Blacknote® CDP 500 ITALIAN HI-TECH CD PLAYER Owner’s Manual MANUFACTURED IN ITALY TEL.+39.0571.675005 FAX.+39.0571.
CDP-500 Italian Hi-Tech CD Player Table Of Contents - Congratulations & Introduction 3 - Contents of Packaging - Construction Features 4 - Set-Up Instructions - Positioning – Operating Conditions 4 - Operating Conditions 5 - Remote Control Function 6 - Technical Specifications 7 - Warranty, Customer Service, Warnings & F.A.Q.
CDP-500 Italian Hi-Tech CD Player Congratulations Thank you for having purchased a Blacknote® product. Introduction Blacknote® is a very modern and Hi -Tech All Digital line of products designed to achieve the best audio performance available today. The CDP-500 is an audiophile CD player can read any kind of lossless high-Q CD disc. It is built starting from a luxury triple layer front luxury panel entirely made of black and silver anodized aluminium .
CDP-500 Italian Hi-Tech CD Player (Contents of Packaging ) 1 PLAYER UNIT 1 REMOTE CONTROL 1 DETACHABLE AC POWER CHORD INSTRUCTIONS AND WARRANTY CERTIFICATE . (Construction features ) This section describes the special features of the CDP-500 CD Player , the construction features, the reasons for the technical choices and the original ity of the design. The CDP-500 is a CD Player made in a dimensionally standard rack chassis.
CDP-500 Italian Hi-Tech CD Player (Operating Conditions ) Once the CDP-500 has been correctly assembled and positioned on a solid shelf and fully wired the player is ready to play. The CDP-500 front Panel replies six basic function of the unit: ON-OFF - It turns the unit ON/OFF c ompletely. STOP SKIP Forward Skip the track. Keeping pressed the unit searches on the track listened FFW. SKIP Reverse Skip the track. Keeping pressed the unit searches on the track listened RWD.
CDP-500 Italian Hi-Tech CD Player (REMOTE CONTROL ) During PLAY mode the DISP key turns off the display for user convenience. The MUTE key shut-off the unit. To access directly to the tracks dial the number and w ait for automatic track access. REPEAT mode works on a single track repeat pressing the RPT key once. Repeat all the disc pressing the button twice. PLEASE NOTE: The POWER button on the front panel completely turn OFF the unit .
CDP-500 Italian Hi-Tech CD Player (Technical Specifications ) The following data describe the basic technical specifications of the CDP-500 CD player at the time of drafting this manual. The specifications are subject to modification without notice. The product complies with the requirements laid down in the EC regulations. DIMENSIONS: 430mm L x 180mm H x 390mm D WEIGHT: Kg.
CDP-500 Italian Hi-Tech CD Player (Warranty Certificate ) The warranty certificate is enclosed separately and to be valid must be comp leted fill and returned to Blacknote factory or the official distribution. In all countries where there is an official distribution network, the dealer must stamp the warranty certificate.
CDP-500 Italian Hi-Tech CD Player (Troubleshooting) SYNPTOM DESCRIPTION THE CD PLAYER DOES NOT START WHEN THE UNIT IS SWITCHED ON The Disc start DIGITAL RCA OUTPUT DOES NOT WORK just does not When the CD Player is connect to an external D/A Converter does not work CAUSE REMEDY The AC CD Player plug is disconnected from the AC wall plug Connect it being sure that the AC wall plug works Let your official Blacknote dealer opens the unit and change the fuse.
