#. www.bluebird.co.kr www.mypidion.
This user manual is copyright protected. This user manual has been created by the Bluebird Soft. We have done our best not to create typos, editing errors, and leaving out any information. Please understand if there are any inconveniences. This product’s program is legally protected. Illegal copying, transmitting, or erasing of the program is prohibited. This product’s partial functions might have problems from the environment, user program, and other machines.
FCC compliance This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If it is not installed and used in accordance with the instructions, it may cause harmful interference to radio communications.
FCC (Federal Communications Commission) This device complies with Part 15 of the FCC`s Rules. Operation is subject to the following two Conditions: 1. This device may not cause harmful interference, and 2. This device must accept ant interference received, including interference that may cause undesirable operation. This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference.
&RQWHQWV /PUJDF #FGPSF 6TJOH UIF %FWJDF 1SFDBVUJPOT #FGPSF 6TJOH UIF #BUUFSZ (FUUJOH 5P ,OPX :PVS %FWJDF Getting to know your device’s each part 7 Getting to know the buttons 9 -FBSOJOH #BTJDT 2 Insert/Remove the battery Insert/R
BIP-1500 Letter recognizer Transcriber %FWJDF 4QFDJGJDBUJPOT 1IPOF Making a Call Receiving a Call
1RWLFH %HIRUH 8VLQJ 'HYLFH This information is for your own safety. Please observe the following precautions This device is qualified of electromagnetic wave human safety standards. For your own safety please use the authenticated devices only from the head company. If not the case, we cannot guarantee your safety. Do not press the power button or the power adepter/ cord when the device is wet. There is a danger of electrical shock. Do not remodel, take apart, or repair the device.
BIP-1500 Please refrain from using your device while driving. If you are in an unavoidable situation, stop your vehicle or use your hand free kit. Do not use in places of high temperature and high humidity. The following can be the causes of malfunction: getting wet from the rain, spilling drinks, and taking it in with you at the sauna (high temp.) In these cases, you cannot receive your free repair service. Do not place credit cards, phone cards, bankbook, and tickets next to the device.
3UHFDXWLRQV %HIRUH 8VLQJ %DWWHU\ These are safety precautions in order to prevent a dangerous accident. Please use the battery correctly and carefully observe the instructions. If the battery is taken apart by impact, applied heat, submersion, or hole-drilling, there is a risk of a dangerous explosion. Please keep away from children and animals. Please use only the designated battery for the device. If the original battery is not used, the device’s life may decrease and there is a risk of explosion.
*HWWLQJ WR NQRZ \RXU 'HYLFH BIP-1500 (FUUJOH UP LOPX ZPVS EFWJDF T FBDI QBSU Speaker On button Reset button On State LED Communicating State LED Screen Barcode Scan Button Battery Cover Button Shoulder Strap Holder 7
*HWWLQJ WR NQRZ \RXU 'HYLFH Hand Strap Holder Printer Cover Battery Cover Printer Cover Button Battery Cover Button Camera Flash Stylus Pen Holder Barcode Scanner Window 8 BIP-1500 Manual Barcode Scan Button Stylus Pen
BIP-1500 (FUUJOH UP LOPX UIF CVUUPOT Buttons Power Button Reset Button Details Turns on the device Soft reset All the programs running will close and the device will restart. Hard reset The device will reset into factory mode.
*HWWLQJ WR NQRZ \RXU 'HYLFH Buttons Fn Button Enter Button Mode Change Button < #*1 /VNFSJD ,FZQBE > 10 BIP-1500 Manual Details This button’s function is used as a combination. It is used when the blue printed button is used. You can change the row you are typing in. It functions the same as the computer enter button. This is a button that changes the mode of Local language/Alpha. Capital/ Alpha. Lower Case. When pressed at the number mode, the Alphabet lower case and symbols will be activated.
BIP-1500 Buttons Details It moves one space at a time and erases the written information. BKSP Button It is the same is the computer’s back space button. If pressed down for more than 3 seconds it will quickly erase consecutively. Direction Button Buttons Details Numbers / Alphabet Capitalized / Symbols Default state is Number mode and you can input Alphabet or Symbols. F1 ~ F9 Button It is used with Fn as a combination. You can customize these buttons. It is used when moving Up/Down/ Left/Right.
