BIP-1300 Series User Manual (for Bluebird Soft Inc. Windows Mobile) BluebirdSoft Inc. 558-5, Shinsa-Dong, Kangnam-Gu, Seoul, Korea A/S Center: 1588-1380 Website : www.mypidion.com - Please read “Warning and Caution” before use. BIP-1300 Copyrightⓒ 2006 Bluebird Soft, Inc. All Rights Reserved.
WARNING AND CAUTION • Do not operate the PDA phone near any credit card, phone card, account book, ticket in order to avoid magnetic interference. It may cause damage to • Use only the approved accessories and components provided by Bluebird Soft Inc. to insure user safety. • Never reconstruct, disassemble, or repair the product arbitrarily. Always contact a service center authorized by Bluebird Soft Inc. • If PDA or battery is wet, please do not attempt to data in the PDA phone.
CONTENTS Ⅰ. Get to Know BIP-1300 1. Terminal and Accessories 2. Component Names 7. Initialize with Soft Reset 8. Format Memory with Hard Reset Ⅲ. Functions 3. Buttons 1. Barcode Scanner 4. Function Keys 2. IrDA 5. Attach/Detach Battery 3. Bluetooth 6. Charge Battery 4. Wireless LAN 7. Battery 8. Specifications Ⅳ. ActiveSync 1. Install ActiveSync Ⅱ. Get familiar with the basic functions 2. Download Files 1. Power On/Off 2. Stylus Pen Ⅴ. APPENDIX 3. Get Started 1.
Ⅰ. Get to know BIP-1300 1. Terminal and Accessories Thank you for purchasing PIDION. Please check if all components are included. [Terminal] [Power Cable] [Cradle] [Battery] [AC Adapter] [USB Cable] [Stylus Pen] [Stylus Tether] ※ Picture or Image on the manual could be different from actual model. Please contact the regional manager for accessories or additional components. (Belt clip is not provided) BIP-1300 Copyrightⓒ 2006 Bluebird Soft, Inc. All Rights Reserved.
2. Component Names Please see below for each component. Printer Printing Outlet Magnetic Card Reader Data Synch or Charge light CDMA light Charging connection LCD Key Pad Cradle connection [Front] BIP-1300 [Bottom] Copyrightⓒ 2006 Bluebird Soft, Inc. All Rights Reserved.
Printing paper check Speaker Window Printing paper door USB Host Ear Jack Barcode or Camera button IC Card Reader Barcode button SD Slot Reset IrDA [Right] BIP-1300 [Left] Copyrightⓒ 2006 Bluebird Soft, Inc. All Rights Reserved.
Barcode Scanner Camera, Flash Hand Strap Battery door [Back] BIP-1300 [Back] Copyrightⓒ 2006 Bluebird Soft, Inc. All Rights Reserved.
3. Buttons Phone Activate phone program and connect phone. Clear Delete the character from right side to left. Alpha Change the character mode to numeral, upper case, lower case or symbols. Hang up Terminate the program in use. Turn on/off the PDA power. Front Buttons Turn on/off the PDA power. Power Button LCD Back Light on/off could be carried out when push the button longer than 3 second. Move the menu up or left side. Direction Key Move the menu down or right side.
4. Function Keys Combination of + Opens “Start Program.” (Same as the “Start” on the Window of PC.) + Starts the Key Board Input Method. + Starts the Symbol Input Method. + Gradually lights up the LCD. + Starts Refresh Function. (Same as F5 of PC.) + Gradually dim the LCD. + Page Down. + Changes to an Active Program. (Same as “Alt+Tab” of PC.) + Page Up. + Starts the Stylus Pen Adjustment Program. + Scroll Up. + Scroll Down.
5. Attach and Detach Battery [Batter Attached] [Battery Detached] ▪ Detach the battery door with pushing the above button ▪ Detach the battery with lifting the battery upside ▪ Push the lower part of battery after adjusting the battery to the battery slot ▪ Place the battery door from upside. BIP-1300 ※ Power must be turned off before removing the battery. Sudden electricity cut may cause the trouble. Sudden power off may be a cause of failure and may lose data. Copyrightⓒ 2006 Bluebird Soft, Inc.
6. Charge the battery [Charge with the cradle] ▪ As shown in the left, connect the adapter to the right side of the cradle on the back. ▪ When you insert PDA to cradle, push it untill clicking sound comes out. ▪ For extra battery charge, insert extra battery to extra battery place on cradle until you hear the clicking sound. ※ The product may not have been charged at the time of purchase. It is recommended to charge the battery for more than 48 hours prior to the first use of device.
[Charge with adapter] ▪ 24 pin to DC jack converter PDA will be required to be connected to adapter. ※ 24pin to DC jack converter can be purchased separately. ▪ As shown in the left, please make sure that converter’s connector is in the right direction. Push the both side buttons and insert it into the terminal’s connecting port ▪ After charging, please remove the connector from the terminal. ※ Use the adapter which is provided by Bluebird soft Inc.
