Installation & Operation Instructions

ManualsBrandsBLP Technologies ManualsElectronicsPower Pack Enclosure

WIRELESS POWER PACK

LOAD CONTROLLER

INSTALLATION & OPERATION INSTRUCTIONS

CATALOG NUMBERS DESCRIPTIONS

SWX-950

POWER PACK LOAD CONTROLLER

SWX-950-D2

POWER PACK LOAD CONTROLLER W/ 0-10V

DIMMING

SWX-950-AX

POWER PACK LOAD CONTROLLER W/ AUXILIARY

LOW VOLTAGE CONTROL

SWX-950-AX-D2

POWER PACK LOAD CONTROLLER W/ 0-10V

DIMMING & AUXILIARY LOW VOLTAGE CONTROL

SWX-999

LOW VOLTAGE WIRING CHAMBER

SPECIFICATIONS

ELECTRICAL

OPERATING VOLTAGE

120/277 VAC,

Single Phase, 50/60 Hz

CLASS 2 OUTPUT RATINGS

18 VDC, 150 mA (-AX version)

RELAY CURRENT REQS

55 mA

LOAD RATINGS

20A @ 120 VAC -

General Purpose Plug Load

20A @ 120/277 VAC -

General Purpose, Tungsten, Magnetic

Ballast

16A @ 120/277 VAC -

Electronic Ballast, LED Driver

DC LOAD RATINGS

20A @ 28 VDC (MAX)

1A @ 5 VDC (MIN)

DIMMING LOAD

(Models with -D2 option only)

50mA, (0-10 VDC ballasts or drivers

compliant with IEC 60929 Annex E.2)

MOTOR LOAD

1 HP

ESD IMMUNITY

Tested to withstand electrostatic

discharge without damage or memory

loss

ENVIRONMENTAL

OPERATING TEMP

32°F to 122°F (0°C to 50°C)

RELATIVE HUMIDITY

0-95% Non-Condensing

Indoor Use Only

WIRELESS

RANGE

80’ line of site w/o obstruction

40’ with obstruction (walls/oors)

FREQUENCY

915 MHz ISM Band

WIRELESS LINKING

Simple 3 sec. Push Button Process

SECURITY

All Wireless Data is Encrypted

PHYSICAL

SIZE

3.00” H x 2.25” W x 1.88” D

(7.62 cm x 5.72 cm x 4.78 cm)

WEIGHT

6.00 oz.

COLOR

Blue

MOUNTING

1/2” Knockout

RELAY TEST BUTTON

LED STATUS INDICATOR

Bi-color White & Blue

OPERATION

OPERATING MODES

Occupancy & Vacancy

Partial On/Off (-D option)

TIME DELAY OPTIONS

1, 5, 10, 15, 20, 30 min.

CODE COMPLIANCE

These power packs can be used to

meet ASHRAE 90.1, IECC, & Title 24

energy code requirements

FEATURES

Ã Wirelessly Links to Sensors & Wall

Stations

Ã Pairs in Seconds up to 50 Remote

Devices

Ã Switches Up to 20A Line Voltage

Loads

Ã Electronically Timed Switching

Ensures Long Relay Life

Ã Integrated Test/Programming Button

Ã Conﬁgurable Time Delays and

Operational Modes (e.g. Occupancy/

Vacancy)

Ã Optional 0-10V Dimming Output for

Partial On & Partial Off Operation

Ã Optional Low Voltage Sensor & Wall

Station Wired Connectivity

Ã Plenum Rated (UL 2043)

OVERVIEW

SENSORWORX wireless power pack controllers switch on/off power to a connected lighting

load as directed by wirelessly linked sensors and wall controls. Additionally, the unit’s

0-10V dimming option enables dimming control. This wireless power pack also has optional

auxiliary low voltage connections for achieving hybrid wired/wireless architectures.

The SENSORWORX wireless power pack is rated to switch fully loaded circuits and utilizes

a powerful microprocessor to optimize its switching timing, ensuring long relay life even

when controlling high-inrush LED lighting. As with all SENSORWORX products, these power

packs are easy to install and incorporate features which reduce contractor labor time. An

elongated chase nipple with snaps for quick installation and an optional snap-on low voltage

wire chamber make for a hassle free contractor experience. All SENSORWORX products are

proudly made in the USA.

