Multi-format HD Video Scaler Model AC139A UMA 1157 Rev C Model AC139A Multi-Format HD Video Scaler Converts between HD and PC Video Formats CUSTOMER SUPPORT INFORMATION Order toll-free in the U.S. 24 hours, 7 A.M. Monday to midnight Friday: 877-877-BBOX FREE technical support, 24 hours a day, and 7 days a week: Call 724-746-5500 or fax 724-746-0746 Mail order: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018 Web site: www.blackbox.com • E-mail: info@blackbox.
Model AC139A Trademarks Used in this Manual BLACK BOX and its logo are registered trademarks of Black Box Corporation. Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners.
Multi-format HD Video Scaler Normas Oficiales Mexicanas (NOM) Electrical Safety Statement INSTRUCCIONES DE SEGURIDAD 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. A: B: C: D: E: Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado. Las instrucciones de seguridad y operación deberán ser guardadas para referencia futura. Todas las advertencias en el aparato eléctrico y en sus instrucciones de operación deben ser respetadas.
Model AC139A Contents 1. Introduction .......................................................................................... 5 1.1 General ........................................................................................... 5 1.2 Features .......................................................................................... 7 2. Installation............................................................................................ 8 2.1 Connecting the Video Inputs and Outputs...............
Multi-format HD Video Scaler 1. Introduction 1.1 General Thank you for purchasing the Black Box Model AC139A, a powerful video processor and scaling product. It combines the functions of many products in one compact and versatile unit. It has both high definition analog as well as digital inputs. Two outputs are available (simultaneously active†), one analog (RGBHV) and one digital DVI-D (HDMI™ compatible).
Model AC139A The DVI input is HDCP compliant. This allows the unit to be used as an HDMI™ Video Scaler (HDMI™ audio is not passed through). When the digital input has HDCP encryption, the DVI output must be connected to a HDCP compatible LCD (by definition all displays with HDMI™ input must be HDCP compliant). Built-in universal power supply keeps the installations clutter free.
Multi-format HD Video Scaler 1.2 Features • High definition digital (DVI / HDMI) and analog (PC VGA / YPbPr) Scaler that accepts PC RGB (up to UXGA), HD Component (480i up to 1080p) and DVI (up to WUXGA) and scales them to DVI and analog outputs at user specified resolutions • HDCP (HDMI™) compliant DVI input and output • Output resolution selectable from 480i to 1080p (HDTV) and VGA to WUXGA (PC).
Model AC139A 2. Installation 2.1 Connecting the Video Inputs and Outputs The video scaler can accept a VGA (analog RGBHV from PC), DVI (digital video from PC or HDMI™ source), and Component Video (Y Pb Pr) from any source. When the source is from an HDMI™ output, an HDMI to DVI cable or adapter is required. Please contact Black Box if you need to purchase this cable. Two outputs connectors are provided. Both show the selected input at the desired output resolution.
Multi-format HD Video Scaler Video Inputs Y Pb Pr: This is also known as Component Video input (analog) and on some equipment it may be labeled as YCbCr. Since this input supports all interlace and progressive resolutions from 480i to 1080p, you can connect it to both legacy and new equipment alike as long as it has component video output. For a list of supported resolutions, please see Specifications Section titled “Supported Input Formats” found later in this manual.
Model AC139A connector with all the pin positions you could use a DVI-I cable as long as your source also has all the pin positions.
Multi-format HD Video Scaler Video Outputs VGA: This is a dual purpose output. Depending on the output resolution you set it will output a PC compatible signal. Note about HDCP For HDMI™ compliance, if the input is from an HDMI™ source with content protection, the VGA output is blanked and front panel LED blinks. DVI: This is the TMDS digital output of the Scaler.
Model AC139A 3. Configuration and Operation 3.1 Front Panel 5 1. 2. 3. 4 3 2 1 Figure 5 – Front Panel Power: Press this button to turn ON or turn OFF (standby) the power to the unit. Menu/Enter: This button serves two purposes. A. Pressing the button will bring up the OSD main menu as shown in the "OSD Menus" section of this manual. B. To act as an "Enter" key to enter sub menu or to adjust setting value of the selected parameter. ▲or▼ buttons: The buttons provide 3 functions: A.
Multi-format HD Video Scaler Front Panel Quick Selection “Hot Keys” Figure 7 If you are not getting any image on your display, it could be that the output resolution setting of the AC139A is not supported by your LCD. Using serial commands or the IR remote, one can quickly switch between various output resolutions. However since the front panel operation relies on OSD menu for navigation, it is very difficult to change the output setting from the front panel if you cannot see the OSD.
Model AC139A 3.2 OSD Menus Pressing the "MENU" button brings up the On-Screen Display (OSD) main menu as shown below: OSD Menu System Video Color Output OSD Info Contrast Brightness Hue Saturation Sharpness Picture Mode Scale Mirror Noise Reduction (H Position) † (V Position) † Exit User Normal Warm Cool VGA SVGA XGA SXGA UXGA WXGA WSXGA WUXGA 480i 480p 576i 576p 720p (50/60) 1080i (50/60) 1080p (50/60) Native H. Position V.
Multi-format HD Video Scaler To adjust the picture quality, use the▲ or ▼ buttons to move the highlight bar to the desired item and then press the MENU to confirm your selection. At this point, the selected parameter will turn red, you can then use the ▲, ▼ buttons to increase or decrease the value of the parameter. When the adjustment has been completed; press the MENU button to leave that parameter. Move the highlight bar to EXIT, and then press the MENU button to exit.
Model AC139A Color Submenu: User: Select to adjust to your favorite color temperature setting. Normal: Normal color tone setting where white is pure white. Warm: Warm color tone (white reddish). Cool: Cool color tone (white bluish). Output Submenu: This submenu is used to set the desired output resolution. When Native is selected the unit reads the native resolution of the connected LCD (via its EDID) and sets its resolution to match it if possible.
Multi-format HD Video Scaler 3.3 Infra-Red Remote control (IR Remote) Power: Press the button once to power on the AC139A. Press again to enter standby mode. Input: Press the button repeatedly to toggle through the various input sources HD: Press the button to select the component input. PC: Press the button to select the VGA input. HDMI/DVI: Press the button to select the DVI input. VGA through 1080p: Press any one of the buttons to directly select the desired output resolution.
Model AC139A 3.4 IR Codes The Infra-Red Remote Control codes are shown for users that wish to program their own universal remote control to control the AC139A. 4. Serial Control The video input selection and signal parameter settings for the AC139A can be controlled via an external control system by using the RS232 port on the unit. Use a straight thru M/F DB9 serial cable to connect the unit to the PC. Only the TX, RX and GND pins are implemented in the connector.
Multi-format HD Video Scaler 4.
Model AC139A 4.
Multi-format HD Video Scaler 5. Troubleshooting There are no field serviceable parts or circuits in the device. If you think that the device is malfunctioning, please first try to reset to the factory default settings (using the RESET button on the IR remote control), and set the output either to XGA (Press MENU + ▲) or 480p (Press MENU + ▼) to obtain an image on your LCD.
Model AC139A 6.
© Copyright 2011. Black Box Corporation. All rights reserved.