7. Battery ▪ When PDA and extra battery are in the cradle at the same time, PDA will be charged at first, and then extra battery start to charge.
8. Specifications CPU Intel PXA270 520MHz OS Windows Mobile 5.0, Win CE 5.0 Memory RAM: 128MB, ROM: 128MB Display 3.5” 260,000 Color 240x320pixel Communication CDMA 1X or EVDO & WLAN(802.11b/g), GSM & WLAN(802.11b/g) Interface IrDA 1.
Communication Specification Index CDMA 1x Specification Frequency: Sending (824.64MHz ~ 848.37MHz), Receiving(869.64MHz ~ 893.37MHz) Antenna Power: 270mW or less Shift Keying: G7W Used the Certified Module (BCM-865) CDMA Evdo CDMA 1xEV-DO(IS-856) Forward: up to 2.4Mbps, Reverse: 153.6Kbps Dual Band : - Cellular : Sending (824.82MHz ~ 848.19MHz), Receiving(869.82MHz ~ 893.
Ⅱ. Get familiar with the basic functions 1. Power on/Off Power button ▪ Push the power button. ▪ While power is on, push the power button longer (About 3 Sec.) Then Back light will be turned off. . ▪ While Back Light is turn off, push the power button longer (About 3 Sec.) Then Back light is turned on. ▪ When Power is on or Back light is on, power is turned off if the power button is pushed. 2. Stylus Pen ▪ Using stylus to select, execute and move the items in the screen.
3. Getting Started [Windows Mobile screen] [Calibration] ▪ Using stylus to select, execute, move the item in screen ▪ The following figure is shown after the initialization wizard finished. Title Bar Today Screen ▪ Press the stylus to the targeted center target accurately, and doing the same when the target move to up left, down left, down right, up right (This is to settle the input value of stylus in LCD screen. BIP-1300 Copyrightⓒ 2006 Bluebird Soft, Inc. All Rights Reserved.
[Starting Windows Mobile] ▪ Click on the Start Button on the upper left corner of the title bar and the Start Menu appears. Start Button Start Menu Program Execution and Option Setting BIP-1300 Copyrightⓒ 2006 Bluebird Soft, Inc. All Rights Reserved.
4. Phone Calls (Send / Receive) [Send] 1) Push and make a start the phone program. 2) Enter the phone number. 3) Edit the phone number with 4) or . make you phone call. • Re-send function: Automatically make a phone call which is the last number you input 5) Connecting. • Talking time will show up on the screen. [Receive] 1) With ringing ‘Calling’ sign will be shown on the screen. 2) Push or and it will be connected.
5. Character input [Keyboard entry] ▪ Available for input character by Keyboard. ▪ Keyboard Language Converter Button ① Select the keyboard. ② Type in the character you want to enter ※ Use of “Shift” and “Ctrl” is the same as in PC keyboard. BIP-1300 Copyrightⓒ 2006 Bluebird Soft, Inc. All Rights Reserved.
[Character recognition] ▪ Available for input like writing. When you write the letter in the box, it will be automatically recognized. ▪ Block Recognizer ▪ Letter Recognizer Opening the Special Character Input Screen ① Select a Screen for Handwriting Recognition Input Method, Block Recognizer or Letter Recognizer. ② Select the character type and write the character in each window. ※ Write precisely ※ When you write the letter too slowly, letter recognition start before writing is done.
6. SD Memory Card SD card is ultra-mini Flash memory card, used for data storage and transfer. SD card slot ▪ Insert SD card: Push the SD memory card into the slot (shown in the photo) until it’s fitted. ▪ Remove SD card: Push the card with finger tip and the small bit of the memory card will come out, then pull it out. BIP-1300 Copyrightⓒ 2006 Bluebird Soft, Inc. All Rights Reserved.
7. Initialize with Soft Reset Press ‘Reset’ button with a stylus pen. System will be restarted, opened programs will be shut down and unsaved data will be lost. It’s the same as pressing reset button on a personal computer. ▪ Press ‘Reset’ button on the right side of the device using a stylus pen. ▪ PDA is restarted. ※ Soft reset can be used to restart the PDA when there is error occurred and PDA stopped working. 8.
Ⅲ. Functions 1. Barcode Scanner Please position the terminal to face the barcode and push right or left button depending on user setting. [Laser type Scanner] ▪ Barcode must be scanned in the same direction for proper reading. [Linear imager type Scanner] ▪ Barcode can be read in any direction. ▪ For PDF417, barcode must be scanned from up to bottom or vise versa. BIP-1300 Copyrightⓒ 2006 Bluebird Soft, Inc. All Rights Reserved.
