www.blaupunkt.
Statement according to FCC | Service and Warranty Statement according to FCC Statement according to FCC part 15.21 Modifications not expressly approved by this company could void the user's authority to operate the equipment. Statement according to FCC part 15.105 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Contents Adjusting the volume ....................... 76 About these instructions ................ 66 Changing the switch-off time (OFF TIMER) .................................... 77 If you are installing device yourself.. 67 Observe the following! .................... 67 The functions of the audio sources... 79 The displays of the audio sources ... 80 Cleaning notes ................................. 68 Tuner mode ..................................... 82 Disposal note ...............................
Contents Limiting Alternative frequencies to regional programmes (REG ON/ OFF) ............................................. 86 Receiving the programme type ........ 87 Switching programme type on/off (PTY ON/OFF) .............................. 87 Selecting the programme type language (PTY LANGUAGE) .......... 87 Selecting a programme type ........ 87 CD mode (audio)............................. 88 Starting the audio CD mode ............ 88 The audio CD display .......................
Additional settings........................ 113 Changing the welcome text (ON MESSAGE).............................. 107 Configuring the preamplifier output for the subwoofer (SUBOUT)......... 113 Changing the clock settings (CLOCK MENU).............................. 107 Switching time display on/off .... 108 Selecting 12h/24h time display (12HR/24HR MODE) .................. 108 Setting the clock ........................ 108 Activating/deactivating demo mode..............................................
About these instructions About these instructions These instructions contain important information to easily and safely install and operate the device. • Read these instructions carefully and completely before using the device. • Keep the instructions at a location so that they are always accessible to all users. • Always pass on the device to third parties together with these instructions. In addition, observe the instructions of the devices used in conjunction with this device.
You may only install the device yourself if you are experienced in installing car sound systems and are very familiar with the electrical system of the vehicle. For this purpose, observe the installation instructions at the end of these instructions. NEDERLANDS Observe the following! ENGLISH If you are installing device yourself tion permits it! Stop at a suitable location to perform extensive settings. • Remove or attach the control panel only while the vehicle is standing an.
For your safety Cleaning notes Solvents, cleaning and scouring agents as well as dashboard spray and plastics care product may contain ingredients that will damage the surface of the device. • Use only a dry or slightly moistened cloth for cleaning the device. • If necessary, clean the contacts of the control panel regularly using a soft cloth moistened with cleaning alcohol.
Scope of delivery DEUTSCH Scope of delivery SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH The scope of delivery includes: 1 Hamburg MP57 1 Operating instructions 1 Case for the control panel 1 Support frame 2 Disassembly bar 1 USB connecting cable 1 Microphone for Bluetooth phone calls 69
Device description Device description What can the device do? In addition to the tuner, the device features an integrated CD player for playing audio CDs and MP3/WMA CDs. Your device is equipped with an RDS receiving unit to conveniently listening to the radio. For example, you can use the RDS functions TA and EON for the priority of traffic information stations or PTY for searching for stations with your preferred programme type.
5 6 7 8 9 : > ? @ ENGLISH < FRANÇAIS 4 ; and Tuner: Tuning into stations manually CD, USB: Selecting previous/next track TRAF button Switching traffic information priority on/off (press short), switching alternative frequencies on/off (press long) MENU/OK button Calling the menu, "OK function" in the menus (press short), scanning track/radio station – SCAN function (press long) Rocker switches and Tuner: Tuning into stations automatically (station seek tuning) CD, USB: Selecting previous/next track
Theft protection Theft protection Detaching/attaching the control panel Device card You can detach the control panel to protect against theft. In case of a theft, the device card on the back of these instructions together with the purchase receipt is your proof of ownership. Please enter your serial number on the card. Displaying the serial number Every device has a separate 17-digit serial number. To display it, switch of the device.
Note: Blaupunkt cannot guarantee the proper functioning of all USB media available on the market! Connecting the USB cable To connect a USB medium, the supplied USB cable must be connected to the rear of the device before installing the car sound system. For further details, please read the installation instructions. The USB cable can then be routed to the glove compartment or a suitable place of the center console.
Startup Bit rate MP3: 32 to 320 kbps WMA: 32 to 192 kbps Under Windows 2000/XP, the FAT32 formatting creates a maximum partition size of 32 GB. If you are using a USB medium with more than 32 GB, it may result in read errors for additional partitions. If a large number of files is stored on your USB medium, the speed of the file search may be reduced. Selecting the USB as audio source 쏅 Press the SCR button > repeatedly until the MP3 display appears. The display briefly shows "READING USB".
