JULY 2007 AC1037A AC1037A-XMIT AC1037A-REC DVI Video with Stereo Audio Fiber Optic Transmission System CUSTOMER SUPPORT INFORMATION Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) FREE technical support, 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018 Web site: www.blackbox.com • E-mail: info@blackbox.
AC1037A | AC1037A-XMIT | AC1037A-REC Trademarks TRADEMARKS USED IN THIS MANUAL UL is a registered trademark of Underwriters Laboratories Incorporated. Any other trademarks used in this manual are acknowledged to be the property of the trademark owners.
AC1037A | AC1037A-XMIT | AC1037A-REC NOM STATEMENT Normas Oficiales Mexicanas (NOM) Electrical Safety Statement INSTRUCCIONES DE SEGURIDAD 1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado. 2. Las instrucciones de seguridad y operación deberán ser guardadas para referencia futura. 3. Todas las advertencias en el aparato eléctrico y en sus instrucciones de operación deben ser respetadas. 4.
AC1037A | AC1037A-XMIT | AC1037A-REC nom statement (Continued) 12. Precaución debe ser tomada de tal manera que la tierra fisica y la polarización del equipo no sea eliminada. 13. Los cables de la fuente de poder deben ser guiados de tal manera que no sean pisados ni pellizcados por objetos colocados sobre o contra ellos, poniendo particular atención a los contactos y receptáculos donde salen del aparato. 14.
AC1037A | AC1037A-XMIT | AC1037A-REC items included Depending on which product you ordered, you should have received: AC1037A-XMIT: Qty Description 1 AC1037A-XMIT Transmitter 1 Power Supply 1 AC line cord 1 User Manual AC1037A-REC: Qty Description 1 1 1 1 AC1037A-REC Receiver Power Supply AC line cord User Manual
AC1037A | AC1037A-XMIT | AC1037A-REC GENERAL INFORMATION The AC1037A is a transmitter/receiver pair that transmits a single channel of DVI video (up to WUXGA) and two audio channels over one single mode fiber. The system’s all digital encoding delivers noise-free transmissions that retain all of their initial parameters, regardless of fiber optic cable attenuation.
AC1037A | AC1037A-XMIT | AC1037A-REC TECHNICAL SPECIFICATIONS (Continued) Optical: Operating Wavelength..............................................CWDM (1300 - 1600 nm band ) Optical Fibers...........................................................8-10/125 microns SM Optical Connector.....................................................ST Class I Laser Product complies with FDA performance standard for laser products, Title 21, Code of Federal Regulations, Sub-Chapter J. Miscellaneous: Operating Temp.
AC1037A | AC1037A-XMIT | AC1037A-REC INSTALLATION The AC1037A transmission system is ready for immediate use. There are indicator LEDs on the units for monitoring purposes. The following instructions describe the typical installation procedure and the function of the LED indicators ( See Page 13 ). 1. Power off the PC and AC1037A Units. 2. Connect the DVI video source (PC) to the video input DVI-D connector on the transmitter unit. 3.
AC1037A | AC1037A-XMIT | AC1037A-REC system connections The input and output connections for the AC1037A system is as follows: Audio Connector (Transmitter & Receiver): 3.
AC1037A | AC1037A-XMIT | AC1037A-REC ac1037A-XMIT Edid switch settings Switch Position Loop Internal EDID Information Source From loop-thru monitor Default Settings, Generated Internally Bandwidth (BW) & Equalizer (EQ) settings The AC1037A units have a Bandwidth (BW) and Equalizer Setting Dip swicth located on the front panel. The default factory settings is all switches in the off position. The default equalizer (EQ) setting is for a short DVI cable, less than 10 feet.
AC1037A | AC1037A-XMIT | AC1037A-REC Indicator LED’s The AC1037A-XMIT and AC1037A-REC units have three integral indicator LEDs that are used to monitor the state of the units. The status of the LEDs are as follows: TRANSMITTER and RECEIVER: Power: ON (GREEN): Indicates that correct power has been applied. TRANSMITTER: Video: OFF: Indicates no video detected on the input. STEADY GREEN: Indicates DVI Video detected on the input. Audio: OFF: Indicates no audio detected on the transmitter unit.
AC1037A | AC1037A-XMIT | AC1037A-REC OPERATING pointers & troubleshooting Optical Cable: The AC1037A operates with most single mode (SM) optical fibers. However, be aware that the type of fiber you use will affect the system’s loss budget and the maximum transmission distance that it can support. Troubleshooting: Multimode fiber optic cable contains an optical fiber with a light carrying “core” that is only .0025 inches (62.5 microns) in diameter.
AC1037A | AC1037A-XMIT | AC1037A-REC Notes 14
P/N 126650 © Copyright 2007. Black Box Corporation. All rights reserved.