*HWWLQJ WR NQRZ \RXU 'HYLFH Buttons Details Direction button Used when moving Up/Down/Left/ Right Caps Lock Button Tab Button Erase / Backspace Button Approval OK / Check Button < #*1 28&35: ,FZQBE > 12 BIP-1500 Manual
BIP-1500 Buttons Details Flash Button Fn Button SPACE Button (moves one space forward) Numbers / Alphabet / Symbols button Default is Number mode and you can input Alphabet or symbols. F1 ~ F9 Button You can customize these buttons.
/HDUQLQJ %DVLFV *OTFSU 3FNPWF UIF CBUUFSZ 1-1. Insert the battery 1 Push your battery in the direction of the arrow. 2 Put on the battery cover in the direction on the arrows. nly use the supplied adapter to charge your battery. O The batter cover supports high-capacity batteries. Option accessory module only supports the standard batter.
BIP-1500 1-2. Removing the battery 1 Press both of the battery cover buttons on the side and slide the battery cover out. 2 Lift the battery in the direction of the arrow.
/HDUQLQJ %DVLFV *OTFSU 3FNPWF UIF 64*. DBSE 2-1. Insert the USIM card 2-2. Removing the USIM card Slide in the USIM card in the arrow direction. Push the top of the USIM card to slide it out in the arrow direction. The devices supports 2 USIM slots.
BIP-1500 *OTFSU 3FNPWF UIF .JDSP4% $BSE 3-1 Insert the MicroSD Card 3-2 Removing the MicroSD card In the arrow direction, slide in the MicroSD card with the metal terminal facing up. Press push do slide the MicroSD card out.
/HDUQLQJ %DVLFV $IBOHJOH UIF QSJOUJOH QBQFS 3-3 Precautions using the MicroSD Card The SD card can break if you frequently slide in/out or put or excessively put too much force. I f the card is removed while being used or being turned off, the data can be lost or malfunction. lease back up important data. We are not P responsible for the lost data. If the memory card does not slide out, do not remove by force. After removing the card at the repair center, exchange your device or get a refund.
BIP-1500 $IBSHJOH XJUI $SBEMF As you see in the picture, connect the adapter with the power cable to charge the PDA. Power Charging Light Charging Orange Charged Green hen the device’s battery is low, it may W warn you with a ring and a message. he charging time can vary depending on T the environment. A new battery is only partially charged. Please charge fully before using.
/HDUQLQJ %DVLFV 5VSOJOH 0O Power Button The [Power] button in on the front. To turn your device on you must press the shortly. You must hold down the button more than 3 seconds to turn on/off the LCD back light. After purchasing your device or hard reseting, the booting process can take some time. We apologize for the inconvenience. 20 BIP-1500 Manual 4PGU 3FTFU Reset Button To reset, press the [Reset] button, in front of the device, lightly with the stylus pen.
BIP-1500 )BSE 3FTFU lease use this function when your device P does not react to the soft reset. It will go back to the factory state. Reset Button When doing the hard reset, everything will be erased. Please do it at your own risk. We are not responsible for any information being erased. Before you hard reset, please back up your data. OK Button Hold [OK] button + [Reset] button for 5 seconds.
/HDUQLQJ %DVLFV 6TJOH UIF TUZMVT 1FO The supplied stylus pen is used to run programs or inputting on the touch screen. Pressing Pressing means to open, run, and cancel any items. Pulling Using the stylus pen you can select multiple items as much as needed. (it is similar to the mouse drag on the PC) Holding Down If you want to see further details of the selected item, hold down on the item and a popup will appear.
&RQQHFWLQJ $FWLYH6\QF BIP-1500 *OTUBMMJOH PO 1$ [Microsoft ActiveSync 4.5] Korean version. he functions and the layout and be different for T other manuals. 1 After connecting to the Microsoft homepage, download and install [Microsoft ActiveSync]. [Microsoft ActiveSync] can be updated through the Microsoft Homepage. [Windows Vista] users need to install [Windows Mobile Device Center].
&RQQHFWLQJ $FWLYH6\QF 2 On the window [Please read the license terms] press Ķ [Client information] window - input Ķ Please specify where you want to install. 3 When ready to install [Microsoft ActiveSync] will install. 4 [Microsoft ActiveSync] is installed.
BIP-1500 6TJOH "DUJWF4ZOD he display you see is a [Windows Mobile] version T and it can vary depending on the version. 1 You can connect with the Cradle. [ Microsoft ActiveSync] can be used when the device is plugged into a notebook or pc. You can transfer files by syncing it. You can also install/uninstall new programs. he USB cable is sold separately. Please contact the T service center for more details.