Startup Format Only MP3 or WMA files, folders, playlists Number Max. 999 tracks in 99 folders Naming of files File extension ".wma"/ ".mp3" Max. 16 characters (more characters are possible, but they reduce the max. number of files) No special characters or umlauts Bit rate MP3: 32 to 320 kbps WMA: 32 to 192 kbps DEUTSCH Note: Label CDs only by using a marker since it does not contain any caustic materials. Permanent markers can damage CDs. 쏅 Press the button 1. The control panel opens.
Startup 쏅 Close the control panel. The display briefly shows "READING DISC". Next, the following appears: • The audio CD display if an audio CD is inserted. • The MP3 display if an MP3 or WMA CD is inserted. The CD starts playing. Selecting the CD as audio source You can select an inserted CD as audio source: 쏅 Press the SOURCE button > repeatedly until the desired display appears. Note: The CD mode can be selected only if a readable CD is inserted.
Resetting the device (NORMSET) You can reset the device to the factory settings (see appendix A1). Your personal settings. e.g. your welcome text, will be deleted in the process. 쏅 Press the MENU/OK button 9. 쏅 Press the rocker switch = until "VARIOUS MENU" appears on the display. To cancel the mute function: 쏅 Press the On/Off button 3 again. OR 쏅 Turn the volume control 4.
Overview of the operation Overview of the operation The following information was compiled to provide you with an overview of how to operate the menus of the device: • The most important buttons for menu operation • The most important functions of the audio sources • The displays of the audio sources Buttons for menu operation The device features menus which allow you, for example, to change the sound settings.
The functions of the audio sources Some functions during the playback of music, such as forward or reverse music, are activated with the rocker switches and : as well as and =. SOURCE (selecting the audio source) MP3/ WMA CD Audio CD USB Tuner CD (CD-R) USB FRONTAUX-IN CDC AUX OFF ENGLISH Tuner FRANÇAIS Button No operation possible of the device.
Overview of the operation The displays of the audio sources • The CD·C display indicates whether a If you select an audio source, the corresponding display appears. The following display elements can be found on all displays: • The display indicates that the traffic information priority is switched on. CD is in the CD slot (CD display) or a CD changer is connected (CD•C display). When you play the CD, a border is also shown.
MP3 INFO 01:23 J H G A B C D E F G H J Traffic information priority Display for CD3 Track name (file name) Sound presetting (PRESET) Random playback (MIX) Repeat function (RPT) Playing time4 MP3 info (album, artist)5 Display for MP3 03 Track Disc 02 CD·C REPEAT J F A B C D E F G H I 01:23 06:17 H E F MIX ROCK POP CLAS REPEAT G Traffic information priority Display for CD changer Track number Playing time Sound presetting (PRESET) Random playback (MIX) Repeat function (RPT) Time6 CD number E
Tuner mode Tuner mode Starting the tuner mode (BAND) This device can receive radio stations in the FM frequency ranges as well as MW and LW. 쏅 Press the BAND button 2 to directly call up the tuner display. OR Set the device to the region Europe, USA or Thailand The device is set to the frequency ranges and station technologies of the region in which it was purchased. You can adjust this setting to the different frequency ranges and station technologies of Europe, the United States or Thailand.
LW You can now perform the following actions in this waveband/memory bank: • Tuning into a station • Storing stations Tuning into a station There are three ways of tuning into a station: • Tuning into stations automatically (station seek tuning) • Tuning into stations manually • Selecting stored stations Station seek tuning 쏅 Press the rocker switch or =. If you press and hold the rocker switch or =, automatic seek tuning skips the stations found until you release the rocker switch again.
Tuner mode The stored station is called up, provided that it can be received at the current vehicle position. The display shows the frequency of the station or the station name, provided that the station broadcasts this RDS information. Storing stations There are two ways of storing a station: • Storing stations manually • Searching and storing stations automatically (Travelstore) Storing stations manually After tuning into a station, it can be stored as follows: 쏅 Press the station button 9 for approx.
As soon as the tuner has located a station, it is played. After a complete search of the frequency band, scanning stops. The previously set station is played. You can do the following at any time: • Store the currently scanned station (press any station button 9 for approx. two seconds) • Cancel the scan (briefly pressing the MENU/OK button <) Switching the priority of traffic reports on/off The priority of traffic reports is switched on symbol.
