Touch Book 7.
Contents 1 Safety Precautions .................................................. 3 2 Overview ................................................................. 4 3 Charging ................................................................. 4 4 Inserting a Memory Card ......................................... 5 5 Power on / Power off ............................................... 6 6 Android Home Screen Guides ................................. 7 7 Changing OSD Language & System Time...............
1 Safety Precautions Keep the device away from extreme heat, cold, moisture and dust. Do not spill any liquids on the device as it may damage the device or cause a fire. Do not use liquids and chemical cleaners for cleaning the device. Do not insert any objects into the device, or it may result in short circuit or it might damage the circuit.
2 Overview Front Camera Headphone Volume Button Power Button Rear Camera Micro USB Port Earphone Jack Micro SD Port SIM Card Port Speaker 4
3 Charging Plug the DC end of adapter to the power jack or USB port (if there is no power jack) of the device and plug the AC end to the wall socket for charging. Normally it takes approximately 5 hours to fully charge the device. Operating the device during charging with the AC adapter may extend the time of full charging. The adapter shall be installed near the equipment and shall be easily accessible. 4 Inserting a Memory Card The device supports micro SD/SDHC cards.
5 Power on / Power off 1) To turn on the device, press and hold the Power button until you see the start-up screen then release, it will automatically enter the Home screen. If it is the first time to use it, it will enter set-up guide menu. Please follow the on-screen instructions. 2) Press the Power button once to enter sleep mode and press it again to open the device. 3) Press and hold the Power button, and then tap on OK to power off the device.
6 Android Home Screen Guides Status Bar: Slide down to see more. Status Bar: Slide down to open quick settings menu. Web Information search Shortcuts: touch open; touch&hold move. to to : tap to enter Home screen. : tap to return to the previous page. : tap to open recent APPs list menu. : tap to enter APPs Menu.
the tablet's features. The Home screen can have multiple panels. To view other panels, slide left or right. Add an app icon to home screen On the Home screen, tap to open APPs list menu, tap and hold an application icon, and then drag it into a panel preview. Set wallpaper Tap and hold the blank area on the Home screen. Tap WALLPAPERS and select one of the following: Black Hole, Bubbles, Holo Spiral, Magic Smoke ,Nexus, Phase Beam, Spectrum, Water, Vedio Wallpaper. Select an image and tap SET WALLPAPER.
Select Settings---Date & time to change system time. 8 Connecting to Wi-Fi On the home screen tap and select Settings icon to access the list of options. Select Wi-Fi. If the Wi-Fi is off, tap on the Wi-Fi line to turn it on. The device will scan for available Wi-Fi networks and display them on the screen. Tap on the network you want to connect to. Then tap on the wireless password field to enter the required network information and tap on Enter---Connect.
Transferring Contents from PC Connect the device to your PC/Notebook via USB cable. Select the contents you want to transfer from your PC/Notebook. Drag the contents from the PC/Notebook to the device. Please do not disconnect the USB cable during loading. It may cause malfunction of the device and files.Left click on to disconnect the device from PC/Notebook safely. 11 Troubleshooting Q1: What if water enters the device? A: 1) DO NOT turn on the device.
If the power is low, connect the adapter to charge. Remove the micro-SD card and any other external device. Q3: How to restore the factory default settings? A:Go to Settings---Backup & reset---Factory data reset to recover the system to the default status. Q4: How to prolong the usage time of the battery? A: Adjust the brightness of the touch screen to proper level on Settings---Display---Brightness menu. Turn down the volume. Set the sleep time to proper level on Settings--Display---Sleep menu.
FCC Regulations This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
frequency (RF) energy set by the Federal Communications Commission of the United States. During SAR testing, this device was set to transmit at its highest certified power level in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation of 0 mm.
Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. The FCC has granted an Equipment Authorization for this model device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model device is on file with the FCC and can be found under the Display Grant section of www.fcc.