Product Brochure

†
Production rates achieved will be aected by variables specic to each job site. These gures are not guarantees of
performance. For proper operation, the shot blasting unit must be used in conjunction with an appropriate dust collector.
Always wear appropriate eye, ear and respiratory protection for the application, as specied by OSHA regulations and
your employer. Never operate or maintain equipment before reading and understanding the instructions for operation
and maintenance. Obey all safety signs and instructions while operating or maintaining equipment.
Products manufactured and marketed by Blastrac are protected by patents issued or pending in the United States and other countries. Blastrac reserves the
right to change the specications referred to in this literature at any time, without prior notice. Blastrac is a registered trademark owned by Blastrac, NA.
© 2015 Blastrac, NA All rights reserved. V0216.
The Trusted Choice of Professionals for Over 30 Years
1.800.256.3440 • BLASTRAC.com
The 05-BL-233 is a quality hand-held grinder designed
specically for concrete prep and coatings removal.
The heavy-duty design of the 05-BL-233 provides
solid performance when grinding for concrete
preparation along walls, around protrusions, and those
hard-to-access areas, and oers dependability
for removing epoxies and mastics when utilizing
appropriate grinding disks and wheels.
Built with a die-cast, aluminum gear housing, the
05-BL-233 has a 120V, 15 amp motor that runs at 6600
rpm and easily handles diamond cup wheels as well
as grinding disks. The motor has easy to access carbon
brushes and features a safety switch to guard against
unintentional starts. The 05-BL-233 accepts a 7” disk on
its 5/8-11 threaded spindle. For user preference, the
grip handle can be positioned at one of three places on
the gear housing. With a comfortable overall length of
19” the 05-BL-233 weighs a moderate 9 lbs.
The new Blastrac 05-BL-233 is also available
with a one-piece, premium full dust shroud that
mounts without tools. The shroud is essential for
controlling airborne dust and particulate while
grinding. When coupled with the BDC-1114-PKG
or BDC-1216 dust collector, and equipped with
the Blastrac full shroud or hinged shroud, the
05-BL-233 operates with nearly all dust eliminated. The
operator can breathe easier while observing the work
area more safely, increasing job productivity.
05-BL-233
Concrete Grinding Systems
HAND-HELD GRINDER
SPECIFICATIONS:
Grinding Width: 7 in. (178mm)
Prod. Capacity
†
: 150/200 sq.ft./hr
Motor: 6600 rpm
Amperage: 15A
Voltage: 120, 1ø, 60 Hz
Power Cord: 6 ft. (1.8m)
Dust Hose Connection: 2 in. (50.8mm)
Dimensions: L 19 in. x W 4.5 in. x H 5 in.
(483mm x 114mm x 127mm) w/o handle
attached
Weight: Net 9 lbs (4kg)
FEATURES AND BENEFITS:
• Fits into smaller spaces, great for edging
walls and obstructions
• Safety switch to guard against
unintentional start-ups
• Powerful 6600 rpm motor
• Easily accessible and replaceable carbon
brushes
• Die-cast aluminum gear housing
• Auxiliary handle easily positions right, left
or top of housing
• Operates virtually dust-free when used
with a Blastrac shroud and connected
to the BDC-1114-PKG or BDC-1216
05-BL-233 shown with Hinged
Premium
Dust Shroud.
The auxiliary handle mounts easily
to several position.
Blastrac oers a variety of
application specic diamond cup
wheels and grinding disks.
05-65710 Full
Premium Dust Shroud
05-65713 Hinged
Premium Dust Shroud