User Manual Model: BM-150 (WLAN) Bluebird Soft, Inc.
Safety Warnings and Precautions Please follow the instructions to properly use the product and avoid accidents in advance z Battery Handling Precautions -If the batteries are damaged, severely shocked, heated, exposed to moisture or high temperatures, or bored by a gimlet, it may explode -Keep batteries away from children and pets. -Never store batteries where they will be exposed to direct sunlight, or subjected to high temperatures in a hot vehicle, near a heat source etc.
Manual Contents 1. Getting Started.................................................................................................4 1.1 Unpacking the box contents.........................................................................4 1.2 Each parts’ name and function.....................................................................4 1.2.1 Each part’s name...................................................................................4 1.2.2 Function Button..........................................
1. Getting Started 1.1 Unpacking the box contents 1.2 Each parts’ name and function 1.2.1 Each part’s name 1 3 2 10 14 11 16 19 17 20 18 12 21 15 22 13 4 6 5 7 9 23 8 [Front] [Left Side] [Back] 1.
2. Charging indicator(LED): Charging RED. Charging Complete: Green 3. Phone Condition indicator: It informs the currency use area and a SMS receiving state 4. Call Button 5. Menu Button 6. Call Close Button 7. Schedule Button 8. Mic:: it uses voice call or record 9. Speaker: it uses when listening to music or voice heard over the phone 10. Ear Jack: the place to insert ear mic or ear converter 11. Top/Bottom moving Button 12. Hold button 13. Reset button 14. External GPS antenna connecting part 15.
When checking schedule - Adjust volume during talking - Checking the function by progressively (Same as Navigation up & down key) - Adjust volume from MP3 Camera menu when use camera when set up the PDA locking 1.3 Battery usage 1.3.1 Battery Load/ Unload Fit battery into bottom of back side groove Push the arrow way till make a click sound PUSH 1.3.2 Charge with cradle. After connect adaptor with cradle, put battery into cradle of extra battery groove until it make a click sound. 1.3.
such as key. 1.3.4 Ramp status during charging. charging Status of charging ramp Charged PDA Cradle PDA Cradle PDA Red OFF Green OFF Set cradle PDA Red OFF Green OFF Set cradle battery Red Cradle PDA, Set battery (PDA Green Green Red Green Green Red Orange Green Green Charge Completed) Cradle PDA, Set battery (Battery Charge Completed) • If red ramp of cradle is keep blinking, it means battery didn’t fit into cradle properly so that take out battery and put that again.
2.2 Text input 2.2.1 English Keyboard input [Keyboard input] ① Select Keyboard input screen ② Select Language and then type it.. . 3. MP3 Player 3.1 Listen to Music ① Press , then . ② Window Media Player will be played. 4. Microsoft ActiveSync This chapter will explain how to install Microsoft ActiveSync on your computer and how to set partnership between your devices. ActiveSync is installed in your device beforehand, therefore, reinstallation is not necessary.
2) When the box above appears, select a folder to install the program and press Next. 3) If your device is not connected to your computer after installation, [Get Connected] configuration window will appear. Or if your device is connected, it goes to next step automatically. 4) To connect BM-150 to your desktop • Connect the power supply and connect the USB cable to your desktop. • Put BM-150 in the USB cradle. a.
restart your computer. c. The connection between your PC and the device can fail if it is the first time. If it fails, click OK button and try again. 6) When connected, the box below appears. Select ‘Yes’ and press next. If it is temporary connection, select ‘No.’ 7) When ‘Standard Partnership’ is selected, the box below appears.
8) To synchronize your device, choose an option and press Next. Then the box below will appear. 9) Select programs to synchronize and press Next, then the box below will appear. 10) “Press Finish to complete the setup wizard. 4.1.2 Cautions Regarding Microsoft ActiveSync 1) Getting Started a. Uninstall previous version of ActiveSync program. b. Install the latest version of Active Sync3.7.1. When the ‘Get Connected’ dialogue appears during installation, press ‘Cancel.’ c.
dialogue shows up, it is because error-occurred driver still remains. Open ‘Control Panel’ Æ System Æ Device Manager Æ Windows CE USB Devices Æ uninstall the device with an error. 2) When ‘Unknown Device’ box shows up after your PC detects USB device a. This happens when power supply is connected while your device is put in the cradle. b. Take the device out of the cradle and put it in again. 3). ‘Connecting’ status lasts for long in the ActiveSync a. Take the device out of the cradle and cut connection. b.