-Before starting, ensure that you read and follow the “Safety Warnings and Precautions” section of this manual.
Safety Warnings and Precautions : Please follow the instructions to properly use the product and avoid accidents in advance. 1. Exercise precautions when using the battery - If the batteries are damaged, severely shocked, heated, exposed to moisture or high temperatures, or bored by a gimlet, it may explode. - Keep batteries away from children and pets. 2. Do not use PDA phone in explosion areas. 3. Do not use PDA phone on an aircraft or inside a hospital. 4.
Contents I. Safety and precautions – Warning and cautions II. Contents 1. Product composition 2. Get to know the product 1) Left, front, right side of product 2) Button introduction 3) Specifications 3. Getting started 1) Connecting and disconnecting the battery 2) Charging battery 3) Using PDA 4. Start connecting network 1) Scan 2) ear jack (Converter) 3) Reset PDA 4) Host PC connecting 5) IrDA 사용 Using IrDA 6) Bluetooth 7) How to Use Wireless Manager 8) Using memory card 5.
Product Composition The following illustrations may differ from actual products. Please contact our customer center to purchase additional or optional products. [BIP-5000 PDA 1 unit] [Power cable] BIP-5000 [BIP-5000 Cradle 1 unit] [Adapter] [Battery (standard)] [USB cable] [Stylus] [User manual] Copyright © 2005 Bluebird Soft, Inc. All Rights Reserved.
Knowing the product 1. Front, left side, back, right side Barcode scanner window Antenna Speaker Camera Flash Power(LED) Barcode/ Camera Button GSM (LED) Barcode/ Camera Button Reset ear jack IrDA Power button Hand Strap Call button Microphone Alpha key Function key [Front] BIP-5000 Enter key Battery Case Fixed screw [Right side] [Back] [Left side] Copyright © 2005 Bluebird Soft, Inc. All Rights Reserved.
Knowing the product 2. Button introduction Use it to turn on/turn off the PDA Laser(1D,2D) Barcode / Camera Type : Press left button to use barcode scanner Press right button to use camera CMOS Barcode Type : Use right and left button to activate barcode. Execute after user input Change character input mode. Default mode is numeric. Press once for lower case English, press twice for capital English, press three times for special characters. Execute program and make phone connection.
Knowing the product 3. Specifications Contents CPU Intel PXA270 520MHz OS Window Mobile 5.0 DISPLAY 3.5”, 240 x 320 / 260,000 color INTERFACE 1 x USB 1.1 Client / Host 1 x RS-232C Mini-SD slot IrDA 1.2 (Option: Bluetooth class ) CAMERA 2.0M pixel camera BATTERY 2000mAH SIZE 79.5(width) x 150.3(length) x 34.9thickness) mm WEIGHT 314 g ADAPTER BIP-5000 Description 5V 2.4A Copyright © 2005 Bluebird Soft, Inc. All Rights Reserved.
Knowing the product 3. Specification FCC Compliance Statement FCC NOTICE: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This devices may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part15 of the FCC Rules.
Knowing the product 3. Specification European Union Notice This product satisfies all the technical regulations applicable to the product within the scope of Council Directives 1999/5/EC, 89/336/EEC and 73/23/EEC. Radio : ETSI EN 301 511 / ETSI EN 300 328 EMC : ETSI EN 301 489-1/7/17, EN 55022, EN 55024, EN 61000-3-2/-3 Safety : EN 60950-1 Health : EN 50360 / EN 50361 BIP-5000 Copyright © 2005 Bluebird Soft, Inc. All Rights Reserved.
Knowing the product 3. Specification FCC RF EXPOSURE INFORMATION WARNING! Read this information before using your phone In August 1996 the Federal Communications Commission (FCC) of the United States with its action in Report and Order FCC 96-326 adopted an updated safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies.
Getting started 1. Connecting and disconnecting the battery [Connecting the battery] • Sit the battery to the groove, Put the cover and swivel the screw [Disconnecting the battery] • Swivel the screw in arrow direction until detached, take off battery * Battery must be taken off after turning off the PDA. Sudden power break may cause the PDA malfunction. BIP-5000 Copyright © 2005 Bluebird Soft, Inc. All Rights Reserved.
Getting started 2. Charging the battery [While connecting the adapter to the table charging cradle] *Connect the adapter with table charging cradle as showed [While connecting the adapter to PDA directly] * Connect the converter attached jack with PDA • Note: Using the provided/approved adapter is the most safely and effective way to use PDA. BIP-5000 Copyright © 2005 Bluebird Soft, Inc. All Rights Reserved.
Getting started 2. Battery charging method [Battery charging and working time] Working time Talk time Standby time Standard (2000mhA) 4 hours Charging Time Time 12 hours (LCD on, backlight off), 200hours (LCD off) Standard (2000mhA) Less than 4 hours (main battery), less than 72 hours (backup battery) *Modem power turns off automatically to prevent the battery power damage. Use is after recharging. *The battery talk time and standby time can be different from the specification in various conditions.
