DR590X-2CH Manual ENGLISH
Table of Contents Introduction .................................................................5 Playing and managing video files using your computer (Windows/macOS) .................................................................. 30 Important safety information ....................................6 Removing the microSD card ..................................................................................30 Overview ......................................................................9 In the box .
Cloud settings ...........................................................................................................65 Resolution ....................................................................................................................................................................... 53 Enable Cloud Lite service ............................................................................................................. 65 Image quality .................................................
About the Cloud Service ...........................................83 Connect to BLACKVUE CLOUD (Optional) ............................ 83 Optional accessories .................................................88 Parking mode battery (Optional) .......................................... 88 Power Magic Battery (B-112) ................................................. 88 Power Magic Ultra Battery (B-124X)...................................... 89 External connectivity module (Optional) ........................
ENGLISH Introduction Thank you for purchasing this BlackVue dashcam made by Pittasoft Co., Ltd. This instruction manual contains information on how to operate your dashcam. Before using your dashcam, we recommend that you read through this manual to ensure correct usage. To improve the performance of the product, the contents of this manual are subject to change without prior notice. Note y A formatted microSD card is provided with the BlackVue dashcam when you purchase the product.
Important safety information For user safety and to avoid property damage, read through this manual and follow these safety instructions to use the product correctly. DANGER Failure to observe the following directions could result in death or property damage: y Do not disassemble, repair, or modify the product yourself. Doing so may cause fire, electric shock, or malfunction. For internal inspection and repair, contact the service center.
ENGLISH WARNING Failure to observe the following directions could result in death or serious injury: y Do not leave the product near infants, children, or pets. There is a risk of them swallowing small components, and/or their saliva may get into the product, causing an explosion due to a short circuit. y Do not spray water or wax directly onto the product while cleaning the inside of the car. Doing so may cause fire, electric shock, or malfunction.
CAUTION Failure to observe the following directions could result in injury or property damage: y Do not spray cleaning products directly onto the product. Doing so may cause discoloration, cracks, or malfunction. y If the product is used outside the optimal temperature range (-20°C – 85°C / -4°F – 185°F), performance can decline or malfunctions may occur. y Make sure that the product is installed properly. If installed incorrectly, vibrations may cause the product to fall, and may cause physical injury.
ENGLISH Overview In the box Check the box for each of the following items before installing the BlackVue dashcam. Front camera Rear camera Cigarette lighter power cable Rear camera connection cable Quick start guide Cable clips (5 EA) microSD card microSD card adapter Double-sided tape for the Mounting Brackets Hardwiring power cable (Optional) External GPS - USB Type (Optional) Note y The illustrations in this manual may differ from the product.
At a glance The following diagrams explain each part of the BlackVue dashcam. Front camera Camera lens 34 mm 42.6 mm Lock button 111.8 mm Mounting bracket Front security LED : Lights on during (i) normal mode, (ii) an event is being recorded (impact detected), (ii) manual recording has started, or (iv) motion is detected in parking mode. : Blinks slowly during parking mode motion detection standby. Recording LED : Lights orange in normal mode.
ENGLISH Removing and inserting the front camera Rear camera connection port GPS connection port or External connectivity module port Cover DC in (Power connector) Wi-Fi Button microSD card slot – Press once to turn on/off Wi-Fi. y To remove the dashcam from its bracket, press the LOCK button and pull the dashcam out of the mounting bracket. y To insert the dashcam into its bracket, push the dashcam into the mounting bracket until it "clicks" in.
Rear camera Camera lens 25 mm 31 mm Mounting bracket 67.4 mm V out (Front camera connection port) Rear security LED : Stays on in all recordings modes but can be turned off from firmware settings. Removing and inserting the rear camera y To remove the rear camera from its bracket, hold the mounting bracket and pull the rear camera out. y To insert the rear camera into its bracket, push the rear camera into the mounting bracket until it "clicks" in.
ENGLISH Installation Installing the BlackVue dashcam Install the front camera behind the rear view mirror. Install the rear camera at the top of the back windshield. Remove any foreign matter and clean and dry the windshield before installation. Warning y Do not install the product in a location where it can obstruct the driver's field of vision. 1 Turn off the engine. Open the cover of the microSD card slot, gently push the card into the slot until it locks into place and close the cover.