&RQQHFWLQJ $FWLYH6\QF ※ You can connect by an option accessory Snap-on. 26 BIP-1500 Manual 2 If the device and the computer successfully connects, [Microsoft Activesync] will automatically start. Please Select the button.
BIP-1500 3 In the folder, you can check the photos, music, and documents stored in the device and move it to the computer. [Precautions using ActiveSync] When "unknown USB device" can pop up, when the device is turning on while connected to the . If you reconnect the device from the the ActiveSync will run properly. If in ActiveSync, the state "connecting…" is continued for a long period of time, disconnect the device from the .
&RQQHFWLQJ $FWLYH6\QF If you have reconnected several times and still “unknown USB device” pops up In certain cases the computer’s USB host has gone wrong leading to connection failure. Remove the device from the and reboot the computer. Reconnect the device to the cable and it will run properly. The device not running after removing the battery while device on. For this to be avoided, do not remove the battery while the device on.
BIP-1500 $POOFDUJOH "DUJWF4ZOD Start Ķ Setting Ķ Connect Ķ USB-PC connect If you select [Advanced Network Function Use] you can connect various Surrounding USB devices to your PDA device. If you use the function [USB-PC Connect] your device’s battery consumption will be high. If you are not using the function [USB-PC Connect] disconnect to save your battery consumption. Your device and the surrounding devices can you used when connected with the .
8VLQJ 7KH %DUFRGH 5HDGHU 6TJOH UIF #BSDPEFT 4DBOOJOH #BSDPEFT Press the [Barcode Scan] button on the side or front of the device to start scanning barcodes. In order to scan accurately, you must scan with the correct angle 10cm away. Correct scanning Angle If you are using Barcodes with special programs, please contact the manufacturing company.
BIP-1500 $IFDLJOH #BSDPEFT Start Ķ Memo The barcode’s information will appear if you press the [Create New] button in . If you scan a barcode while is open, the barcode will be automatically saved in . If you scan when is not opened, it will not be saved. To do this, press the [Menu] button in [Create New] and [Paste] to save.
*HWWLQJ 7R .QRZ
BIP-1500 "EKVTUJOH 7PMVNF You can adjust your volume for program folders, selecting menus, or In-call volume. $IFDLJOH #BUUFSZ -FWFM You can check your battery level by pressing the on the top right of your display. After selecting the on the top right, you can adjust your system/ ring tone volume. Selecting Vibrate will make your phone muted and into the Vibrate Mode.
,QSXWWLQJ 7H[W 4FMFDUJOH UFYU JOQVU NPEF #MPDL SFDPHOJ[FS There are five different character input methods available. This input method uses the traditional writing area box split in the middle. The left side is used to write letters and the right side is for number entry. Symbols and common functions are located in other smaller boxes located in the right of the writing box area.
BIP-1500 ,FZCPBSE -FUUFS SFDPHOJ[FS This input method displays an on-screen keyboard that can be used to input characters by tapping the screen using the stylus pen. This option allows you to enter text using your own handwriting. The screen is divided into three different areas. A capital letter area, small letter area, and a number area. Characters are entered by printing letters in each area. The character is then analyzed and typed on the screen automatically.
,QSXWWLQJ 7H[W 5SBOTDSJCFS The transcriber option is similar to the letter recognizer, except instead of entering characters into a designated area, you can enter entire words and sentences using your own handwriting. Transcriber supports both printing and cursive writing styles and then automatically types the information on the screen.
3KRQH BIP-1500 .BLJOH B $BMM To make a call, press the [Phone] button in the bottom of the screen. Input a phone number and press [Call]. Redial Without inputting the a phone number again, press the [Call] button to redial. : Deletes mistake numbers. : You can use the saved speed dials to make a call. To add/edit/delete a speed dial, press the menu on the bottom right. (You can save a maximum of 98 speed dials.) : You can the recent view received calls/out going calls/missed calls.
3KRQH 3FDFJWJOH B $BMM When you are receiving a call, press the [Call] button or the [Answer] button on the bottom of the screen. #MPDLJOH B DBMM To block a call, press the [Ignore] button on the bottom of the screen or the [End] button on the keyboard. You can also block the call by shorting pressing the volume button. ö The outgoing information message can be different from the regular devices.
BIP-1500 )BOHJOH VQ To hang up, press the [End] button or the [End] button on the device’s keyboard. he BIP-1500 Does not support conference T calls, call transferring optional call services. he BIP-1500 Does not support Voice Call T during Dial-up. he BIP-1500 supports only the regular T optional call service . (The SMS service from call waiting is not supported.