BASIC OPERATION

A received wireless message indicating occupancy from one or more wirelessly linked

sensors will trigger the pack’s integrated relay to close. When congured for Vacancy

operation, an ON switch message is required from a wirelessly linked wall station to initially

trigger lights. Once closed, line voltage will ow through the relay and turn on the connected

lighting load. The wireless power pack maintains a master time delay that is reset every

time a linked sensor reports occupancy. Lights will be switched off once there hasn’t been an

occupancy message reported for the duration of the time delay.

Summary of content (8 pages)

PAGE 1
WIRELESS POWER PACK LOAD CONTROLLER INSTALLATION & OPERATION INSTRUCTIONS CATALOG NUMBERS DESCRIPTIONS SWX-950 POWER PACK LOAD CONTROLLER SPECIFICATIONS SWX-950-D2 POWER PACK LOAD CONTROLLER W/ 0-10V DIMMING ELECTRICAL WIRELESS SWX-950-AX POWER PACK LOAD CONTROLLER W/ AUXILIARY LOW VOLTAGE CONTROL SWX-950-AX-D2 POWER PACK LOAD CONTROLLER W/ 0-10V DIMMING & AUXILIARY LOW VOLTAGE CONTROL OPERATING VOLTAGE 120/277 VAC, Single Phase, 50/60 Hz RANGE 80’ line of site w/o obstruction 40’ with obstru
PAGE 2
INSTALLATION INSTRUCTIONS MOUNTING INSTRUCTIONS POWER PACK Power Packs are designed to attach to electrical enclosures with 1/2” knockouts. Do not mount unit inside a metal junction box. LOW VOLTAGE WIRING CHAMBER [OPTIONAL] LOCK NUT WIRING CHAMBER * SNAP-ON COVER SNAPS DIRECTLY TO MAIN HOUSING INSTALLATION NOTES LED INDICATOR 1 For supply connections, use 14 AWG (90°C) or larger wires. Wire all circuits exiting chase nipple as Class 1 circuits. 2 Suitable for plenum use.
PAGE 3
MODEL #: SWX-950-AX-D2 120V CLASS 2 WHT OCCUPANCY OUTPUT RED +VDC INPUT BLK COMMON LOW VOLTAGE SENSOR (e.g.
PAGE 4
APPLICATIONS (CONT.) ADDITIONAL APPLICATION INFORMATION Ã For areas such as stairwells, the SWX-950-D2 unit can be used to achieve Partial Off operation where lighting is at the full bright level when occupied and dropped to the 50% (level is configurable) during unoccupied periods. Ã Partial On operation can be achieved by the SWX-950-D2 unit. In this configuration 0-10V lighting is turned on to a configurable Partial On Level when triggered from an occupancy sensor or switch.
PAGE 5
TESTING & TROUBLESHOOTING TESTING CONNECTED LIGHTING To test the unit’s control of connected lighting, press and release the push button (located next to LED) one time. Lights should toggle if the unit is operating and wired to lighting properly. LED BLINKOUT BEHAVIOURS LED BEHAVIOR DESCRIPTION Continuous WHITE blinking “heartbeat” Normal operation Repeating double BLUE flashing Power supply is overloaded. NOTES/REMEDY 1. Check for miswiring causing a short on the red low voltage wire. 2.
PAGE 6
CONFIGURATION SETTINGS (CONT.) FUNCTION #3: OPERATIONAL MODES Wireless power packs have several sequence of operation choices. SETTING # 2* MODE DESCRIPTION Automatic On Occupancy Mode DEFAULT SETTING Lights come on automatically when an occupancy signal is received from wirelessly linked sensors (and/or wired sensors on -AX models). On dimming models the lights will turn on to the TURN ON / PARTIAL ON LEVEL as specified in Function #4.
PAGE 7
CONFIGURATION SETTINGS (CONT.) DETAILED DIMMING CONFIGURATION Several dimming parameters (listed in the tables below) can be adjusted. A step-by-step programming procedure is listed below the tables. FUNCTION #4 TURN ON / PARTIAL ON LEVEL) The level the dimming output is set to upon initially turning on (requires unit be in a Partial On operating mode). FUNCTION #7 LOW TRIM The voltage to which the dimming output will drop when the unit is in the off state.
PAGE 8
CONFIGURATION SETTINGS (CONT.) DETAILED FUNCTION TABLES FOR HYBRID (-AX) MODELS FUNCTION #11: AUXILIARY INPUT WIRE MODE On hybrid power packs (i.e. -AX option models) the functionality of the brown low voltage input wire is configurable between the below functionality. SETTING # MODE DESCRIPTION 3 Switch Input (0.5 second maximum pulse) 4 Switch Input (1.0 second maximum pulse) 5 Switch Input (2.