2 Peel off the protective film from the double-sided tape and attach the front camera to the windshield behind the rear-view mirror. 3 Adjust the angle of the lens by rotating the body of the front camera. We recommend pointing the lens slightly downwards (≈10° below horizontal), so as to record video with a 6:4 road to background ratio. 4 Peel off the protective film from the double-sided tape and attach the rear camera to the rear windshield.
Connect the front camera ('Rear' port) and the rear camera ('V out') using the rear camera connection cable. 6 Use the pry tool to lift the edges of the rubber window sealing and molding and tuck in the rear camera connection cable. ENGLISH 5 Rear camera connection cable 7 GPS receiver or connectivity module (Optional): Plug in the GPS receiver or connectivity module and attach it in a corner of the windshield. Use the pry tool to tuck in the cable.
8 Plug the cigarette lighter power cable into the cigarette lighter socket and the front camera. Skip to 12 for Hardwiring Power Cable setup. 9 Use the pry tool to lift the edges of the windshield trim/molding and tuck in the power cord. Rear camera connection cable Power cord 10 Turn on the engine. The BlackVue dashcam will power up and start recording. Video files are stored on the microSD card. 11 Turn off the engine. The dashcam will automatically stop recording and power down.
ENGLISH removing fuse panel cover, find a fuse that powers on when engine is turned on (ex.cigarette lighter socket, audio, etc) and 12-1 After another fuse that remains powered on after the engine is turned off (ex.hazard light, interior light). Connect the ACC+ cable to a fuse that powers on after engine start, and BATT+ cable to a fuse that remains powered on after engine is turned off. Note y To use battery saver feature, connect the BATT+ cable to the hazard light fuse.
Note y Up to 50 event recordings (impact, manual) can be locked from being overwritten. By default, this feature is enabled. In the firmware settings, you can choose to either overwrite them with new event files when the event file storage is full or lock the 50 event files and save the new event files in loop recording storage. Please note that formatting the microSD card deletes all the recordings including the locked event files.
ENGLISH Playing and Managing Videos Playing and managing video files using your smartphone (Android/iOS) Opening video files 1 Search for the BlackVue app in the Google Play Store or Apple App Store and install it on your smartphone. 2 “Pair” your smartphone with the BlackVue dashcam via direct Wi-Fi: a. Press the Wi-Fi button once to turn on Wi-Fi. b. Go to your smartphone's Settings then select Wi-Fi, and make sure Wi-Fi is turned on.
c. Choose your BlackVue dashcam from the network list. The dashcam’s default SSID begins with its model number (e.g. BlackVue590X-******). d. Enter the password and tap join. * The default Wi-Fi SSID and password is labeled on the dashcam. To find them, unplug the cables and remove the front camera from its mount. e. Open the BlackVue app and select Wi-Fi. f. Select the video file you want to play from the video list.
ENGLISH BLACKVUE WI-FI screen composition Live view Firmware settings SIM card activation Multi selection File type Filter Date Filter Video file menu Video list File Type Video Source Note y All images shown are for illustration purpose only. Actual app may differ from images shown.
Playing video Playing back videos Select the video file you want to play from the video list. Scroll up/down the screen to refresh the video list. Identify video files by recording type Normal Event Parking The dashcam records in normal mode by default. When the dashcam detects an impact while in normal or parking mode, it switches to event mode and saves an event recording beginning 5 seconds before the event trigger. Exceeding the set speed limit will also trigger an event recording.
ENGLISH Checking the displayed time & GPS data The time the video was recorded is displayed in the lower left corner of the video in the playback screen. If the displayed time in the recorded videos is incorrect please see "Time settings" on page 51 or 71. Landscapes View Download to Internal Memory Front and rear camera Tap the screen Date, Time & Speed Model name The vehicle's speed is displayed in the lower-left corner of the video. Tap the screen to playback the video.
