USER MANUAL Model: Blackline PG1
IMPORTANT SAFETY INSTRUCTIONS 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14) 15) 16) 17) 18) Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer. Do not install near any heat sources such as radiators, heat registers, stoves, or other. Do not defeat the safety purpose of the polarized or grounding type plug.
What’s in the box Turntable Mat RCA to RCA with grounded cable 3
Components Features Please check thoroughly and make sure you find the following items that come 4
along with this package: 1) Unit 8) Instruction Manual 2) Power Adaptor 9) Cartridge Alignment Protractor 3) Counterweight 10) Anti-skating Weight 4) Platter with Belt 11) RCA to RCA grounded cable 5) 45 RPM Adaptor 12) EU+UK power adapter 6) Hook 7) Turntable mat Turntable Platter and Belt Setup 1. Install the drive belt over the inner ring under the platter. 2.
3. Lower the tonearm lift and position the cartridge in the space between tonearm rest and platter. Carefully rotate the Counterweight until the tonearm balances out. The tonearm should return to the balanced position if it is moved up or down. This adjustment must be done carefully. 4. Once the tonearm is correctly balanced return it to its rest. Hold the Counterweight without moving it, and gently rotate the Down force Scale ring until the zero is in line with black line on the rear of the tonearm.
input matches the type of cartridge being used. The factory installed cartridge is 47k ohms / MM-input. To connect a Blue Aura v40 amplifier to the turntable using Bluetooth, turn the v40 on and change the Source to BT (ensure BT antenna is connected to the back of the v40) Using the v40 remote control, press the BT button to put into pairing mode – fast flashing. Turn the PG1 turntable on and it automatically searches for any BT devices that are in search mode – flashing LED, rear of turntable.
which is connected to the mains power will switch to standby mode automatically if no music has been playing for about 20 minutes. Operation How to play a record 1. Connect the included power adapter to unit and press the power rocker switch to be “ON” position. 2. Remove the needle cover from the cartridge. 3. Place the slip mat on the platter and place a record on the slip mat. If using 45 RPM records, put the 45 RPM adapter on the center spindle before placing the record on the platter. 4.
4. To disconnect pairing, power off the turntable or turn off Bluetooth pairing on your Bluetooth speaker. Note: This unit will connect to the closest Bluetooth speaker it. If after 2 minutes no Bluetooth speaker can be found to pair with, the Bluetooth transmitter will become inactive and the LED will turn off. Cartridge Replacement 1. Before replacement, put the stylus protector back on the stylus to prevent damage to the stylus during the replacement process. 2.
NOTE: If you are unfamiliar or uncomfortable with completing this procedure, we recommend consulting with a professional to perform the installation. Maintenance and Cleaning Your turntable requires little of no regular maintenance. Remove dust with a slightly damp antistatic cloth. Never use a dry cloth, this will create static electricity and attract more dust! Antistatic cleaning agents are available at specialist stores, but must be applied sparingly to avoid damage to rubber parts.
- Amplifier or speakers muted. - No connection to the speakers. - No connection between turntable and amplifier. -Wire leads not connected the cartridge. Strong hum on phono input: - No ground connection from cartridge, arm, or arm cable to amplifier or ground loop. - Turntable too close to speakers. Distorted of inconsistent sound from one or both channels: - Turntable is connected to wrong input of amplifier. - Needle or cantilever damaged. - Drive belt overstretched or dirty.
Product technical Specification: Nominal Speeds 33 1/3 & 45RPM Speed Variance ±1.5% Wow and Flutter ≤0.15% Signal to Noise 55dB Down force Range 3.0-6.0g Effective Tonearm Length 8.6” (218.5mm) Overhang 0.73in Power Consumption 5W (Max.) Outboard Power Supply 12V/ 500mA AC-DC Dimensions (W x H x D) 420 x 360 x 125mm Net weight 4.8kgs Cartridge Specification: Model Number AT-3600L Frequency response 20Hz-20kHz Recommended load resistance 47kohms Channel balance ＜2.
