc. and is copyright protected. • • • • • • Pidion and stylized Pidion Logo are registered trademarks and symbols of Bluebird Inc. Qualcomm® IZat™ is a registered trademark of Qualcomm Atheros, Inc. Adobe® is a registered trademark of Adobe Systems Inc.
Overview Package Components The package includes: RFR900 device Battery Battery cover Micro USB cable Optional accessories: Protection film, adapter plug (220 V), Power adapter for direct charging, 1-slot cradle, 1-slot cradle power adapter, 4-slot cradle, 4-slot cradle power adapter, vehicle charger, user manual To purchase optional accessories, contact your sales representative. You can download your user manual from www.mypidion.com. However, the paper version may be available for some regions.
Your Device Front Back 4 Overview
Battery RFR900 uses a 3,500 mAh Lithium-ion rechargeable battery. Install the provided battery before starting to charge the device. Installing the Battery 1 Turn the battery lock counterclockwise to unlock the battery cover. 2 Use the notch and lift the battery cover. Remove the cover completely. CAUTION When removing the battery cover, be careful not to damage your fingernail. Do not try to pull the battery cover excessively. It may damage the cover. 3 4 Insert the battery.
Charging the Battery Charge the device first when using the device for the first time or have not used it for a long time. The device can be charged with a charger or a cradle. You can also charge the battery by connecting it to your computer with the provided micro USB cable. When the battery is low, the device will emit a sound and display a low power message. When it is charging, the charging lamp will show red light. When the battery is fully charged, it will turn to green light.
Device Specifications Dimensions (mm) Weight (g) Battery Physical Characteristics Interface Key Indication Standard 3,500 mAh Extended X Hotswap X USB O Power O Mode Change O Reset X LED Power Output 5ea EU: 1/2W ERP JP: 1/2W EIRP US: 1W EIRP Russian Federation: 1/2W ERP Antenna Type RFID User Environment Freq. Range EU: 865-868 MHz JP: 918-920 MHz US: 902-928 MHz Russian Federation: 866.0-867.6 MHz Standards Supported GEN2 V2 Operating Temp. -10°C to 50°C Storage Temp.
Troubleshooting The battery does not charge properly. • Ensure that your device and the charging cable is connected and the LED lamp is working properly. • If the battery does not charge completely, it may be dead or defective. Replace a battery with new one. (The warranty period for battery replacement is six months.) The battery life got shorter. When you use network data or peripheral device such as wireless LAN or Bluetooth that require more power, your device may use more battery than usual.
Safety and Handling WARNING Please read this safety and handling information carefully. Failure to follow the information provided may result in fire, electric shock, or other property damage or bodily injuries General precautions These simple guidelines will help you for operating your device properly, maintaining it safe, and experience satisfactory services. Device • To not scratch the device’s touchscreen. Use your finger or only compatible pen.
Battery and charging • Improper battery use may cause fire, explosion, or other hazard. • If the battery is taken apart by impact, applied heat, submersion, or hole-drilling, there is a risk of a dangerous explosion. Keep away from children and animals. • Do not make any improper contact on battery contact pin with necklaces, coins or any electric conductors. Do not give any impact with sharp objects. There is a risk of explosion. • Use only the approved battery and charger.
This device was tested for typical body-worn operations with the back of the handset kept 0.39 inches (1cm) between the user’s body and the back of the handset. To comply with FCC RF exposure requirements, the handset must be kept 0.39 inches (1cm) from the body without any reference to a particular side or edge. Any beltclips, holsters, and similar accessories containing metallic components may not be used. Body-worn accessories that cannot maintain 0.
IEC 60417-6044 Do not listen to sound at high volume for long periods. It may cause hearing damage. Also, only use compatible receiver, headphones, or earpieces with your device. CE Hereby, Bluebird Inc. declares that this RFR900 is in compliance with the essential requirements and other relevant provisions of directive 1999/5/EC. To comply with CE RF exposure requirements, the handset must be kept 0.59 inches (1.5cm) from the body without any reference to a particular side or edge.
Warranty and Support Warranty certificate Thank you for purchasing a product from Bluebird Inc. • If a circumstance arises where you lose a receipt or the certificate of guarantee, then the term of guarantee will be calculated 3 months (certified by the number of the manufacture, a certificate of inspection) after the date of manufacture. • In case of accessories such as batteries, only those that match the sales list managed by the service center will be eligible for customer service.
Customer support IMPORTANT Before asking for after-sales service, please back up the data from the terminal. We do not back up data from the products received in the Customer Care Center. Therefore, we assume no responsibility for loss/deletion of data. Customers service center SSang-young IT Twin tower, B703 531, Dunchon-daero, Jungwon-gu Seongnam-si, Gyeonggi-do South Korea 462-727 • Fax: +82-2-548-0870 • Email: mookseven@bluebird.co.kr • Hours: 9:30 a.m. - 6:30 p.m.
- Use of programs that might effect the program (over-clock, forceful changes in the input of the system, personal developments) • Default due to a mistake on the part of the customer - Default due to inappropriate or careless use of the product (dropping, submersion under water, shock, damage, unreasonable operations, etc) - Default due to a repair or unauthorized technician - Default caused intentionally or by carelessness of the customer - Default due to the use of fraudulent parts or components • Other
User Manual BLUEBIRD Copyright (C) 2016 Bluebird Inc. All rights reserved www.mypidion.