Real-time streaming video (Live View) You can view in real-time the video currently being recorded by connecting your smartphone to the dashcam via direct Wi-Fi. 1 Go to your smartphone's Settings > Wi-Fi and connect to your dashcam. 2 Open the BlackVue app. Select WI-FI and tap the 3 Rotate your smartphone to switch between portrait and landscape display modes. 4 You can switch the dashcam view by pressing the Front/Rear button. button.
ENGLISH Managing videos Managing videos in Wi-Fi You can manage the recorded videos using the BlackVue app. Note y When the microSD card fills up, the newest video files will start to replace the oldest video files (called loop recording) – so you will always have the most recent video files. Copy to Internal Memory To copy individual files to your smartphone, tap next to the video you want to copy. Select Download. To copy multiple files to your smartphone in one go tap .
Managing videos in INTERNAL MEMORY Open the BlackVue app and select INTERNAL MEMORY. Tap to see file options. You can delete, copy or move files, change the name of files.
To delete multiple files from your smartphone in one go, tap to select all files. Tap to delete the selected files. or tap To delete individual files, tap ENGLISH Deleting videos and select Delete. Select which files to delete, next to the video you want to delete. Select Delete.
Creating a new folder To create a new folder, tap . Enter a new folder name and press Add. Deleting a folder To delete a folder, tap and select Delete. Copying and pasting videos To copy multiple files in one go, tap and select Copy. Select which files to copy, or tap to select all files. Tap to copy the selected files. Go to another folder and tap to paste the selected files there. To copy individual files, tap 28 BLACKVUE next to the video you want to copy. Select Copy.
at the top of the screen. Select which files to move, or tap To move multiple files in one go, tap Tap and go to another folder and tap to move the selected files there. ENGLISH Moving videos to select all files. To move individual files, tap next to the video you want to move. Select Move. Go to another folder and tap to move the file there. Renaming a video To rename a video, tap next to the video you want to rename. Select Change name. Enter a new name and tap OK.
Playing and managing video files using your computer (Windows/macOS) Removing the microSD card 1 Unplug the power cord to turn off the dashcam. 2 Open the cover of the microSD card slot. 3 To remove the microSD card, gently press on the card to release the lock then carefully pull the card out. To insert the microSD card, gently push the card into the slot until it locks into place and close the cover.
1 Remove the microSD card from the dashcam. 2 Insert the card into the microSD card reader and connect it to a computer. 3 Download BlackVue Viewer from www.blackvue.com > Support > Downloads and install it on your computer. 4 Run BlackVue Viewer. 5 To play, select a video and click on the play button or double click the selected video. ENGLISH Opening video files in BlackVue Viewer Select SD card viewer in the launcher page.
Viewer screen composition (Windows/macOS) When you execute the program, a launcher window will be shown. You can choose either SD card Viewer or Cloud Viewer. To go back to the launcher screen, click the button. File type Filter Format micro SD card Date Filter Playback screen Settings Back to launcher page Select SD card Select the folder GPS data Map screen Recorded file list Timeline for hour selection G-Sensor information Note y All images shown are for illustration purpose only.
ENGLISH Playing video Playing back videos In BlackVue Viewer double click a video file to play. BlackVue Viewer shows by default the files in the microSD card. To see files in another folder click the button and browse to the folder. Identify video files by recording type Normal Event Parking The dashcam records in normal mode by default.
Using BlackVue Viewer Flip horizontally Flip vertically Expand second camera view Capture image (paused) Close second camera view File name View full screen Previous frame Play/pause Next frame Playback time Playback speed control Volume control 34 BLACKVUE
ENGLISH Exploring the timeline and G-Sensor graph You can check the impact sensitivity (G-Sensor) information in the line graph.
Zoom options y Use the mouse scroll wheel zoom. Right clicking will restore the video to the default size. y You can resize the playback frame or the BlackVue Viewer window by dragging the borders. y Full-screen view: Double click on the video image to enter full-screen view. Double click again or tap ESC to return to the default view.
ENGLISH Checking the GPS data You can check the GPS data of the recorded video in BlackVue Viewer while video is playing back. The driving speed and coordinates are displayed above the map frame. Note y GPS data is not recorded during parking mode. Map data cannot be displayed for parking mode recordings.
