User Manual

BLT-HD
WIRELESS MUSIC RECEIVER
USER MANUAL
WELCOME
Congratulations on your purchase of the BluDento BLT-HD True Hi-Fi BT Music
Receiver. The following pages explain the features and operation of
the BLT-HD. Please take a few moments to read this user guide.
Also read all safety instructions before proceeding. The answers to most set
up and performance questions can be found in this guide. If you have any
further questions about the operation or use of this product, please contact our
customer care team for assistance on [e-mail]
OVERVIEW
Enjoy a limitless universe of high definition digital music through your existing
Hi-Fi audio system. BLT-HD streams the highest quality audio wirelessly from
your BT enabled device to any music system or powered speakers.
BLT-HD is a true high fidelity component that uses high-end Qualcomm
®
aptX
™
HD / AAC / SBC audio streaming codecs and audiophile grade DAC to unleash
all the clarity, crispness and full emotional impact your Hi-Fi stereo system can
deliver. Unlike standard BT receivers, BLT-HD provides ultimate wireless freedom
with the longest wireless range.
QUICK SETUP
Setup and pairing is really easy. The following instructions will help you connect
BLT-HD to your music system and pair with your tablet, computer or smartphone.
STEP 1: Connect audio cables from BLT-HD rear panel to your music system
audio input.
STEP 2: Connect a power adapter (excluded) to BLT-HD with the included power
supply cable and plug the power adapter (excluded) into an AC outlet.
BLT-HD will automatically go into pairing mode. The LED light will start
flashing to indicate the unit is now ready to be paired.
STEP 3: Turn ON BT on your device and go to BT preferences.
STEP 4: Scan listed BT devices and select “BLT-HD” to pair and connect. The
LED indicator should turn solid.
STEP 5: Make sure your Hi-Fi audio system is turned on and the proper input
source is selected.
STEP 6: The music on your smart device will now play through your Hi-Fi
audio system.
Disconnect BLT-HD from a paired device and put it back into pairing mode.
Repeat Steps 3 to 6 to add additional devices. BLT-HD can connect to TWO
smart devices at a time, but is capable of remembering up to 8 devices.
IN THE BOX
• BluDento BLT-HD
• 2RCA to 2RCA Stereo Audio Cable
• 3.5mm to 2RCA Stereo Audio adapter
• USB to micro USB Cable
• TOSLINK optical audio cable
• User Guide
Pairing LED
Understanding
the LED alerts:
Blue blinking: powered
and in pairing mode,
waiting to be paired
Solid blue light:
In connection
Power plug
USB 5V DC
(0.2A - 3.0A)
Stereo
Analog
Output
Toslink
Optical
Output
Coax
Audio
Output
Antenna
Rotates left,
right and up,
DO NOT
rotate down
NOT included:
• Coaxial audio cable
• Power plug USB 5V DC
(0.2A - 3.0A )
HOW TO PAIR TWO PHONES
1. Power on BluDento Bluetooth receiver
2. Enable Bluetooth on the 1st phone, search and connect to “BLT-HD”
3. After pairing successfully, disable Bluetooth on the 1st phone. BluDento will
enter pairing mode again.
4. Pair BluDento to the 2nd phone by the same way.
5. After pairing successfully, enable Bluetooth on the 1st phone, click to
connect “BLT-HD” again.
6. Now both 2 phones are connected to BluDento.
Note: Only 1 phone can play at a time, you have to pause the other.
SAFETY INSTRUCTIONS
Keep product dry to avoid affecting the interior circuitry of the product.
High temperature will shorten the life of electronic device.
Don’t expose to extreme temperatures, it may damage the internal
circuit board.
Don’t drop the product.
Don’t put the product in direct sunlight or place in hot areas.
Don’t use chemical or detergent to clean the product.
Don’t take the product apart or the warranty will be voided.
Using the product at excessive volumes may cause permanent hearing
damage. You can get the most out of your equipment and enjoy great
audio performance even at safe levels.
Due to isolating characteristic of the product, do not use the product at
excessive volume while driving or in any other activity where failure to hear
surrounding sounds could be dangerous.