Laser type Barcode and Linear imager type Barcode reading tests are basically the same. [Barcode Test] ① Executes the BarcodeApp Program. ② Go to Start Menu and executes starts Word Mobile of Program. ③ Open a new document. ④ Position the scanner to face the barcode and push the scanner button . ⑤ Captured barcode value is shown in the new notepad. ※ For the use of barcode scanner on a special barcode reading program, please contact the program provider. BIP-1300 Copyrightⓒ 2006 Bluebird Soft, Inc.
2. IrDA PDA can communicate with PC or other peripherals for file or program transfer without cradle or USB cable. IrDA port ▪ Face the 2 IrDA windows each other within 30cm. ▪ IrDA use ① Path: [Start] -> [Settings] ② Click on the [Connections] tab and select [Beam]. ③ Check ‘Receive all incoming beams’ and then click on [OK]. ④ Search for the opposite IrDA port ⑤ Press “OK” after sending the data ※ The faster transmission speed is, the shorter the distance is.
3. Bluetooth Activate the Bluetooth device such as Bluetooth printer and card reader. Allow you to communicate with Bluetooth devices. ▪ Example of Using the Bluetooth. ① Path: [Start] -> [Settings] ② Click on the [Connections] table and then Select [Bluetooth]. ③ Under the [Mode] tab, check ‘Turn on Bluetooth’ and click on [OK]. ▪ Turn on Bluetooth - Depending on checking the option, it is either In Use or Not in Use Status.
Other Bluetooth devices are scanned and paired. ▪ Example of Using the Bluetooth ① Path: [Start] -> [Settings] ② Click on the [Connections] table and then Select [Bluetooth] ③ Under the [Devices] tab, select ‘New Partnership... ※ When other Bluetooth devices are recognized, the model name of the product and an icon appears as shown in the Figure. ※ When nothing is recognized, an message to indicate that nothing was found appears. ▪ See if PIN Number entry window pops up.
4. How to Use Wireless Manager With the Comprehensive Wireless Manager Function, it assists to use Bluetooth and Wi-Fi (Wireless Lan) in an easy and simple way. ▪ Example of Using the Wireless Manager ① ② Path: [Start] -> [Setting] ② Click on the [Connections] table and then Select [Wireless Manager] ③ Select either ‘Wi-Fi’ or ‘Bluetooth’ button ※ Depending on the communication specification of the terminal, the Support Items for Wireless Manager can vary.
Ⅳ. ActiveSync 1. Install ActiveSync ▪ Download the installation file for ActiveSync from http://www.microsoft.com/korea, and run the setup.exe ▪ When the following window appears, click “Next”. ▪ When the following window appears, click “Install”. ※ This is for Microsoft ActiveSync 4.1 - Korean. In using other versions, the Menu selections and functions in the manual can be different. BIP-1300 Copyrightⓒ 2006 Bluebird Soft, Inc. All Rights Reserved.
▪ After installation is done, click “Finish”. ▪ Depending on your PC environment, the Wizard may ask you to restart your PC. In this case, restart your PC. ※ When you first connect BIP-1300 to PC, the New Hardware Search Wizard of the PC is activated. ※ If you have already installed Microsoft ActiveSync, you do not need to install an additional driver program. ※ During first installation, the terminal may not be able to connect to the PC.
2. Download Files ▪ In order to use ActiveSync, connect PDA to PC or Laptop by using the USB cable. ▪ Open file finder of your PC, and copy files you want. After all files are copied, move the files to PocketStore. Or, after fitting PDA in a cradle, connect the cradle to PC by using the USB cable. ▪ If PDA is turned on when connected to PC, PC will automatically detect it and execute ActiveSync. ▪ Press ActiveSync Search button and activate Mobile installation window.
Ⅴ. APPENDIX 1. Frequently Asked Questions. Q. I have dropped a terminal in water. A. Remove the battery immediately and dry it in the dry area. If the device still doesn’t work, main board or other components may be required to replace. Please contact service center. Q. It doesn’t boot. A. Program may have been damaged. Please attempt to rest reset. If it still doesn’t work, please contact the service station. Q. I can’t get it charged A.
2. Website and Authorized Service Station [Authorized stations] GLOBAL & KOREA BluebirdSoft Inc. Email: service@bluebird.co.kr SINGAPORE http://www.ark-technology.com Tel) 65-6741-3866 Fax) 65-6741-3066 TIWAN http:// www.arktech.com.tw/ Tel) 886-2-86471546 Fax)886-2-86473543 MALAYSIA ENT Quest Sdn. Bhd. Tel)603-2380-4744 Fax) 603-2380-4745 THAILAND ENT (Thailand) Company Limited Tel) 662 216 20404 BIP-1300 Fax) 662 216 2045 Copyrightⓒ 2006 Bluebird Soft, Inc. All Rights Reserved.
FCC COMPLIANCE STATEMENT: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. INFORMATION TO USER: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
transmitter. BIP-1300 Copyrightⓒ 2006 Bluebird Soft, Inc. All Rights Reserved.