User's Manual

Battery
Packing List
Printer Paper
1A Power Adapter
(3A optional)
Front
Feed Button
USB Port
Menu Key
Power Jack
MSR
Power
Button
Paper Cutter
Status LED
Cancel Key
Clear Key
Enter Key
Serial Port
Navigation
Key
Numeric Keypad
Battery
Cover
Back
Contact your distributor for replacement parts
Load Paper
Front
Printer
1. Open the lid.
2. Install paper roll with paper pointing up.
3. Pull out a small amount of paper, close lid.
Install Battery
1. Remove the battery cover.
2. Plug in the battery cable into the connector.
3. Install the battery into the slot and install the
battery cover.
Battery
Connector
Install SAM Card
1. Remove the battery cover and battery.
2. Open the card holder and insert the SAM card
with the electronic chip facing down and the
cut-out corner on top.
3. Close the card holder and lock it into
place.
4. Install the battery and the battery cover.
SAM Slot
Power & Charging
1. Insert the DC plug of power adapter* into
the power jack of printer.
2. Plug power adaptor into AC power outlet.
*Optional 3Amp power supply required when running without battery.
Power
Jack