www.bluebirdsoft.com Counter Top Portable Payment Terminal CT360 User’s Manual . Please read the following warnings before using the product. . Shapes and colors of the images shown in this manual may differ from the actual products. . Contents of the manuals may differ based on the software version of products or conditions of the wireless provider.
• This user manual is protected by copyright. • This user manual has been created by the Bluebird Soft. We have done our best not to create typos, editing errors, and leaving out any information. Please understand if there are any inconveniences. • This product’s program is legally protected. Illegal copying, transmitting, or erasing of the program is prohibited. • This product’s partial functions might have problems from the environment, user program, and other machines.
FCC (Federal Communications Commission) This device complies with Part 15 of the FCC`s Rules. Operation is subject to the following two Conditions: 1. This device may not cause harmful interference, and 2. This device must accept ant interference received, including interference that may cause undesirable operation. This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference.
Contents Notice Before Using Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Precautions Before Using Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 About the product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 1. Checking components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2. Checking names of parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Notice Before Using Device This information is for your own safety. Please observe the following precautions. WARNING • This device is qualified for the standard of the safety of human body against electromagnetic wave. For your own safety, please use certified devices provided by headquarter. If not the case, we cannot guarantee your safety. • Do not press power button on the device if the device is wet or do not touch adapter or power cord with wet hands. There is risk of electric shock.
Precautions Before Using Battery WARNING These are safety precautions in order to prevent a dangerous accident. Please use the battery correctly and carefully observe the instructions. • If the battery is taken apart by impact, applied heat, submersion, or hole-drilling, there is a risk of a dangerous explosion. Please keep away from children and animals. • Leaving the battery in the vehicles under direct sunlight or any enclosed space with hot temperature can deform or break down the battery.
About the product 1. Checking components The images in this User’s Manual may not reflect the color and shape of the actual product. Please contact the Customer Care Center if you wish to purchase any additional or optional products.
About the product 2. Checking names of parts Conn.
About the product 3. Buttons The front panel includes the following features: • A terminal display, Backlight LCD screen. • Five types of keys: 1. 12-key, numeric keypad. 2. Four ATM-style function keys, labeled F1 to F4, below the LCD screen. 3. Four unlabeled, programmable function keys above the keypad. 4. Three color-coded function keys below the keypad (from left to right: CANCEL,BACKSPACE/CLEAR, ENTER). • Built-in MSR is located at the right side of the device.
About the product 4. Connection Ports There are connection ports available on back side of the terminal. The ports are covered by protect cover. Various ports are provided in order to connect CT360 with any external peripheral devices, data communication or power supply. USB HOST 9V POWER USB HOST 9V ETHERNET RS232 1/2 ETHERNET RS232 1/2 LINE USB USB DEVICE DEVICE POWER LINE Shows the connection ports for CT360 terminal.
USB HOST 9V POWER ETHERNET RS232 1/2 USB DEVICE About the product LINE 5. Establish Telephone Line Connections Connect the telephone cord to the communication port on the terminal, then route it directly to a telephone wall jack.
Changing the printing paper 1. Opening the Printer Cover Unlatch the paper roll cover located on the top of the terminal. Lift the cover up to open. Remove any partial roll of paper in the printer tray by lifting up. 2. Closing Paper Roll Cover Please be careful not to insert printer paper in the opposite direction. Tear the paper off against the top case in the printer.
Paying with card 1. Paying with MSR The card can be swiped in both directions. Please swipe the card. 2. Paying with IC Card Insert IC card. IC chip needs to go in first. Please make sure that insert the card all the way in.
Learning Basics 1. Insert / Remove the battery 1-1. Insert the battery 1 Push your battery in the direction of the arrow. 2 Put on the battery cover in the direction on the arrows. 1-2. Removing the battery 1 Slide down the battery cover to open it. 2 Lift the battery in the direction of the arrow.
Learning Basics 2. Insert / Remove the USIM card 2-1. Insert the USIM card 2-2.
Learning Basics 2. Insert / Remove the microSD card 2-1. Insert the microSD card 1 Open the storage card holder by lifting up the flap. 2 Insert the microSD card into the storage card holder with its gold contacts facing out.
Learning Basics 2-2. Removing microSD card 1 With the USIM card and storage card compartment opened, lift the storage card holder flap to open it. 2 Remove the microSD card.
Learning Basics 3. To Connect the Terminal Power As you see in the picture, connect the adapter with the power cable to charge the power. • When The battery of the device is low, it may warn you with a ring and a message. WARNING • The charging time can vary depending on the environment. A new battery is only partially charged. Please charge fully before using.
Device Specifications PAYMENT OPTIONS MSR • Bi-directional, Triple track (Tracks 1, 2, 3)CT360 Contact Payment • ISO 7816, 1.
Q&A Q Water went into my device. What do I do? A First, remove your battery from the device and dry them in a dry place. After drying for a period of time, try to turn it on. If it still does not turn on, the main-board or other parts needs to be replaced. Please contact to your service center. Q It won’t turn on. A The program may be damaged. Please try resetting your device. If it still doesn’t work, contact to your service center. Q It won’t charge.
Service Center Before Requesting After-Sales Service Before asking for after-sales service, please back up the data from the terminal. We do not back up data from the products received in the Customer Care Center. Therefore, we assume no responsibility for loss/deletion of data. Bluebird Soft Customer Service • FAX : +82-2-548-0870 • E-Mail : mookseven@bluebird.co.kr • Address : 1242, Gaepo-dong, Gangnam-gu, Seoul, Korea Operating hours • Mon.-Fri. : 9:30 A.M. ~ 6:30 P.M.
Service Center Charged Service 1. If it is not a default, it will be charged when requesting for after-sales service. - Service request due to inappropriate use of the customer - Loss of a PIN number - Use of programs that might effect the program (over-clock, forceful changes in the input of the system, personal developments) 2.
Warranty Certificate Thank you for purchasing a product from Bluebird Soft Inc. • If a circumstance arises where you lose a receipt or the certificate of guarantee, then the term of guarantee will be calculated 3 months (certified by the number of the manufacture, a certificate of inspection) after the date of manufacture. • In case of accessories (such as batteries), only those that match the sales list managed by the service center will be eligible for customer service.
Customers Service Center Hours Mon. ~ Fri. : 9:30 A.M. ~ 6:30 P.M. (GMT Time: +9 Hours) We are not open on Saturday, Sundays and National Holidays. Address 1242 Gaepo-dong, Gangnam-gu, Seoul, Korea Bluebird constantly strives to bring utmost satisfaction to all our customers.