Managing videos You can manage the recorded videos through the BlackVue Viewer program. You can also format the microSD card. Note y If the microSD card is full, by default the dashcam will record over the oldest videos first. Capturing or printing a still image from video 1 Double click a file in the file list to play. 2 Click the 3 Select the pause button to pause the video. capture button to capture the image.
ENGLISH Exporting videos 1 Point a mouse at a video you want to export and Click the right mouse button. 2 Click Export.
3 If you want to extract a segment of a file, edit the start and end second points from Select segment. To export without audio select Sound Off. 4 5 6 Click the OK button. Select the folder in which to save the file and enter the file name. Click the Save button. Copying videos 1 Point a mouse at a video you want to download and Click the right mouse button. 2 Click Download. 3 Select the folder in which to copy the file and enter the file name. 4 Click the Select folder button.
ENGLISH Tips for optimal performance Formatting the microSD card Caution y Back up necessary video files before formatting the microSD card. If you format the microSD card, all the video files stored in the microSD card will be deleted including the locked event files. Your saved settings will not be affected. Format using BlackVue Viewer (Windows) 1 Insert the microSD card into the microSD card reader and connect the reader to your computer. 2 Download BlackVue Viewer (Windows) from www.blackvue.
Format using BlackVue Viewer (macOS) 1 Insert the microSD card into the microSD card reader and connect the reader to your computer. 2 Download BlackVue Viewer (Mac) from www.blackvue.com > Support > Downloads and install it on your computer. 3 Launch the BlackVue Viewer that is installed on your computer. 4 Click the 42 BLACKVUE Format button and select the microSD card from the list of drives in the left frame.
After selecting your microSD card select the Erase tab in the main window. 6 Select “MS-DOS (FAT)” from the Volume Format drop-down menu and click Erase. ENGLISH 5 Note y Formatting the microSD card once a month is recommended. y Format the microSD card if the recorded video quality appears to be poor. y Only use official BlackVue microSD cards. Other cards may have compatibility issues. PittaSoft Co., Ltd.
Upgrading the firmware Regularly upgrade the firmware for performance improvements and updated features. Firmware updates will be made available for download at www.blackvue.com > Support > Downloads. Your saved settings are not affected by firmware upgrade. Upgrading the firmware using an iOS or Android device (Firmware Over The Air) Click here for a step-by-step video tutorial, or go to the main menu and select Help > Video tutorials. Makes sure your smartphone has a stable internet connection.
Go to your smartphone's Settings then select Wi-Fi, and make sure Wi-Fi is turned on. 7 Choose your BlackVue dashcam from the network list. The dashcam’s default SSID begins with its model number (e.g. BlackVue590X-******). 8 Enter the password and tap join. * The default Wi-Fi SSID and password is labeled on the dashcam. To find them, unplug the cables and remove the front camera from its mount.
9 Open the BlackVue app. Select WI-FI > > Firmware upgrade. Note y The firmware version currently installed on the microSD card is shown first. Below it, the firmware version you downloaded in step 4 is shown. 10 Tap OK to apply the firmware upgrade. 11 The dashcam's firmware will be upgraded – this may take a few minutes. The dashcam needs to reboot to complete the firmware upgrade. Caution Please make sure the dashcam is powered on until normal recording starts after the upgrade is completed.
ENGLISH Upgrading the firmware using a computer (Windows/macOS) Keep your BlackVue dashcam updated by upgrading the firmware to the latest version. Visit the BlackVue website (www.blackvue.com) to check for any new firmware releases for your BlackVue dashcam model. 1 Insert the microSD card into the microSD card reader. 2 Connect the microSD card reader to a computer. 3 Launch BlackVue Viewer > Select SD card Viewer and click on the About y For Mac users, click 4 button.
7 Unzip the downloaded file and copy the BlackVue folder to the microSD card. 8 Insert the microSD card into the dashcam and connect the power to initiate the firmware upgrade. Make sure the power remains on until the upgrade is completed. Any power interruption may prevent the firmware upgrade from completing, resulting in malfunction. Note y Do not insert or remove the microSD card when the dashcam is turned on. Doing so may damage the data and cause a malfunction of the microSD card.
