User Manual

ManualsBrandsBlackloud ManualsElectronicsBUZZI

Quick Guide - 2 Quick Guide - 3 Quick Guide - 4 Quick Guide - 5 Quick Guide - 6

Quick Guide

Package Contents Your BUZZI Getting Started

IR (Infrared) Cable

BUZZI Smart Plug Quick Guide

Quick Guide

1 Power / Reset Button: Click this button to turn the power outlet on/off. Press

and hold for at least 10 seconds to reset.

2 MicroUSB Port: For USB power supply or data transmission.

3 Wi-Fi/Status LED: Displays device and wireless connection statuses as

described below:

LED Color and Status

Definition

Blue Amber

Blinking Off System rebooting

Blinking Blinking Wi-Fi router setup mode

Off Blinking

Connecting to the specified Wi-Fi router in

client mode

Off Off Connected to the Wi-Fi router

Off Fast Blinking Resetting to the factory default settings

4 IR (infrared) LED: Controls appliances that feature an IR remote control

sensor (LED not visible).

5 Standby LED: Displays current power standby status.

LED Color and Status

Definition

Blue

On Standby mode (power off)

Off Power delivery mode (power on)

6 IR (infrared) Cable Port: Connects to the IR cable.

7 Controlled Power Outlet: For plugging in the appliance that you want to control.

Setting Up Hardware

1 Prepare a router.

Have an internet-enabled Wi-Fi router available. This router will be the

wireless communication bridge between your mobile device and your BUZZI.

2 Plug your BUZZI to a power outlet.

Plug your BUZZI to a power outlet within the coverage area of your Wi-Fi router.

3 Plug your appliance to your BUZZI’s power outlet.

Plug your appliance to your BUZZI’s power outlet*. You can press the power/

reset button to turn your device on or off without further setup. To control

your device wirelessly via the BUZZI app, follow the steps in the next sections.

*Your BUZZI works with any appliance whose power is directly controlled via a physical

power switch.

Setting Up Wi-Fi Connection

1 Install the BUZZI app.

On your mobile device, download and install the BUZZI app from either the

Google Play Store or the iOS App Store.

2 Wirelessly connect both your BUZZI and your mobile device to the same

Wi-Fi router.

a) Make sure that Wi-Fi is enabled on your

mobile device, then launch the BUZZI

app. Navigate through the app tour by

swiping left. At the end of the app tour,

select Get Started.

b) Select New Configuration.

Summary of content (3 pages)

PAGE 1
Package Contents Your BUZZI 3 LED Color and Status Blue 1 2 IR (Infrared) Cable 4 3 5 6 Amber Blinking Off System rebooting Blinking Blinking Wi-Fi router setup mode Off Blinking Connecting to the specified Wi-Fi router in client mode Off Off Connected to the Wi-Fi router Off Fast Blinking Resetting to the factory default settings 5 Standby LED: Displays current power standby status.
PAGE 2
Using and Configuring Your BUZZI c) The app will automatically discover your BUZZI. 1 NOTE: If you are using an iPad or an iPhone, you may need to first connect to your BUZZI manually via Wi-Fi. d) c) 6 Set up the IR connection. Your BUZZI features an internal IR LED (see Your BUZZI) which allows you to control appliances that feature an IR remote control sensor. To ensure a more consistent control you can also use the IR cable.
PAGE 3
Safety Document Safety Categories X Prohibited actions ! Situations that need mandatory action ! Situations that need attention To ensure safety of the product and its users, please follow the safety instructions below: Safety Document Safety Document X ! X X ! ! Handle the product with care. Accidental damage will void product warranty. - Increase the separation between the equipment and receiver. ! Keep the product out of reach of children.