Instruction Manual 40” Full HD TV - BP4000F
CONTENTS General Safety 4 Installation 8 Wall Mounting Instructions 9 Controls and Connections 10 Remote Control 12 Getting Started 15 Basic Operations 16 Media 17 Menus 18 Picture Settings 18 Sound Settings 19 Channel Settings 20 Lock Settings 22 Time Settings 23 Setup Settings 24 EPG 25 Recording 26 FAQs 27 Specifications Last Page Customer Helpline Last Page
GENERAL SAFETY Read this manual thoroughly before you start using the TV. Store this manual, the completed warranty card, your receipt and the product packaging. The safety precautions instructions reduces the risk of fire, electric shock and injury when correctly complied to. Please follow all instructions and take notice of all warnings.
GENERAL SAFETY (CONT.) IMPORTANT INFORMATION • Do not expose this appliance to rain or moisture as it may result in fire or an electric shock hazard • Do not tamper or change or modify the product in any way. • Only use Accessories outlined and recommended by the manufacturer. • Please do not expose the product to splashing or water contact • Please do not place any object on top of the product including objects filled with liquids such as vases. • Danger of explosion if battery is incorrectly placed.
GENERAL SAFETY (CONT.) • Please beware that Dust could accumulate over time on the unit and cause it to generate heat and or deteriorate insulation, which in turn may result in an electrical fire. • The product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or young children of any age, They must be supervised product by a person responsible for their safety.
GENERAL SAFETY (CONT.) Please make sure upon positioning this product, the place is: • Not wet or damp and Well ventilated • Away from direct sunlight or heaters. • Away from splashes or food. • Protected from excessive dust or grease. • Do not install this equipment in a confined space such as a bookcase or similar unit. • Do not install the TV set near heat sources such as radiators, stoves or other audio visual equipment that produce heat.
INSTALLATION Install the stand as described below, or if you want to mount it to a wall, please contact a professional installer. Please ensure the TV is not plugged into the wall socket and furthermore we recommend to get another person to assist in the following task. Attaching the stand Step 1 Place a soft cushioned material on top of a flat surface to prevent damaging the screen panel. Then place the TV screen flat on top, with the screen side facing down, as illustrated on the right.
INSTALLATION (CONT.) Wall-Mounting Instructions Please ensure the TV is not plugged into the wall socket and furthermore we recommend to get another person to assist in the following task. • We recommend you use a professional installer as we assume no liability for any eventual damage to the product or injury to yourself if you mount the TV on your own. BACK OF TV VESA PATTERN: 200 (w) x 200 (h) mm NOTE: If you are wall-mounting the TV, this should be done by a qualified installer.
CONTROLS AND CONNECTIONS 10
CONTROLS AND CONNECTIONS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10.
REMOTE CONTROL
REMOTE CONTROL (CONT.
REMOTE CONTROL (CONT.) Using the Remote Control • Battery should normally last for about one year. • Do not mix old and new batteries in the remote • Do not use different types of battery • If you do not intend to use the unit for a long time, please remove batteries from the remote to avoid accident. 14 • Keep batteries away from children and pets. • Never throw batteries into a fire. • Do not drop, or impact the remote control as it void warranty immediately.
Getting Started TURN THE POWER ON OR OFF: • Plug the power cord into a suitable power point, • Turn on the power switch. • Press the STANDBY/ON button • When you switch on the TV for the first time, the First Time Setup menu will be displayed on the screen, as per the image below. • • Press the navigation arrows to highlight the language you want to select and press OK. Now you will go to the Tune Type Page, change it to only DTV. (ATV does not work in Australia anymore).
Basic Operations Selecting an Input Source • Press the SOURCE button on the remote control, to display the input source list. • Press the • You can access connected USB drives by selecting USB. • NOTE: The first time you use this TV, make sure to go through the first time installation buttons to select the input source, and then press OK to confirm. and auto-search for all the DTV channels.
Media MEDIA PLAYBACK • First insert a USB Device into the TV • Press “USB” on SOURCE Menu. • Use the directional arrow keys to Select FILE TYPE and then through folders within your USB device to access your file.
Menus PICTURE SETTINGS To access Picture settings, press the MENU button and go to picture.
Menus (CONT.
Menus (CONT.) CHANNEL To access CHANNEL settings, press the MENU button and go to CHANNEL.
Menus (CONT.
Menus (CONT.) LOCK MENU To access LOCK settings, press the MENU button and go to Lock. Default factory password is “0000”, then you can set your own password to lock the TV.
Menus (CONT.) TIME SETTINGS To access TIME settings, press the MENU button and go to TIME.
Menus (CONT.) SETUUP SETTINGS To access Setup settings, press the MENU button and go to SETUP.
Electronic Program Guide (EPG) EPG Guide (DTV Mode Only) • • Press the TVG button on the remote control to display the above interface. Before viewing EPG information, you have to ‘activate’ each channel for which you want to view program information. To do this, press the buttons to select a channel in the left column, then press OK to confirm.
Recording 26
FAQS GENERAL PROBLEMS WITH TV SET PROBLEM SOLUTION No Power. Make sure power plug is inserted correctly into power outlet. No Picture. Make sure the following is connected correctly • Adjust the antenna • Move TV away from any products that may cause interference. • Autotune the unit again • Go to another channel No sound or distorted sound • • • • • • Make sure everything is connected correctly Check if input settings for TV is correct Audio settings are properly set Make sure volume is not muted.
SPECIFICATIONS Resolution 1920 x 1080 Display Colours 16.7M Contrast ratio: 3000 : 1 Aspect Ratio 16 : 9 Movie: MPG / AVI / TS / MOV / MKV / DAT / MP4 Multimedia Playback Format under Music: MP3 / WMA / AAC USB Mode Photo: JPG / JPEG / BMP / PNG Power Source 100-240V ~ 50/60Hz Power Consumption 60W USB 5V --- max. 500mA With stand: 907 (w) × 207 × 568 (h) mm Dimensions Without stand: 907 (w) × 81 × 519 (h) mm Net: 5.29 kg Weight Gross: 7.19 kg CUSTOMER HELPLINE: info@ayonz.