ENGLISH Changing settings Changing settings using your smartphone (Android/iOS) “Pair” your smartphone with the BlackVue dashcam via Wi-Fi direct (for details see "Opening video files" on page 19). 1 Go to your smartphone's Settings > Wi-Fi and connect to your dashcam. 2 Open the BlackVue app. Select WI-FI > 3 After making any changes, go back to the Firmware settings menu, tap to access the Firmware settings menu. and tap Save.
Basic settings 50 BLACKVUE
ENGLISH Time settings Select your time zone to auto-sync with GPS time or you can set the time and date manually after enabling Manual time setting.
Note y The factory setting is GMT -11. Some examples of GMT time offsets are: - GMT-7: Los Angeles - GMT-4: New York - GMT+0: London - GMT+1: Paris - GMT+3: Moscow - GMT+8: Singapore - GMT+9: Seoul - GMT+10: Sydney If you are unsure of your GMT offset please look up your city on https://greenwichmeantime.com/ * Selecting Daylight saving time will advance the clock by one hour. y When setting the time manually, please set to the expected time you will use the BlackVue ( not the present time).
ENGLISH Video settings Resolution Resolution and frame rate is fixed at "FHD@30 + FHD@30". This means the front camera records Full HD video at 30 frames per second, and the rear camera records Full HD video at 30 frames per second. Note * Frame rate may vary during Wi-Fi streaming.
Image quality You can adjust the recording image quality (bit rate) settings. Choose between: y Highest (Front: 12 Mbit/s, Rear: 10 Mbit/s) y High (Front: 10 Mbit/s, Rear: 8 Mbit/s) y Normal (Front: 8 Mbit/s, Rear: 6 Mbit/s) Increasing the image quality will increase the size of the video files. Loading and copying time will increase accordingly. Enhanced night vision The dashcam has intrinsic night vision feature. If you want to enhance it, enable Enhanced night vision.
ENGLISH Recording settings Normal recording When turned off the dashcam does not record in normal mode. Parking mode recording If enabled, the dashcam switches from normal mode to parking mode when the vehicle is turned off (ACC+) or stationary for 5 minutes (G-Sensor). There are two parking mode options. Choose "Motion & Impact detection" to save a parking recording when motion is detected in the dashcam's field of view.
Rear camera recording in parking mode When turned on, the front and rear camera record together. When turned off, the rear camera stops recording 5 minutes after entering parking mode. Rear camera recording restarts when entering normal mode. Voice recording When turned off the dashcam does not record audio. Date & time display Turn on/off the date and time display on videos. Speed unit Select km/h, MPH, or turn off. Video segment length Video segment length is fixed at 1 minute.
ENGLISH Front camera rotation If you installed the front camera in a flipped position, use this setting to rotate the front camera image 180°. Rear camera orientation Use this setting to rotate the rear camera image 180° or mirror the video.
Sensitivity settings 58 BLACKVUE
ENGLISH G-Sensor (Normal mode) / G-Sensor (Parking mode) The G-sensor measures the movement of your vehicle through 3 axes – up and down, side to side, and front and back. When the G-sensor detects significant or sudden movement (such as an impact or collision) it will trigger an event recording. You can adjust the sensitivity so minor incidents and bumps don't trigger an event recording. To turn off event recordings by impact detection set the G-sensor sensitivity to off.
Motion detection (Parking mode) In Motion Detection Parking Mode the dashcam continuously buffers video and saves a parking recording when motion is detected in the dashcam's field of view.
ENGLISH System settings LED Recording status You can turn the recording status LED on/off. Front security (Normal mode) You can turn the front security LED on/off for normal mode. Front security (Parking mode) You can turn the front security LED on/off for parking mode. Rear security You can turn the rear security LED on/off.
LTE (Parking mode) You can turn the LTE LED on/off for parking mode. Wi-Fi (Parking mode) You can turn the Wi-Fi LED on/off for parking mode. Voice guidance Impact detected in parking mode Notifies when exiting parking mode if an impact had been detected during parking mode, however, it ignores any impact detected within three minutes before exiting parking mode. Volume You can adjust the volume of the voice guidance (announcements).