Getting started 3. Getting started [Turn the PDA] - Power Button * Press power button to turn on the PDA * Depress power button for 2 seconds in the condition of PDA is turned on, the Front light will be turned on or turned off. BIP-5000 Copyright © 2005 Bluebird Soft, Inc. All Rights Reserved.
Getting started 3. Getting started Using Stylus (using method of stylus, dragging, pressing method) * Using stylus to select, execute and move the items in the screen. # Get stylus from PDA # Tapping Stylus : Tap the icon in the screen for once by using stylus to select or execute the item, like clicking the mouse left button. # Dragging Stylus : Using dragging stylus to select several items, characters and images, like dragging the mouse.
Getting started 3. Start to use PDA [Calibration] *Using stylus to select, execute, move the item in screen. ▪ Press the stylus to the targeted center target accurately, and doing the same when the target move to up left, down left, down right, up right (This is to settle the input value of stylus in LCD screen. BIP-5000 Copyright © 2005 Bluebird Soft, Inc. All Rights Reserved.
Getting started 3. Start to use PDA [Starting Windows Mobile] [Initialization the screen of Win CE] ▪ Click on the Start Button on the upper left corner of the title bar and the Start Menu appears. *The following figure is shown after the initialization wizard finished. Start Button Title Bar Start Menu Today Screen Program Execution and Option Setting BIP-5000 Copyright © 2005 Bluebird Soft, Inc. All Rights Reserved.
Get to know the product 3. Start to use PDA - To use the Function keypad - The following functions will be executed after pressing the function key and button.
Connecting to the network 1. Scan [Using laser Scanner] [Using CMOS Scanner] [correct] [incorrect] [correct] -Barcode can be read in every direction * Face the PDA the barcode as shown and press left/right button to use. BIP-5000 Copyright © 2005 Bluebird Soft, Inc. All Rights Reserved.
Connect to the network 1. Scan [Basic test method of laser barcode] 1) Run notepad 2) Create new notepad file 3) Face the scanner to the barcode and press barcode button. 4) The captured barcode value is shown in the new notepad. • Please consult the program’s manufacture for using the special barcode program. BIP-5000 Copyright © 2005 Bluebird Soft, Inc. All Rights Reserved.
Connect to the network 1. Scan [Basic CMOS barcode test method] 1) Run notepad 2) Create the new notepad file 3) Face the scanner to the barcode and press barcode button. 4) The read barcode value is shown in the new notepad. • Please consult the program’s manufacture for using the special barcode program. BIP-5000 Copyright © 2005 Bluebird Soft, Inc. All Rights Reserved.
Connect to the network 2. Using method of ear jack [Using ear jack] • Take off the ear jack cover and plug it straight into the PDA as shown. BIP-5000 Copyright © 2005 Bluebird Soft, Inc. All Rights Reserved.
Connect to the network 3. Reset PDA [Reset] Reset button • Press reset softly by using stylus * Soft reset can be used to restart the PDA when there is error occurred and PDA stopped working. Same as computer reset, all the unsaved data will be lost. BIP-5000 Copyright © 2005 Bluebird Soft, Inc. All Rights Reserved.
Connect to the network 3. Reset the PDA [Hard reset] • Perform the hard reset using Stylus and buttons. • Hard reset is used when the soft reset doesn’t work. The PDA will turn to the original condition after being hard reset. All the installed program in RAM, documents, settings will be lost after doing hard reset. •Please backup the data and program before doing hard reset, we will not be responsible for any data and data/program lost. BIP-5000 Copyright © 2005 Bluebird Soft, Inc.
Connect to the network 3. Host PC connection method [Connect the cradle] * Connect the PDA (cradle) -cable-computer as shown [Connect to PDA directly] * Connect PDA-cable-computer as shown • ActiveSync can be used after connecting the PC or notebook to copy the files or install the new program by synchronizing the PDA with PC. BIP-5000 Copyright © 2005 Bluebird Soft, Inc. All Rights Reserved.
Connect to the network 4. IrDA using method [IrDA using method] [Executing screen] Sample) 1. Start->Setting • Matching the IrDA port as shown (transmission 2. Select WL transmission after pressing “connect” tab. speed is fastest when the distance at shortest) 3. Click “OK” after check “receiving all the incoming WL” 4. Searching for the opposite IrDA port 5. Press “OK” after sending the data BIP-5000 Copyright © 2005 Bluebird Soft, Inc. All Rights Reserved.
Connect to the network 5. Bluetooth using method Activate the Bluetooth device such as Bluetooth printer and card reader. ▪ Example of Using the Bluetooth. ① Path: [Start] -> [Settings] ② Click on the [Connections] table and then Select [Bluetooth]. ③ Under the [Mode] tab, check ‘Turn on Bluetooth’ and click on [OK]. ▪ Turn on Bluetooth - Depending on checking the option, it is either In Use or Not in Use Status.