&RQWDFWV 4FBSDIJOH 40 BIP-1500 Manual "EEJOH B $POUBDU 1 Start Ķ Select Contacts. 1 Select the [Create New] button on the top left. 2 Type in a name on the [Name Input] to search a contact. 2 Select the contact’s category.
BIP-1500 You can use various menus when you hold down the contact. Call Work/Home/Cell phone : Each numbers saved can be called. If the BIP-1500 device has been reset, there will not be a information message when retrieving/deleting a contact list. The BIP-1500 device may take some time showing the saved contacts when it has been reset or has been erased from the USIM card. Send Email : Sends email to the saved email account. Send Message : Sends a text message to the saved phone number.
&RQWDFWV .FOV 3 The contact will be saved when the attributes are imputed in order. Press [OK] to save in Contacts. Press and select the [Menu] button on the bottom right of the contacts screen. Edit : You can edit a saved contact. Send Contact : You can send a contact wirelessly. Contact copy/delete : You can copy/delete a selected contact. Option : You can do the setup of and .
&DPHUD BIP-1500 5BLJOH 1IPUPT Start Ķ Camera Video : Switches to Video mode. Mode : You can set it up as normal/bust/timer. Resolution : You can set various resolutions of 480x640 / 600x800 / 768x1024 / 1536x2048. Your photo will be taken when you press the [OK] button. The photo/video will be automatically saved in the album. Flash : You can turn on/off your flash. Full-Screen : You can change your display to full screen. Option : You can change the name/storing location/file size.
&DPHUD 7JFXJOH 1IPUPT You can do the following options : Delete / Send / Wireless-transfer / Set up as background / Enlarge / Edit / Properties with the photo / Video. I f the battery is too low, the camera will turn off or will not open. I f not in use more than a minute, it will go into sleep mode. the device can shoot video, the user If manual will vary depending on the camera program.
BIP-1500 The selected Photo/Video can be Enlarged / Reduced / Viewed with as a slideshow/set as a background / Wireless-transfer / Save / Edit /Properties.
6HWWLQJV #MVFUPPUI Setup for the communication of Bluetooth equipment. Search surrounding Bluetooth devices and pair (connect). Start Ķ Settings Ķ Bluetooth Turning on Bluetooth Set up as on/off. (If not in use, it will drain your battery.) Way to set up your Bluetooth Making your device discoverable Other devices and search and discover your BIP-1500 device. 46 BIP-1500 Manual 1 Press [Search for devices] to search other Bluetooth devices. 2 Select a Bluetooth device and press [Next].
BIP-1500 -PDL 3 Type in the password to connect with the selected device and press [Next]. (The password will be different for every device. Please refer to manual) 4 Check if you are connecting to the right device. It correct, press [Finish]. 5 If the model name and icon of the device you have chose appears, you are finished connecting. Password Set up a password for your device every time you turn it on. Start Ķ Settings Ķ Lock You must input your password twice.
6HWWLQJV 48 If the [Check if the device is not used for the following time] is set up, the screen below will show when turning on your device. Hint Type in a phrase in which will help you to remember your password. After inputting your password, press the [Unlock] button on the bottom of the screen. If you get the password wrong 4 times in a row, a [Hint] window will appear.
BIP-1500 4PVOE BOE /PUJGJDBUJPOT Sound You can set up your event, program, screen pressing, hardware button notification sounds. Notifications You can set the Notifications sounds when the (sound and notification) is set up. Start Ķ Settings Ķ Sound and Notifications. Start Ķ Settings Ķ Sound and Notifications Ķ Notifications If you check each item the (sound and notification) will be setup with a sound.
6HWWLQJV )PNF Background Display You can set up your photos as the home screen background. Start Ķ Settings Ķ Home 1 After selecting [Use this as background] press the [Find] button. 2 Select the folder that has the photo you want to use in [Folder]. 3 Select your photo. 4 After selecting you photo press [OK]. 50 BIP-1500 Manual Items You can set up items to be displayed on your home screen. Start Ķ Settings Ķ Home Ķ Items When you check the item it will be shown on your home screen.
BIP-1500 6TFS *OGPSNBUJPO You can set up a memo or your personal information. Start Ķ Settings Ķ Personal Ķ User Information You can set your name, company name, address, phone number, email address, and memo to be shown when your device turns on. 1IPOF Phone You can adjust/turn off the devices sounds. Start Ķ Settings Ķ Personal Ķ Phone Ring/Vibration : You can set as Ring / Ring(getting louder) / Ring only once / vibrate / Ring and vibrate / Ring after Vibrate / None.