Tuner mode A signal tone appears if you leave the broadcast area of the traffic information station or switch to a station that does not support the traffic information priority. If a different audio source than the tuner is active, the device automatically searches for a traffic information station. Skipping a traffic announcement To cancel a traffic announcement without switching off the priority of traffic announcements: 쏅 Press the TRAF button ;. The previously active audio source is played again.
Tuner mode Switching programme type on/off (PTY ON/OFF) The "PRY ON/OFF" menu item is shown in the "TUNER" menu. 쏅 In the "TUNER" menu, use the rocker switch or : to select between the settings • "PTY ON": Programme type on • "PTY OFF": Programme type off DEUTSCH ENGLISH FRANÇAIS Note: If you activated the PTY function, you can no longer use the rocker switch or : for manual station search. 쏅 Next, start a station seek tuning with the rocker switch or =.
CD mode (audio) CD mode (audio) Audio CDs are played in the CD mode (audio). How to insert and remove CDs is described in the chapter "Startup". The audio CD display A B 03 Track CD TEXT CD·C Starting the audio CD mode You can select an inserted CD as audio source: 쏅 Press the SOURCE button > repeatedly until the audio CD display appears. The playback starts. Note: As long as the CD is in the drive, the device stores track and playing time of the previously played CD.
Display/description Press the 5 button 9. "PAUSE": Pauses the playback. Press again: Continues the playback Selecting tracks Press the rocker switch or :. : Playing the next track : Repeats the track. Press again: Plays the previous track Fast search Press and hold the rocker switch or :. Audibly scanning a track forward or back Scanning tracks Press the MENU/OK button < for longer than two seconds. "SCAN": Scans all tracks on the CD (scan time can be adjusted: chapter "User settings").
CD/USB mode (MP3/WMA) CD/USB mode (MP3/WMA) In CD/USB mode, you can play CD-Rs or CDRWs or a USB medium with MP3 or WMA tracks. The chapter "Startup" describes what you must observe when connecting and disconnecting USB media. It also contains information about inserting and removing CDs. Starting the CD/USB mode You can select an already inserted CD-R or CD-RW or a USB medium as audio source: 쏅 Press the SOURCE button > repeatedly until the MP3 display appears. The playback starts.
MIX ROCK POP CLAS REPEAT A Currently playing track Track Folder B Selected track (playback with rocker switch :) C Up and down arrows indicate in which direction you can scroll Note: The device can play playlists that were created with an MP3 manager, such as WinAmp or Microsoft Media Player. The playlists must be stored in the root folder of the data carrier.
CD/USB mode (MP3/WMA) Displaying title information To show all the available information about the current track (artist and album) on the display: 쏅 Press the MENU/OK button <. 쏅 Press the rocker switch = until "VARIOUS MENU" appears on the display. 쏅 Press the rocker switch : to open the menu. 쏅 Press the rocker switch or = repeatedly until "MP3 INFO ON/OFF" appears on the display. 쏅 Switch between the settings with the rocker switch or :.
The functions of this table refer to the MP3 displays with playing time or time mode. For the functions in Browse mode, please read the section "Selecting a track in the playlist (Browse mode)". Action Response Interrupting playback (PAUSE) Press the 5 button 9. Selecting folders Press the rocker switch or =. : Selecting the next folder : Selecting the previous folder Selecting tracks Press the rocker switch or :. : Playing the next track : Repeats the track.
CD-changer mode CD-changer mode You can connect the following CD changers to the device. • Blaupunkt CDC A03 • Blaupunkt CDC A08 • Blaupunkt IDC A09 How to insert CDs in the CD changer magazine is described in the instructions of your CD changer. Switching to CD-changer mode Note: To be able to select the CD changer as audio source, at least one CD must be in the magazine. To select a connected CD changer as audio source: 쏅 Press the SOURCE button > repeatedly until the CD changer display appears.
Action Display/response Press the 5 button 9. "PAUSE": Pauses the playback. Press again: Continues the playback Selecting tracks Press the rocker switch or :. : Playing the next track : Repeats the track. Press again: Plays the previous track Fast search Press and hold the rocker switch or :. Audibly scanning a track forward or back Scanning tracks Press the MENU/OK button < for longer than two seconds. "SCAN": Scans all tracks of all CDs (scan time can be adjusted: chapter "User settings").
AUX mode AUX mode The device features two AUX-IN sockets (REAR-AUX and FRONT-AUX) to which you can connect external audio sources such as portable CD players, MiniDisc players or MP3 players. REAR-AUX input at the rear of the device You can connect either a Blaupunkt CD changer or an external audio source to the REAR-AUX input. A Blaupunkt CD changer is automatically recognised and is then available as audio source.
