Instruction Manual

ManualsBrandsBleep ManualsElectronicsPOS. Terminal

Table Of Contents

空白頁面

Manufacturer : Bleep (UK) PLC

Address : Unit 1, Rowan House, 9-31 Victoria Road, London, NW10 6DP

Product Name : POS. Terminal

Model Number : TS813

Bleep (UK) PLC makes no representations or warranties with respect to the contents

hereof and specifically disclaims any implied warranties of merchantability or fitness

for any particular purpose. Furthermore, Bleep (UK) PLC reserves the right to revise

this publication and to make changes from time to time in the contents hereof without

obligation of Bleep (UK) PLC to notify any person of such revisions or changes.

Possession, use, or copying of the software described in this publication is authorized

only pursuant to a valid written license from Bleep (UK) PLC.

WARNING

This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be

required to take adequate measures.

WARNUNG

Dies ist ein Klass A Produkt. In einer örtlichen Umgebung kann dieses Gerät Funkstörungen verursachen.

ATTENTION

Ce produit est de classe A. Dans un environnement domestique, il peut causer des interférences radio. Auquel

cas, l’utilisateur sera amené à prendre les mesures adéquates.

Atenciõn

Este es un producto de la clase A. En ambientes domésticos éste producto puede causar radio interferencias en cuyo caso el usuario

deberá tomar las medidas oportunas.

FCC Notice

This equipment has been tested and has been found to comply with the limits for a Class A digital device, pursuant to Part 15 of the

FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated

in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used

in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in

a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at the

users own expense.

Changes or modifications not expressly approved by manufacturer for compliance could void the user’s authority to operate the

equipment.

Summary of content (7 pages)

PAGE 1
Manufacturer : Bleep (UK) PLC Address : Unit 1, Rowan House, 9-31 Victoria Road, London, NW10 6DP Product Name Model Number : POS. Terminal : TS813 WARNING This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. WARNUNG Dies ist ein Klass A Produkt. In einer örtlichen Umgebung kann dieses Gerät Funkstörungen verursachen. ATTENTION Ce produit est de classe A.
PAGE 2
(C) Copyright Bleep (UK) PLC 2004. All rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written consent of Bleep (UK) PLC. All trademarks and registered trademarks are the property of their respective holders.
PAGE 3
Environment specifications Feature Ambient Temperature Humidity Storage Min Max -20°C 60°C Operating Min Max 5°C 35°C See Note 2 See Note 2 Comment See note 1 No condensation Note 1: Care should be taken to ensure that the unit might not be subjected to temperatures outside of this specification. Extreme hot or cold (particularly whilst operational) may cause permanent damage to the system and could invalidate your warranty.
PAGE 4
Must have 1× key upgrade External Must have 1×MINI USB Device External Internal Connector Must have 5×USB Internal Must have 2×RS232 Internal (RX,TX) connector for printer board Must have 2×12v output connector Must have 2×5V output connector Must have 4×GPIO connector Must have 1×RTC connector 2PIN 2.0mm Must have 1×ON/OFF Key output connector 2PIN 2.0mm Must have 1×I2C output for capacitance touch screen(OPTIONAL) Must have 1×Ethernet connector 6PIN 2.
PAGE 5
It is equally important to ensure that all peripherals (printers, computers, modems etc) are also on the same dedicated power circuit as the ECR units. Where clean power is not available, ensure that you install stand-alone power filters or similar. Mounting Since heat will build up inside the terminal during normal operation, ventilation holes are provided around the unit.
PAGE 6
TS-813 Touch Screen Terminal (Android) Designed to cope with every aspect of the F&B industry System Features • • • • • • 13.3” eDP TFT Colour LCD Panel (1366x768) 13.3” PCAP Touch Panel Wi-Fi 802.11b/g/n Android 6.0 SD card socket 8GB built-in flash storage Processor • • CPU：Amlogic ARM S912 Cortex-A53 Octa-core, 2GHz. 2Gb DDR3 RAM I/O ports • 3 x LAN （2 x external, 1 x internal） • 7 x USB 2.
PAGE 7
FCC Caution: To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example - use only shielded interface cables when connecting to computer or peripheral devices). FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.