6HWWLQJV %JTQMBZ -JHIU Battery power / Exterior power To save battery, you can set the battery power and exterior power to be turned off automatically. Start Ķ Settings Ķ System Ķ Display Light The shorter you adjust your display time, the longer your battery will last. You can turn the light back on again by press the buttons of the display. 52 BIP-1500 Manual Brightness Use the slider bar to adjust the brightness.
BIP-1500 &YUFSOBM (14 Program Select the port you want to use by receiving data from the program’s external GPS. ( 4FOTPS You can set up the usage for the G-Sensor. Start Ķ Settings Ķ System Ķ G-Sensor Start Ķ Settings Ķ System Ķ External GPS All the programs using GPS can communicate with this port. Hardware You can designate the hardware port in which GPS devices will connect to. Access If you select [Automatic GPS management] you can receive multiple program’s GPS data simultaneously.
6HWWLQJV .FNPSZ 6OJOTUBMMJOH 1SPHSBNT The memory’s current state (Usage, Available space) will be displayed. Start Ķ Settings Ķ System Ķ Memory Start Ķ Settings Ķ System Ķ Uninstall Program Main memory You can check the memory for Total/Usage/Available space of storage and programs. Select the program you want to uninstall on the list. Press [Uninstall] and it will automatically be removed. Storage Card You can check the usage/available space of the Micro SD memory card and the program store.
BIP-1500 %JTQMBZ 1SPHSBN .POJUPS General You can change the screen vertically, horizontally (right hand), horizontally (left hand) Start Ķ Settings Ķ System Ķ Display You can readjust the stylus pen points by pressing the [Display Adjust] button. The memory status of running programs will be displayed Start Ķ Settings Ķ System Ķ Program Monitor Using the menu you can select the running programs and to stop it. You can also stop all the programs running at once.
6HWWLQJV 64# 1$ $POOFDUJPO You can connect with a PC. BIP-1500 Manual Setting up the wireless internet with Wi-Fi. Start Ķ Settings Ķ Connections Ķ USB-PC connection Start Ķ Settings Ķ System Ķ Wi-Fi The computer uses a tunneling VPS can connect with your device with RNDIS. In this case, try to connect un-checking the [Advanced Network Function]. Through the wireless internet settings, you can set up the Wi-Fi that connects the surrounding AP (access point).
BIP-1500 46..*5 Setting up Wireless Internet 3 Select the [Profile] buttons on the bottom. 1 S elect the [Admin Login] button on the top right. 2 Type in SUMMIT(Capitalized) in the password box and press [OK] button. 4 Select the [Scan] button on the top right.
6HWWLQJV 5 A list of AP your device can connect to will appear. Connect to ex.) Platform_AP2. (Please select a desired AP) When the popup appears, Press [YES]. 6 Type password in the box of the AP you wish to connect and press [OK] buttons. 58 BIP-1500 Manual 7 Once you press [Commit], you will be connected to the internet.
'HYLFH 6SHFLILFDWLRQV Item 8$%." Features TJOHMF CBOE .)[ 6.54 )4%1" $16 .BSWFMM 19" .)[ 04 8JOEPXT .PCJMF .FNPSZ 3". .# 30. .# %JTQMBZ ” 27(" Y 5PVDI 8JOEPX ” 7(" Y 5PVDI 8JOEPX 0QUJPOBM 8-"/ *&&& C H *&&& B C H 0QUJPOBM #MVFUPPUI #MVFUPPUI 7 &%3 $MBTT (14 $BNFSB " (14 TVQQPSU 4J3' *OTUBOU'JYɇ . "' -&% 'MBTI 4MPU .
9DOXH 3DFN 'HWDLOV 1*/1"% 1-1. Parts of the pack LED to check the state of the pack.
BIP-1500 1-2. Paying with card 1-2-1. Paying with MSR 1-2-2. Paying with IC Card The card can be swiped in both directions. Please swipe the card fluidly. Insert with the card with the IC chip going in first. Please make sure to insert the card all the way.
9DOXH 3DFN 'HWDLOV 1-3. Installing/Removing the PINPAD 62 1-2-3. Paying with RFID 1-3-1. Installing the PINPAD Make sure you place the card on the RFID antenna. Install the PINPAD in the direction of the arrows.
BIP-1500 1-3-2. Removing the PINPAD To remove, press the [PINPAD remove button] to slide the PINPAD out in the arrow direction.