As soon as an audio source is connected to the FRONT-AUX-IN socket, it can be selected with the SOURCE button >. "AUX" appears on the display followed "AUX INPUT". The volume of the FRONT-AUX source can be adjusted to the other audio sources (Tuner, CD, etc.). For further information on setting the input level, please read the section "Configuring audio inputs", "Adjusting amplification" in this chapter. Note: These menu items can be called up only if no CD changer is connected.
AUX mode • "AUX ON": The corresponding audio input is activated and can be selected as audio source using the SOURCE button > • "AUX OFF": The audio input is deactivated and cannot even be selected as audio source with the SOURCE button > if an external audio source is connected. Renaming the REAR-AUX input (AUX NAME EDIT) If you select the REAR-AUX input as audio source, "AUXILIARY1" appears on the display.
Prerequisites for Bluetooth phone calls are a Bluetooth-capable cell phone and the installation of the supplied microphone (see the installation instructions). The appendix lists the cell phone that are compatible with the car sound system. How is a Bluetooth connection established? The Bluetooth technology is a wireless connection with a short range. That is, the cell phone must be close to the car sound system (in the vehicle). First, activate the Bluetooth function.
Bluetooth phone call 쏅 The "PAIR" menu item is displayed in the "BLUETOOTH" menu. 쏅 Press the rocker switch : to open the menu. "BT ON" appears on the display. The Bluetooth function is activated. Registering the cell phone You can register the device with up to 5 Bluetooth-capable cell phones. If you register a sixth one, the cell phone registered first disappears. 1. Mobile Mobile Mobile Mobile Mobile 1 2 3 4 5 Mobile 6 2.
If you are receiving a call, the display shows "INCOMING CALL" and the phone number of the caller. The active audio source is muted and the ring tone is sent to the loudspeakers. If the device is switched off, it automatically switches on. In case of an incoming call, you must answer or reject the call. At this time, it is not possible to perform other operations using the car sound system. To reject the call: button 8. 쏅 Press the The display shows "CALL ENDED". To answer the call: button 7.
Bluetooth phone call Now you can enter a phone number: 쏅 Press the rocker switch or = to select a number. The numbers are scrolled from 0 to 9. 쏅 Select the next digit with the rocker switch : to enter the next number. If you entered the wrong number, you can delete the characters by pressing and holding the rocker switch or :. button 8 to make the 쏅 Press the call. The display shows "CALLING" and the selected phone number. Ending a call To end a call: button 7. 쏅 Press the The display shows "CALL ENDED".
OR 쏅 Press the On/Off button 3 for approx. 2 seconds. The car sound system is switched off and your caller is redirected to your cell phone. 쏅 Press the MENU/OK button < to finish the PIN input and to store it. Note: To finish the PIN input without changing the PIN, press the ESC/DIS button 5. ITALIANO Changing the PIN (PIN CHANGE) ENGLISH 쏅 Press the rocker switch or = to change the digit. The numbers are scrolled from 0 to 9.
Sound settings Sound settings (AUDIO MENU) The following sound settings can be changed in the "AUDIO" menu: • Adjusting volume and volume distribution • Selecting the sound presetting • Changing equalizer settings • Switching off the equaliser Note: If you want to adjust the volume of "BASS" and "TREBLE", first select the audio source for which you want to use the settings. CD·C AUDIO MENU mp3 USER MENU MIX ROCK POP CLAS RPT To call up the Audio menu: 쏅 Press the MENU/OK button <.
Your device features a digital 3-band equalizer. It allows you to adjust the sound to your vehicle and your personal preferences and eliminate problems, such as droning or poor voice comprehension. approx. –4 Very transparent, aggressive sound, no stereo effect 1000– 2500 approx. –4 to –6 Muffled sound, low transparency, instruments do not excel 8000– 12500 approx. +4 to +6 Insufficient bass 50–100 approx. +4 to +6 Tip: Insert a CD which you know very well if you want to adjust the equalizer.
Sound settings AUDIO MENU ENHANCED MENU E-BASS E-TREBLE E-MIDDLE E-XBASS Level (GAIN) -7 to +7 - -7 to +7 0 to +3 Frequency (FREQ) 60 Hz, 80 Hz, 100 Hz, 200 Hz 10 kHz, 12.5 kHz, 15 kHz, 17.5 kHz 500 Hz, 1000 Hz, 1500 Hz, 2500 Hz 50 Hz, 100 Hz 200 Hz Quality factor (QFAC) 1.0, 1.25, 1.5, 2.0 - 0.5, 0.75, 1.0, 1.
