Use and Care Guide

CDOLLY

2 Pieces Car Dolly 1,000 lb Capacity

READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

This manual provides important information on proper operation and maintenance. Every effort has

been made to ensure the accuracy of this manual. We reserve the right to change this product at any

time without prior notice.

STOP! CONTACT CUSTOMER SERVICE WITH QUESTIONS OR PROBLEMS.

DO NOT RETURN THIS PRODUCT TO THE RETAILER.

When unpacking, check to make sure all parts listed are included. If any parts are missing

or broken, please call Customer Service. If you experience a problem or need parts for this product,

visit our website http://www.buffalotools.com

or call our customer help line at 1-888-287-6981,

Monday-Friday, 8 AM - 4 PM Central Time. A copy of the sales receipt is required.

KEEP THIS MANUAL, SALES RECEIPT & APPLICABLE WARRANTY FOR FUTURE

REFERENCE. READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS

PRODUCT.

FOR CONSUMER USE ONLY – NOT FOR PROFESSIONAL USE

PAGE 1
CDOLLY 2 Pieces Car Dolly 1,000 lb Capacity READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. This manual provides important information on proper operation and maintenance. Every effort has been made to ensure the accuracy of this manual. We reserve the right to change this product at any time without prior notice. STOP! CONTACT CUSTOMER SERVICE WITH QUESTIONS OR PROBLEMS. DO NOT RETURN THIS PRODUCT TO THE RETAILER.
PAGE 2
IMPORTANT SAFETY RULES COMMON SENSE AND CAUTION ARE FACTORS WHICH CANNOT BE BUILT INTO ANY PRODUCT. THESE FACTORS MUST BE SUPPLIED BY THE OPERATOR. Do not exceed 1,000 lb. weight capacity per Dolly. Be aware of dynamic loading! Use car dollies to support FRONT or REAR end of the vehicle. Do NOT use Dollies to support one side of vehicle. Use four Dollies (two pairs) to support entire vehicle. Read vehicle owner’s manual and instruction manual for Jack (not included) for proper jacking positions before use.