ENGLISH Battery Protection (Optional - Hardwiring Power Cable installation only) When the battery protection is on, power is supplied to your BlackVue while the vehicle is off (ACC+ off) and also prevents the vehicle from battery discharge while it is parked. When enabled, BlackVue will automatically power down according to the set cut-off timer and voltage. Note y Recommended settings for low voltage cut-off is 12V or higher during winter.
Wi-Fi settings Login credentials You can change the dashcam's SSID and Wi-Fi login password. Wi-Fi auto turn off Wi-Fi will automatically switch on when you turn on the dashcam and remain on. You can adjust the settings for Wi-Fi to automatically turn off. ON Wi-Fi auto turn off 64 BLACKVUE Wi-Fi turns off if it is inactive for 10 minutes. OFF Wi-Fi does not turn off automatically.
ENGLISH Cloud settings Enable Cloud Lite service If you don't use the Cloud Lite service you can turn it off.
Push notification settings You can customize when you want to receive push notifications.
ENGLISH FW Language You can change the Firmware language of your dashcam.
Changing settings using your computer (Windows/macOS) Click on the its operation. 68 BLACKVUE Settings button to open the BlackVue settings panel.
ENGLISH BlackVue Viewer settings Select language Select your preferred language for the BlackVue Viewer interface from the dropdown list. Speed unit on map Change the speed unit displayed on the map. Select map service Change the mapping service used. Picture-in-picture(PIP) playback On some computers videos may not play smoothly in PIP view. If you encounter issues please disable PIP playback.
Firmware settings Select your preferred language for the firmware from the FW language dropdown list. The audio announcements by the dashcam will be in the selected language. Caution y Please backup necessary recordings before changing time or image quality settings. If any of the aforementioned settings are changed and saved, the dashcam will format the microSD card and delete all recordings stored on the card including locked event files in order to ensure optimal performance.
ENGLISH Basic settings Time settings Select your time zone to auto-sync with GPS time or you can set the time and date manually after enabling Manual time setting. Note y The factory setting is GMT -11. Some examples of GMT time offsets are: - GMT-7: Los Angeles - GMT-4: New York - GMT+0: London - GMT+1: Paris - GMT+3: Moscow - GMT+8: Singapore - GMT+9: Seoul - GMT+10: Sydney If you are unsure of your GMT offset please look up your city on https://greenwichmeantime.
Video settings – Resolution Resolution and frame rate is fixed at "FHD@30 + FHD@30". This means the front camera records Full HD video at 30 frames per second, and the rear camera records Full HD video at 30 frames per second. Note y Frame rate may vary during Wi-Fi streaming. – Image quality You can adjust the recording image quality (bit rate) settings.
ENGLISH Recording settings – Normal recording When turned off the dashcam does not record in normal mode. – Parking mode recording If enabled, the dashcam switches from normal mode to parking mode when the vehicle is turned off (ACC+) or stationary for 5 minutes (G-Sensor). There are two parking mode options. Choose "Motion & Impact detection" to save a parking recording when motion is detected in the dashcam's field of view.
– Lock event files Turning on this option will lock the following recording types and stop them from being overwritten by newer recordings: - Impact event recordings during normal and parking mode (E) A maximum of 50 files can be locked. Once this limit is reached, to lock new recordings please review locked files on the microSD card and free up space, or enable ‘Overwrite locked event files when full’ to allow the oldest locked files to be overwritten.
ENGLISH Sensitivity settings G-Sensor (Normal mode) / G-Sensor (Parking mode) The G-sensor measures the movement of your vehicle through 3 axes – up and down, side to side, and front and back. When the G-sensor detects significant or sudden movement (such as an impact or collision) it will trigger an event recording. You can adjust the sensitivity so minor incidents and bumps don't trigger an event recording. To turn off event recordings by impact detection set the G-sensor sensitivity to off.
Motion detection (Parking mode) In parking mode the dashcam continuously buffers video and saves a parking recording when motion is detected in the dashcam's field of view. You can adjust the sensitivity of the motion detection so minor motion caused by wind or rain doesn't trigger a recording. Please take into account your vehicle's surroundings when adjusting the sensitivity.
