speeCup Product Information Guide
Specifications IMPORTANT Frequency Range: 2.402GHz - 2.480GHz Channels: 79 Carrier Power: <2.5mW Modulation: GFSK Frequency Stability: +-75KHz Standby Time: 336Hours Charging Time: 5Hours Power Supply: 5V, 500mA Ambient Temperature: 0℃ ~ 45℃ Humidity: 0%~90% Size(mm): 209*85 To get the full capability of your new speeCup, please read this manual.
CHARGING ADJUSTING VOLUME speeCup has a built-in Li-ion battery (3.7V, 1.6A), so it can be used without connecting to a power supply. To charge the battery, follow these steps: To adjust speeCup’s volume, rotate the smartControl clockwise to increase the volume or counter-clockwise to decrease it. 1. Connect the micro USB connector to the speeCup DC 5V input. 2. Plug the USB full-size connector into the 12V accessory car plug supplied. 3. A common USB type AC charger (DC 5V, 500mA) can be used as well.
STEREO AUDIO OUTPUT TO HOME SYSTEM Connecting speeCup to a home audio system will provide a useful way to hold your Bluetooth connected smartphone or tablet in your hand and let speeCup act as an interface to your sound system. SMARTCONTROL INTERFACE Top view Smartphone Voice Command access Bottom view smartControl perimeter interface Though each audio system is a little different, speeCup’s 3.
OPERATION AUDIO OUT Turning speeCup On or Off speeCup can also be connected to other audio devices like your car audio system, home audio system or sound bar using the 3.5mm audio out cord provided. The ON/OFF switch is located and clearly marked on the bottom of the speeCup. The standby time of speeCup is 336 Hours, you had better not to slide the switch to OFF position if it is unnecessary.
GESTURE 1. When a call is received, wave left or right in the direction of the gray arrows to answer it. For details, see the picture below. 2. To end a call, wave left or right again. 3. While playing music, wave left or right to select the desired track. The distance between your hand and the speeCup should be less than 2.4 inches (6cm). By default the feature is switched off. To switch it on, press and hold for several seconds until you hear a confirmation beep .
Clear speeCup from iPhone USING VOICE COMMAND FUNCTIONS Touch the small blue arrow as below, then you will see Forget this Device, touch this option and confirm by the red prompt. Voice commands with Siri or S Voice OFF Simple voice commands of numbers or contact names can be given to speeCup by pressing the once briefly in the center of speeCup and wait to hear the sound indicating voice command is ready to access.
Clear speeCup from iPhone USING VOICE COMMAND FUNCTIONS Touch the small blue arrow as below, then you will see Forget this Device, touch this option and confirm by the red prompt. Voice commands with Siri or S Voice OFF Simple voice commands of numbers or contact names can be given to speeCup by pressing the once briefly in the center of speeCup and wait to hear the sound indicating voice command is ready to access.
GESTURE 1. When a call is received, wave left or right in the direction of the gray arrows to answer it. For details, see the picture below. 2. To end a call, wave left or right again. 3. While playing music, wave left or right to select the desired track. The distance between your hand and the speeCup should be less than 2.4 inches (6cm). By default the feature is switched off. To switch it on, press and hold for several seconds until you hear a confirmation beep .
OPERATION AUDIO OUT Turning speeCup On or Off speeCup can also be connected to other audio devices like your car audio system, home audio system or sound bar using the 3.5mm audio out cord provided. The ON/OFF switch is located and clearly marked on the bottom of the speeCup. The standby time of speeCup is 336 Hours, you had better not to slide the switch to OFF position if it is unnecessary.
STEREO AUDIO OUTPUT TO HOME SYSTEM Connecting speeCup to a home audio system will provide a useful way to hold your Bluetooth connected smartphone or tablet in your hand and let speeCup act as an interface to your sound system. SMARTCONTROL INTERFACE Top view Smartphone Voice Command access Bottom view smartControl perimeter interface Though each audio system is a little different, speeCup’s 3.
CHARGING ADJUSTING VOLUME speeCup has a built-in Li-ion battery (3.7V, 1.6A), so it can be used without connecting to a power supply. To charge the battery, follow these steps: To adjust speeCup’s volume, rotate the smartControl clockwise to increase the volume or counter-clockwise to decrease it. 1. Connect the micro USB connector to the speeCup DC 5V input. 2. Plug the USB full-size connector into the 12V accessory car plug supplied. 3. A common USB type AC charger (DC 5V, 500mA) can be used as well.
Specifications IMPORTANT Frequency Range: 2.402GHz - 2.480GHz Channels: 79 Carrier Power: <2.5mW Modulation: GFSK Frequency Stability: +-75KHz Standby Time: 336Hours Charging Time: 5Hours Power Supply: 5V, 500mA Ambient Temperature: 0℃ ~ 45℃ Humidity: 0%~90% Size(mm): 209*85 To get the full capability of your new speeCup, please read this manual.