Connect to the network 5. Bluetooth using method Other Bluetooth devices are scanned and paired. ▪ Example of Using the Bluetooth ① Path: [Start] -> [Settings] ② Click on the [Connections] table and then Select [Bluetooth] ③ Under the [Devices] tab, select ‘New Partnership... ※ When other Bluetooth devices are recognized, the model name of the product and an icon appears as shown in the Figure. ※ When nothing is recognized, an message to indicate that nothing was found appears.
Connect to the network 6. How to Use Wireless Manager With the Comprehensive Wireless Manager Function, it assists to use Bluetooth and Wi-Fi (Wireless LAN) in an easy and simple way. ▪ Example of Using the Wireless Manager ① Path: [Start] -> [Setting] ② Click on the [Connections] table and then Select [Wireless Manager] ③ Select either ‘Wi-Fi’ or ‘Bluetooth’ button ※ Depending on the communication specification of the terminal, the Support Items for Wireless Manager can vary.
Connect to the network 7. Memory card using method [Insert Mini SD card] Memory Card * Push the memory card into the slot as shown until it’s plugged. BIP-5000 [Take out Mini SD card] Memory Card * Press the memory card down deeply as shown and it will bounce out and get detached. Copyright © 2005 Bluebird Soft, Inc. All Rights Reserved.
ActiveSync connection 1. Install ActiveSync ▪ Download the installation file for ActiveSync from http://www.microsoft.com/korea, and run the setup.exe ▪ When the following window appears, click “Install”. ▪ When the following window appears, click “Next”. ※ This is for Microsoft ActiveSync 4.1 - Korean. In using other versions, the Menu selections and functions in the manual can be different. BIP-5000 Copyright © 2005 Bluebird Soft, Inc. All Rights Reserved.
ActiveSync connection 1. Install ActiveSync ▪ After installation is done, click “Finish”. ▪ Depending on your PC environment, the Wizard may ask you to restart your PC. In this case, restart your PC. ※ When you first connect BIP-5000 to PC, the New Hardware Search Wizard of the PC is activated. ※ If you have already installed Microsoft ActiveSync, you do not need to install an additional driver program. ※ During first installation, the terminal may not be able to connect to the PC.
ActiveSync connection 1. Install ActiveSync ▪ In order to use ActiveSync, connect PDA to PC or Laptop by using the USB cable. Or, after fitting PDA in a cradle, connect the cradle to PC by using the USB cable. ▪ Open file finder of your PC, and copy files you want. After all files are copied, move the files to PocketStore. ▪ If PDA is turned on when connected to PC, PC will automatically detect it and execute ActiveSync. ▪ Press ActiveSync Search button and activate Mobile installation window.
Using PDA phone Using call program 1) Dial number a. Dial a phone number or a speed dial number b. Number can be cleared by using [CLR] button c. Press [SEND] button to make a call - Redail function: Without inputting numbers, press the [SEND] button to redail the lasted call number d. Communication is available after the call being connected - Redail option and times can be set in SETTING-OPTION automatically when the connection failed. - Call time is shown on the screen e.
Using phone program Phone program screen [Send] 1) Push and make a start the phone program. 2) Enter the phone number. 3) Edit the phone number with . 4) or make you phone call. • Re-send function: Automatically make a phone call which is the last number you input 5) Connecting. • Talking time will show up on the screen. [Receive] 1) With ringing ‘Calling’ sign will be shown on the screen. 2) Push and it will be connected.
Using Wireless LAN Features Using Wireless LAN Features 1) The “WLAGS4681” menu window appears. cf) If the “WLAGS4681” menu window does not appear, double click “ ”in the tool bar. 2) Click “Wireless Information”, select the corresponding AP, and select “Connect”. cf) If the AP information does not exist, enter it manually. 2-1) Double click “Add” in the AP list window. 2-2) When the wireless network properties window appears, enter the corresponding AP in “Network Name (SSID)”.
Cautions : When you don’t follow below instructions, Injury or damage can be occur Cautions 1. Use only the approved accessories and components provided by BluebirdSoft Inc. to insure user safety. 2. Do not turn on the PDA while it’s wet, and don’t touch the adapter or power cord with wet hands. This may cause electric shock. 3. Never reconstruct, disassemble, or repair the product arbitrarily. Always contact a service center authorized by BluebirdSoft Inc.
Appendix 1. Q&A Q. What should I do if the PDA is dropped into water? A. Firstly detach the battery from PDA and dry them. If PDA doesn’t work properly after being dried, contact A/S center for repairing main board and other components. Q. Can’t turn on the PDA. A. Program can be damaged. Reset the PDA, and if it doesn’t work properly after that, contact A/S center for repair. Q. PDA can’t be charged. A. Make sure that PDA and cradle are properly connected, and check if the lamp is turned on.
Appendix 2. Accessories 이미지 준비the 중 Preparing image [Portable Adapter] [Stylus] BIP-5000 [Vehicle Adapter] Preparing the 이미지 준비 중 image [Ear-jack] [Leather case] Copyright © 2005 Bluebird Soft, Inc. All Rights Reserved.