Click the Advanced settings button. Double click the video from the list that you want to use as a G-Sensor data reference. Set the thresholds by adjusting the control bars next to each G-Sensor axis. Any G-Sensor data that crosses over the threshold on any of the 3 axes will trigger an Event recording. Event recording will occur 4 ENGLISH 1 2 3 No event recording will occur Click Save and close.
System settings LED – Recording status You can turn the recording status LED on/off. – Front security (Normal mode) You can turn the front security LED on/off for normal mode.
ENGLISH – Front security (Parking mode) You can turn the front security LED on/off for parking mode. – Rear security You can turn the rear security LED on/off. – LTE (Parking mode) You can turn the LTE LED on/off for parking mode. – Wi-Fi (Parking mode) You can turn the Wi-Fi LED on/off for parking mode. Voice guidance You can adjust the voice guidance (announcements) you want to hear.
Speed alert Set a speed limit (up to 300 km/h or 200 MPH) for the speed alert. When the vehicle exceeds the specified speed limit, the dashcam beeps and switches to event recording. After saving one event recording file the dashcam switches back to normal mode recording.
ENGLISH Wi-Fi settings Login credentials You can change the dashcam's SSID and Wi-Fi login password. Wi-Fi auto turn off Wi-Fi will automatically switch on when you turn on the dashcam and remain on. You can adjust the settings for Wi-Fi to automatically turn off. ON Wi-Fi auto turn off Wi-Fi turns off if it is inactive for 10 minutes. OFF Wi-Fi does not turn off automatically.
Push notification settings You can customize when you want to receive push notifications. Applying the settings You can automatically apply the configuration by inserting the microSD card into the BlackVue dashcam and turning it on. Configure the settings before using the dashcam. To reset all settings to their defaults press the Reset button at the bottom of the settings panel.
ENGLISH About the Cloud Service Using a BlackVue connectivity module device (CM100GLTE-M), you can connect your dashcam to the internet and take advantage of the following features in the BlackVue app and BlackVue Cloud Viewer: Live Location – When sending live image, it shows you location information of the live image.
2 Register your dashcam with your account (i) In the BlackVue app select CLOUD and login to your account. (ii) Tap Yes to enable push notifications (this setting can be adjusted at any time later). (iii) Select Register new camera. (iv) Register your camera using one of the following methods: QR Code: Press Scan QR Code and line up the QR Code on your smartphone’s screen. QR code/Cloud code/Serial number or Manual registration: Enter your camera’s Serial number and Cloud code and press Register.
The app will ask for your permission to access your dashcam's GPS data. If you allow access the app will be able to show you your dashcam's location and speed. If you don't allow access you won't be able to see your dashcam's location and speed (you can allow access later in Privacy settings).
3 Connect your BlackVue dashcam to Cloud connectivity (Using CM100GLTE-M) Make sure your BlackVue dashcam and connectivity module is connected. Then, follow the below steps for SIM registration. (i) Locate the SIM card slot. Unscrew the bolt from SIM slot cover. Then, unmount the SIM slot by using a SIM eject tool. Insert SIM in the SIM slot. Mount the SIM slot back in the connectivity module, then, screw the bolt to hold SIM slot cover.
ENGLISH Note y Cloud lite service is free of charge to the user for 1 year. For who wants to continue to use Cloud lite service, A payment plan must be subscribed. y For more details, please check our blackvuewebsite. (www.blackvue.com) Note y To use the BlackVue Cloud Lite Service, SIM card must be properly activated for Internet access via LTE-M network.
Optional accessories Parking mode battery (Optional) Parking mode is supported only if you use a Hardwiring power cable or a parking mode battery (ex. Power Magic Ultra Battery or Power Magic Battery Pack). To record Video when the engine is turned off without using the vehicle’s battery, you can install a parking mode battery. Power Magic Battery (B-112) The Power Magic Battery pack B-112 powers a single dashcam for up to 12 hours after 1 hours of rapid charging.
ENGLISH Power Magic Ultra Battery (B-124X) BL AC KV UE Power Magic Ultra Battery reaches a full charge in a record 40minutes when hardwired. Parking mode can last more than 24hours with a single-channel BlackVue. Compatible with the free BlackVue Battery Manager app. BLACKV Power Ma gic Ultra UE Battery B-1 24 Note y Double you capacity with the optional Expansion battery. y Power Magic Ultra Battery recharges with ignition on and powers your dashcam when ignition it off.