9DOXH 3DFN 'HWDLOV 'JOHFS 4DBO 2-1.
BIP-1500 2-2. Paying with card 2-2-1. Paying with MSR 2-2-2. Paying with IC card The card can be swiped in both directions. Please swipe the card fluidly. Insert with the card with the IC chip going in first. Please make sure to insert the card all the way.
9DOXH 3DFN 'HWDLOV 2-3. Using the Finger scan 2-4. Installing/Removing the Finger scan 2-4-1. Installing the Finger scan Your device will start scanning once you have placed your finger on the Finger scan. 66 BIP-1500 Manual Install the Finger scan in the arrow direction.
BIP-1500 2-4-2. Removing the Finger scan To remove, press the Finger scan remove button and slide it downwards.
9DOXH 3DFN 'HWDLOV 1BZNFOU 3-1.
BIP-1500 3-2. Paying with card 3-2-1. Paying with MSR 3-2-2. Paying with IC card The card can be swiped in both directions. Please swipe the card fluidly. Insert with the card with the IC chip going in first. Please make sure to insert the card all the way.
9DOXH 3DFN 'HWDLOV 1-3. Installing/Removing the payment equipment 70 1-3-1. Installing the payment equipment 1-3-2. Removing the Payment equipment Install the payment equipment in the arrow direction. To remove, press the remove button and slide it downwards.
BIP-1500 4OBQ PO 4-1.
9DOXH 3DFN 'HWDLOV 4-2. Installing/Removing Snap on 72 4-2-1. Installing Snap on 4-2-1. Removing Snap on Slide the snap on in the arrow direction to install. Press the remove buttons and slide it downwards to remove.
9DOXH 3DFN BIP-1500 $POOFDUJOH UIF IBOE TUSBQ Connect the hand-strap on the battery cover’s hand-strap holder.
9DOXH 3DFN $POOFDUJOH UIF 4IPVMEFS 4USBQ Connect the shoulder strap on both sides of the device’s Shoulder strap holder.
BIP-1500 $POOFDUJOH UIF *$ $BSE DPWFS Install the IC card cover in the PINPAD/ Payment equipment / Finger scan/ IC card slot. Connect the IC card cover strap on the shoulder strap holder.
4 $ Q A Water went into my device. What do I do? Q A It won’t turn on. Q A It won’t charge. First, remove your battery from the device and dry them in a dry place. After drying for a period of time try turning it on. If it still does not turn on, the main-board or other parts needs to be replaced. Please refer to your service center. The program may be damaged. Please try resetting your device. If it still doesn’t work, refer to your service center.
6HUYLFH &HQWHU Before Requesting After-Sales Service Before asking for after-sales service, please back up the data from the terminal. We do not back up data from the products received in the Customer Care Center. Therefore, we assume no responsibility for loss/deletion of data. Bluebird Soft Customer Service FAX : +82-2-548-0870 E-Mail : gcs@bluebird.co.kr Address : 1242, Gaepo-dong, Gangnam-gu, Seoul, Korea Operating hours Mon.-Fri. : 9:30 A.M. ~ 6:30 P.M.
6HUYLFH &HQWHU Charged Service 1. If it is not a default, it will be charged when requesting for after-sales service. - Service request due to inappropriate use of the customer - Loss of a PIN number - Use of programs that might effect the program (over-clock, forceful changes in the input of the system, personal developments) 2.
:DUUDQW\ &HUWLILFDWH BIP-1500 Thank you for purchasing a product from Bluebird Soft Inc. If a circumstance arises where you lose a receipt or the certificate of guarantee, then the term of guarantee will be calculated 3 months (certified by the number of the manufacture, a certificate of inspection) after the date of manufacture.
:DUUDQW\ &HUWLILFDWH Warranty 1. Bluebird Soft Inc. (hereinafter referred to as Bluebird) provides the warranty service for its products in compliance with the regulations on compensation for damage of customer. 2. Upon receiving a notification on a defect of its product within the range of warranty during the warranty period, Bluebird will repair or replace the defective product according to its warranty policy. 3.
Customers Service Center Hours Mon.- Fri. : 9:30 A.M. ~ 6:30 P.M. (GMT Time: +9 Hours) We are not open on Saturday, Sundays and National Holidays. Address : 1242 Gaepo-dong, Gangnam-gu, Seoul, Korea Bluebird constantly strives to bring utmost satisfaction to all our customers. #. 4FSJFT .
