Digitales Radio mit Uhr RX+45e
RX+45e 2
RX+45e 3
RX+45e 4
RX+45e 5
RX+45e 6
RX+45e 7
RX+45e 8
RX+45e 9
RX+45e 10
RX+45e 11
RX+45e 12
RX+45e 13
RX+45e 14
RX+45e 15
RX+45e 16
RX+45e 17
RX+45e 18
RX+45e 19
RX+45e 20
RX+45e 21
RX+45e 22
RX+45e 23
RX+45e 24
RX+45e 25
RX+45e 26
RX+45e 27
RX+45e 28
RX+45e 29
RX+45e 30
RX+45e 31
RX+45e 32
RX+45e 33
RX+45e 34
RX+45e Important Safety Instructions Important Safety Instructions Caution: To reduce the risk of electric shock, do not dismantle the product and do not expose the apparatus to rain or moisture. No user-serviceable parts inside. Refer servicing to qualified personnel only.
RX+45e Conformity Model number: RX+45e Description: Digital Radio with Clock Brand name: Blaupunkt Responsible party: M3 Electronic GmbH Gutenbergstrasse 5, D-65830 Kriftel. Germany Hereby, Blaupunkt Competence Center Audio M3 Electronic GmbH, declares that this Class 1 equipment is in compliance with the essential requirement and other relevant provisions of Directive 1999/5/EC. Letter of conformity can be obtained from info@m3-electronic.de. Safety Instructions 1.
RX+45e 11. Heat - The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products, including amplifiers that produce heat. No naked flame sources, such as lighted candles, should be placed on the apparatus. 12. Water and moisture - To reduce the risk of fire or electric shock, do not expose the product to train, dripping, splashing or excessive moisture such as in a sauna or bathroom.
RX+45e 24. The only means of completely disconnecting the product from the power supply is by removing the power cord from the wall outlet or the product. The wall outlet or the power cord entry to the product must remain freely accessible at all times while the product is in use. 25. Try to install the product near a wall socket or extension cord and shall be easily accessible. 26. The highest environmental temperature suitable for this product is 35°C. 27.
RX+45e Illustrations Front view 1. Standby/Mode Press and release to power on Press and hold to power off When the radio is on, press and release to switch modes (DAB/FM) 2. Rotary volume control 3. Rotary tune control Press to enter/make a selection 4. Scan 5. Info 6. Shift (use to store/recall Presets 6-10) 7. Alarm/Sleep/Snooze 8. Presets (10 DAB/10 FM) 9. Speaker 10.
RX+45e Back view 11. Telescopic aerial 12. Power supply socket 13.
RX+45e Instructions for use Where to put your radio It is important that you consider carefully in advance where your radio will be situated and make sure that it is: * on a flat and stable surface Note: Never place your radio on antique or polished surfaces. * within 1.4 metres of a power socket * where you can fully extend the telescopic aerial * away from bright sunlight or heat sources, such as a radiator * not in a humid or very damp place such as a bathroom Setting up 1.
RX+45e DAB Mode What is DAB Digital Radio? DAB means Digital Audio Broadcasting. The difference between a DAB radio and a conventional AM/FM radio is that broadcasts are transmitted digitally resulting in a high quality audio sound*, without any hiss, fading or crackles. Your DAB radio will automatically scan and find all the available stations for you.
RX+45e 3. You can also do manual tune, firstly you have to know the frequency of the station you would like to listen to, press and hold "Enter" knob for a few seconds, it will show "Manual tune", then frequency will show up, e.g. 11B 218.64MHz. You can rotate Tune rotary control knob to select frequency, your radio will auto scan all the stations in this frequency and display the station name in lower line. After scan is complete, it will play the first station in this frequency.
RX+45e Multiplex name Displays the broadcasting area and collection of radio stations on this frequency e.g. BBC National DAB, Digital 1 Network. Signal strength The information provided gives details of the signal strength you are receiving. An empty ” ” will appear on the second line of the display to indicate the minimum signal strength for acceptable listening. The row of solid rectangles indicate the actual signal strength that you are receiving.
RX+45e FM mode Briefly press the ‘Standby’ button on the top of your radio to go to FM mode. When your radio is in FM mode it can receive Radio Data System or ‘RDS’ information if this is being transmitted by the broadcaster. RDS information will often include the station name, detail about the programme and the current time. If you were listening to an FM station when you switched the radio off then this station will be automatically selected when you switch the radio back on.
RX+45e Note: If no FM station has been stored under the preset button, ‘Preset X empty’ will be displayed, where ‘X’ is the number of the preset location, then the radio will revert to the previously selected radio station after a few seconds. FM display information When listening to an FM station you can change the information that will appear on the second line of the display. There are several different types of information that are sent by the broadcaster.
RX+45e Setting the Alarm Note: Check that the radio has the correct time and date from the DAB signal before you set an alarm. 1. Press and hold the ‘Alarm/Sleep/Snooze’ button to enter alarm mode. 2. ‘Alarm Status’ will be displayed and ‘ON’ or ‘OFF’ will flash on the second line of the display. Use the right hand rotary control to change the display to ‘ON’ or ‘OFF’ as required and press the right hand rotary control to confirm. 3.
RX+45e Simple solutions If you are experiencing problems with your radio, there are some quick and easy checks that you can do, which may help to solve the problem. Radio reception is poor - Please check that the aerial is FULLY extended for the maximum signal strength and improved reception. - Try moving your radio to an alternative location to see if the reception improves. Please remember to scan for DAB stations again once you have moved your radio. See page 42.
RX+45e Technical information Technical specification Power adaptor: Output 5V/1A Input 100-240V/50-60Hz DAB frequency range: Band III, 174 MHz - 240 Mhz FM frequency range: 87.5 MHz to 108 MHz Reset your radio You can reset your radio and restore all of the original factory settings. Note: If you reset your radio all of your DAB and FM station presets and alarm settings will be deleted. 1. Press and hold the ‘Info’ button on the top of the radio until the software version is displayed.
RX+45e This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed at the end of its life separately from your household waste. There are separate collection systems for recycling in the EU. For more information, please contact the local authority or your retailer where you purchased the product. All rights reserved by Blaupunkt Competence Center Audio M3 Electronic GmbH.