External connectivity module (Optional) To stay connected to the BlackVue Cloud over cellular data network, you can install an external connectivity module CM100GLTE-M. Note y You must subscribe to your recommended local network carrier for LTE-M services. y You will be subscribed to the BlackVue Cloud lite service at free of charge. y BlackVue Connectivity Module (CM100GLTE-M) may not be supported in some countries. Please refer to BlackVue website to see availability.
ENGLISH Troubleshooting Changing / resetting direct Wi-Fi SSID and password The dashcam's Wi-Fi SSID and password can be changed/reset using on of the following methods. On-device Wi-Fi SSID and password reset Press and hold the Wi-Fi button on the dashcam, for 5 seconds and once voice instructions start, release the button. Then press once again to reset the Wi-Fi SSID and password to default.
Change Wi-Fi SSID and password over the Cloud 1 Login to the BlackVue app. 2 Select CLOUD. Note y You can access FW settings Over the Cloud only when the dashcam is ON and connected to the internet (Cloud). A blue colored icon means the dashcam is connected to the Cloud while a grey colored icon means that the dashcam is not connected to the Cloud. 3 Tap next to your camera name and select Settings > Firmware > Wi-Fi > Login credentials. You can change the camera's SSID and Wi-Fi login password.
ENGLISH 4 Go back to the Firmware settings menu, tap and tap Save.
Change the Wi-Fi password using BlackVue Viewer (Windows/macOS) 1 Remove the microSD card from the dashcam. 2 Insert the card into the microSD card reader and connect it to a computer. 3 Launch BlackVue viewer. *You can download BlackVue Viewer from www.blackvue.com > Support > Downloads and install it on your computer. 4 In BlackVue Viewer click on the 5 Click the Firmware tab, then the Wi-Fi tab and under Login credentials change the password. 6 Click Save and close.
Model Name Color/Size/Weight Memory Recording Modes Camera Viewing Angle Resolution/Frame Rate Image Quality Video Compression Mode DR590X-2CH Front: Black/Width 111.8 mm x Height 34 mm/87.8 g Rear: Black/Width 67.4 mm x Height 25 mm/20.3 g microSD Card (32 GB/64 GB/128 GB/256 GB) Normal recording, Event recording (when impact is detected in normal and parking mode), Manual recording and Parking recording (when motion is detected) * When using Hardwiring Power Cable, ACC+ will trigger parking mode.
Backup Battery Input Power Built-in super capacitor DC 12V-24V (DC Plug (Ø3.5 x Ø1.
ENGLISH Recording time Your dashcam will automatically turn on and start recording when it is connected to a power source.
Disposal and recycling information Disposal of your BlackVue dashcam 1. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. Contact local authorities to learn about disposal and recycling options available in your area. 2. The correct disposal of your BlackVue dashcam will help prevent potential negative consequences for the environment and human health. 3.
ENGLISH Customer Support For customer support and firmware updates please visit www.blackvue.com You can also email a Customer Support expert at cs@pittasoft.com Before Requesting Service Please back up all important files and data before requesting service. In order to service the dashcam it may be necessary to delete all files and data from the dashcam. All servicing is provided on the basis that the user has backed up all necessary files and data before requesting service. Therefore Pittasoft Co., Ltd.
FCCID: ID:YCK-DR590X-2CH YCK-DR750X-2CH//HVIN: HVIN:DR590X-2CH DR750X-2CH / IC: 23402-DR590X2CH FCC Product Model Name Manufacturer Address Customer Support Product Warranty | | | | | | Car Dashcam DR590X-2CH Pittasoft Co., Ltd. / South Korea 4F ABN Tower, 331, Pangyo-ro, Bundang-gu, Seongnam-si, Gyeonggi-do, Republic of Korea, 13488 cs@pittasoft.com One-Year Limited Warranty facebook.com/BlackVueOfficial instagram.com/blackvueofficial www.blackvue.com Made in Korea COPYRIGHT©2020 Pittasoft Co., Ltd.