When you switch on the device, an animation appears. It is factory set to "BLAUPUNKT". To change this text, call up the Various menu: 쏅 Press the MENU/OK button ?. 쏅 Press the rocker switch or = until "VARIOUS MENU" appears on the display. CD·C VARIOUS MENU mp3 USER MENU MIX ROCK POP CLAS RPT 쏅 Press the rocker switch : to open the menu. 쏅 Press the rocker switch or = repeatedly until "ON MESSAGE" appears on the display. 쏅 Press the rocker switch : to display the text input.
User settings 쏅 Press the rocker switch or = repeatedly until "CLOCK MENU" appears on the display. 쏅 Press the rocker switch : to open the menu. The Clock menu appears. Switching time display on/off The time can be displayed while the device is switched off, if the vehicle ignition is switched on. To switch this time display on/off: 쏅 In the Clock menu, press the rocker switch or = repeatedly until "CLOCK ON/OFF" is displayed.
VOLUME MENU mp3 USER MENU ROCK POP CLAS RPT To call up the "VOLUME" menu: 쏅 Press the MENU/OK button ?. 쏅 Press the rocker switch or = repeatedly until "VOLUME MENU" appears on the display. 쏅 Press the rocker switch : to open the menu. The "VOLUME" menu appears. Changing the presetting of the power-on volume (ON VOLUME/LAST VOLUME) The device is factory set to play the previously used volume after switch-on (but not to exceed the value 38). You can change the power-on volume.
User settings 쏅 Adjust the desired volume with the rocker switch or = (levels 0 to 66). Notes: The volume preset by you will not be used, • if the volume currently listened to is lower than the set mute level. In this case, traffic announcements are reproduced with the volume listened to. • if the volume currently listened to is higher than the set TEL volume. In this case, phone calls/navigation announcements are reproduced with the volume listened to.
mp3 USER MENU MIX ROCK POP CLAS RPT To call up the Display menu: 쏅 Press the MENU/OK button ?. 쏅 Press the rocker switch or = repeatedly until "DISPLAY MENU" appears on the display. 쏅 Press the rocker switch : to open the menu. The display menu appears. Adjusting the display viewing angle (ANGLE ADJ) The angle at which the driver looks at the display is dependent upon, among other things, the installation position of the device, the seating position, and the physical size of the driver.
User settings Changing the scan time (SCAN TIME) The scan time of the scan function is preset for all audio sources to 10 seconds. The scan function is not available for external audio sources. You can change the scan time in the Various menu. 쏅 Press the MENU/OK button <. 쏅 Press the rocker switch = until "VARIOUS MENU" appears on the display. CD·C VARIOUS MENU mp3 USER MENU MIX ROCK POP CLAS RPT 쏅 Press the rocker switch : to open the menu.
CD·C AUDIO MENU mp3 USER MENU MIX ROCK POP CLAS RPT 쏅 Press the rocker switch : to open the menu. 쏅 Press the rocker switch = until "ENHANCED MENU" appears on the display. CD·C ENHANCED MENU mp3 AUDIO MENU Activating/deactivating demo mode The Demo mode uses animations to show you which functions the device offers. 쏅 Switch off the radio. 쏅 Press the station buttons 1 and 5 9 while switching the radio on again. The demo mode starts. To quit the demo mode again, repeat both steps.
Error correction Error correction If the device does not function properly, switch the device off and on again. If problems still persist, you can easily correct the following problems. Problem Possible cause Possible remedy The menus do not appear as shown in these instructions. The tuner cannot be adjusted to the frequencies listed in the technical data. The device is not set to your region. Set the device to your region.
Technical data max. 10 A < 3.5 mA Amplifier output power acc. to DIN 45324: max. power: 4 x 25 W sine 4 x 45 W at 14.4 V Preamplifier output (Preamp Out) 4 channels: 3V Input sensitivity Rear AUX-IN: Front AUX-IN: Tel./Navi input: 2 V / 6 kΩ 500 mV / 6 kΩ 10 V / 1 kΩ Tuner FM waveband (FM): AM waveband: LW waveband: FM frequency response: 87.5–108 MHz 531–1602 kHz 153–279 kHz 35–16,000 Hz CD player Frequency response: 20–20,000 Hz USB port Current load max.
