Blizzard Lighting, LLC www.blizzardlighting.
TABLE OF CONTENTS The Puck Q6 Unplugged™ LED PAR Can 1 1. Getting Started 3 Lithium-Ion Battery Warnings & Information What’s In The Box? Getting It Out Of The Box Powering Up! Getting A Hold Of Us Safety Instructions (Don’t Stick Your Hand In The Toaster!) 3 4 4 4 4 5 2. Meet The Puck Q6 Unplugged™ LED PAR Can 6 Features DMX Quick Reference (4 and 7-Channel Modes) The Puck Q6 Unplugged™ Pin-up Picture 6 6 7 3.
LITHIUM-ION BATTERY WARNINGS & INFO 1. CAUTION! TO REDUCE THE RISK OF INJURY AND/OR EQUIPMENT DAMAGE, DO NOT TAMPER WITH THE CHARGING CIRCUITRY IN THIS FIXTURE. The use of other types of chargers may result in personal injury or equipment damage. Under no circumstances attempt to connect the battery pack to any power supplies or other equipment that is not specifically and expressly designated for use with this model battery pack. 2.
1.
SAFETY INSTRUCTIONS • Please keep this User Guide for future use. If you sell the unit to someone else, be sure that they also receive this User Guide. • ALWAYS make sure that you are connecting to the proper voltage, and that the line voltage you are connecting to is not higher than that stated on the decal or rear panel of the fixture. • This product is intended for indoor use only. • To prevent risk of fire or shock, do not expose fixture to rain or moisture.
2.
Figure 1: The Puck Q6 Unplugged™ Pin-Up Picture Super Fly Quad-Color LEDs Dual Mounting Yokes Acrylic Lens Protector Flat as a pancake! Figure 2: The Rear Connections DMX In DMX Out AC Power In/Out LED Control Panel Microphone The Puck Q6: Unplugged Manual Rev.
3. SETUP Fuse Replacement With a flat head screwdriver, wedge the fuse holder out of its housing. Remove the damaged fuse from its holder and replace with exact same type fuse. Insert the fuse holder back in its place and reconnect power. Connecting A Bunch of The Puck Q6 Unplugged™ Flat LED PAR Cans You will need a serial data link to run light shows using a DMX-512 controller or to run shows on two or more fixtures set to sync in master/slave operating mode.
Using The Battery System The Puck Q6 Unplugged™ features our proprietary intelion™ LithiumIon internal battery system which allows the user to the flexibility to operate their light fixture without AC power for up to 20 hours. The battery system’s built-in microprocessor controls charging and overall battery health, so all you need to do is plug and play. A charge indicator on the back of the fixture turns from RED to GREEN when charging is complete.
4. OPERATING ADJUSTMENTS NOTE: After making any adjustment, hold the
To set a custom color in Master/Slave / Standalone Mode: Using this function, you can select any color by adjusting the Red, Green, Blue and Amber / White values from 0-255. You may also adjust the color balance of the fixture. Please note that modifying the values in this step will affect ALL modes, therefore we recommend resetting all levels to their highest value (255) after using this mode. NAnu from the control panel, then hit . 2.) Choose rEd, GrEE, bLuE or UhIT then hit to confirm.
USING THIS FIXTURE WITH THE wiCICLE® WIRELESS DMX SYSTEM In addition to the unbridled thrill you already received the first time you plugged in your fixture, you’ll be delighted to know that This fixture also works seamlessly with our wiCICLE® Wireless DMX system, without additional power. • ONLY fixtures bearing this logo are certified for use with the wiCICLE® without external power. • Unauthorized modification and/or using the wiCICLE® with unapproved fixtures may cause damage to the wiCICLE® or fixture.
Each wiCICLE® acts as both a transmitter and a receiver, depending on whether a DMX source is applied to the integral XLR connector. This is an extremely powerful feature of the system, however, it also requires 1 piece of due dilligence, and that is the removal of extraneous DMX signals from your lighting rig BEFORE proceeding.
Troubleshooting Symptom Solution Fixture AutoShut Off Check the fan in the fixture. If it is stopped or moving slower than normal, the unit may have shut itself off due to high heat. This is to protect the fixture from overheating. Clear the fan of obstructions, or return the unit for service. Beam is Dim Check optical system and clean excess dust/grime. Also ensure that the 220V/110V switch is in the correct position, if applicable.
5. APPENDIX A Quick Lesson On DMX DMX (aka DMX-512) was created in 1986 by the United States Institute for Theatre Technology (USITT) as a standardized method for connecting lighting consoles to lighting dimmer modules. It was revised in 1990 and again in 2000 to allow more flexibility. The Entertainment Services and Technology Association (ESTA) has since assumed control over the DMX512 standard. It has also been approved and recognized for ANSI standard classification.
Keeping Your Puck Q6 Unplugged™ As Good As New The fixture you’ve received is a rugged, tough piece of pro lighting equipment, and as long as you take care of it, it will take care of you. That said, like anything, you’ll need to take care of it if you want it to operate as designed. You should absolutely keep the fixture clean, especially if you are using it in an environment with a lot of dust, fog, haze, wild animals, wild teenagers or spilled drinks.
Tech Specs! Weight & Dimensions Length 8.25 inches (210 mm) Width 3.75 inches (95.25 mm) Height 7.5 inches (190.5 mm) Weight 7.65 lbs (3.47 kg) Power Operating Voltage 90-230VAC, 50-60 Hertz Fuse 3A 250V Power Consumption 35W Light Source LED 6x 10-Watt (4*2.5-watt) Quad-Color RGBA (Q6A) / RGBW (Q6W) LED’s 60K hrs. Optical Beam Angle 25 degrees 29 degree field Luminous Intensity 7,630 Lux @ 1m (Full White) Red 2,000 Lux @ 1m Green 1,650 Lux @ 1m Blue 2,500 Lux @ 1m Thermal Max.
This page has been intentionally left blank. The Puck Q6: Unplugged Manual Rev.
This page has been intentionally left blank. The Puck Q6: Unplugged Manual Rev.
Enjoy your product! Our sincerest thanks for your purchase! --The team @ Blizzard Lighting