Service and Warranty Service Warranty In some countries Blaupunkt offers a specific repair service including a pick-up service. If you want to use this service, you may request a pick-up service for your device via the Internet. Refer to www.blaupunkt.com to check if this service is available in your country. We provide a manufacturer's warranty for products bought within the European Union.
EON – Enhanced Other Network In case of a traffic announcement, the device switches over from a non-traffic information station to a traffic information station of the same station chain. After the traffic announcement, the system switches back to the previously heard programme. Quality factor – QUALITY It determines the filter quality of the equalizer, i.e. the edge steepness and filter bandwidth, dependent upon the characteristic frequency. ID3 tags ID3 tags contain additional information for MP3 files (e.g.
Glossary changes to alternative frequencies of the set stations that broadcast the same regional programme. Root folder Main folder of a data carrier. The root folder contains all other folders. Shape CDs A shape CD is a CD whose form deviates from the usual circular shape. It can be cornered or contoured. The non-circular form does not allow the device to correctly center and read the CD in the drive. This results in damage to the CD drive.
Demo mode 113 Device card 72 DIAL NEW (dialing a phone number) 101 DIM DAY, DIM NIGHT (brightness for day and night) 111 Display Audio sources 80 Settings 111 Displaying the serial number 72 Displaying title information 92 Disposal 68 119 ENGLISH D BALANCE 104 BASS 104 BEEP ON, BEEP OFF 110 Bluetooth 99, 117 Activating, deactivating 99 Changing the PIN 103 Connection 99, 100 Making a phone call 101, 102 Preparation 99 Broadcasting network 83, 85, 118 BT ON, BT OFF 99 FRANÇAIS B A ITALIANO Alternati
Index E N E-BASS, E-MIDDLE, E-TREBLE 106 E-XBASS 106 EDIT AUXILIARY 98 ENHANCE, ENHANCED SETTINGS 105 Equaliser 106 External audio source: see AUX NORMSET 77 F Factory settings: see Resetting (NORMSET) FADER 104 FM1, FM2, FM3, and FMT 83 FREQ 106 Frequency 106 G GAIN 106 I ID3 tags 92, 117 Installation, self-installation 67 L LAST VOLUME 109 M Memory bank 82 MENU button 71, 78 MIX 79 MODE, 12HR and 24HR 108 MP3 73, 90, 92 MUTE: see Muting MUTE LEVEL 109 Muting 77 120 O OFF TIMER 77 ON MESSAGE 107 ON
Index T TA VOLUME 109 TEL VOLUME 109 Traffic announcements 79, 117, 118 Skip 86 Traffic reports Switching the priority on/off 85 TRAVELSTORE 84, 118 TREBLE 104 Tuner 79, 82, 118 Alternative frequency (AF) 86 Seek tuning sensitivity 84 ENGLISH U ITALIANO FRANÇAIS UNPAIR 100 UNPAIR ALL 100 Unregistering (Bluetooth) 100 USB medium 79, 118 connecting 73 Requirements 73 Selecting 74, 90 V NEDERLANDS VOLUME 109 Volume 71, 76 Changing presettings 109 Increase, speed-dependent 110 W SVENSKA Safety 66, 67 SC
Appendix A2 Supported Bluetooth cell phones Appendix A1 Factory settings TA VOLUME ON VOLUME EF81 30 Motorola L6 • RAZR V3i LAST VOLUME Nokia 6111 • 6230i • 6280 • N70 MUTE LEVEL 0 TEL VOLUME 25 CDC DISPLAY PLAY TIME CD DISPLAY PLAY TIME AUX OFF SENSITIVITY HI6 PTY OFF PTY LANGUAGE ENG CLOCK OFF CLOCKSET 0:00 CLOCK MODE 24H BEEP ON REG OFF DIMMER DIM DAY 15, DIM NIGHT 12 TURN ON MESSAGE BLAUPUNKT OFF TIMER 15 TUNER DISPLAY FREQUENCY MP3 DISPLAY FILE NAME CD TEXT
373 SVENSKA Bitte den ausgefüllten Gerätepass sicher aufbewahren! Please keep the filled-in radio pass in a safe place! Prière de conserver soigneusement la carte d’autoradio remplie ! Tenete per favore il libretto di apparecchio, debitamente riempito, in un posto sicuro! Bewaar de ingevulde apparaatpas op een veilige plaats! Vänligen förvara ifyllt apparatpass på säker plats!
Germany Austria Belgium Denmark Finland France Great Britain Greece Ireland Italy Luxembourg Netherlands Norway Portugal Spain Sweden Switzerland Czech. Rep.