Function & Arbitrary Waveform Generators Selection Guide for Function Generators and other Signal Sources √ √ √ 1µHz - 20MHz 4 08 4 A W G √ √ √ √ 4 07 1 √ √ √ DC - 21.5MHz 4 07 0 A √ √ 0.
Function Generators Arbitrary/ Function Generators Models 4084AWG & 4086AWG The B+K Precision® 4084AWG and 4086AWG are high performance laboratory grade synthesized function generators with arbitrary capability. Direct Digital Synthesis (DDS) techniques are used to create stable, accurate output signals for all 27 built-in standard and complex (arbitrary) waveforms.
Specifications F r eq ue n cy C h a r ac t er i st i c s Sine Square All Other waveforms Frequency Stability Resolution Accuracy Data entry Units W a v e f o r m Ch ar a c t e r i s t i cs Main Waveforms (Sine, Square) Amplitude resolution Sample Rate Sine Harmonic Distortion of Sine Wave* models 4086AWG 4084AWG 1µHz ~ 20MHz 1µHz ~ 80MHz 1µHz ~ 20MHz 1µHz ~ 40MHz 1µHz ~ 100kHz ±1x10-6 (22°C ±5°C) 1µHz ≤ ± 5x10-6 (22°C ±5°C) s, ms, Hz, kHz, MHz 12 bits 200MSa/s ≤ ≤ ≤ ≤ ≤ - 50dBc (frequency ≤ 5MHz) - 45d
Function Generators Programmable DDS Function Generator Series Models 4084, 4085, 4086 & 4087 The B+K Precision® models 4084, 4085, 4086 and 4087 are high performance laboratory grade synthesized function generators with a wide frequency range of up to 120 MHz. Direct Digital Synthesis (DDS) techniques are used to create stable, accurate output signals for all 27 built-in standard and complex (arbitrary) waveforms.
Specifications 4084 4085 4086 models 4087 F r eq uen cy C h a r ac t er i s t i c s Sine 1µHz ~ 20MHz 1µHz ~ 40MHz 1µHz ~ 80MHz 1µHz ~120MHz Square 1µHz ~ 20MHz 1µHz ~ 40MHz 1µHz ~ 40MHz 1µHz ~40MHz 1µHz ~ 100kHz All Other waveforms ±1x10-6 (22°C ±5°C) Frequency Stability 1µHz Resolution ≤ ± 5x10-6 (22°C ±5°C) Accuracy Data entry Units s, ms, Hz, kHz, MHz W a vef o r m C h ar a c t er i st i c s Main Waveforms (Sine, Square) 12 bits Amplitude resolution 200MSa/s 300MSa/s Sample Rate Sine Harmonic Disto
Function & Arbitrary Waveform Generators 31.5MHz Function Generator - Model 4071 21.5MHz Function Generator - Model 4070A B+K Models 4070A & 4071 represents the finest single source for signal generation to date. Combining the latest DSP and DDS technologies, models 4070A & 4071 offers a number of operating modes, providing a versatile, cost-effective signal source. You will find both models are the best value and most capable instrument for any bench.
Specifications models 4070A, 4071 MAIN OUTPUT Frequency: Level: DC to 21.5 MHz, 31.5 MHz (Model 4071), 0.01 Hz Steps 4 mVp-p to 10.000 Vp-p, 1mV steps (into 50Ω) or -44 dBm to +24 dBm, 0.1 dBm steps (into 50Ω) in Function, Arbitrary and Pulse modes. 4 mVp-p to 5.0 Vp-p, 1mV steps (into 50 Ω) or -44.0 dBm to +18 dBm, 0.1 dBm steps (into 50 Ω) in Sinewave, AM, FM, PM, SSB, Sweep, VCO, Burst, DTMF, Dualtone, BPSK, and FSK modes. Level Accuracy: ±1% Sinewave Distortion <1% Flatness: ± 0.2 dB (DC-10 MHz), ±0.
Function Generators DDS Sweep Function Generator with Arbitrary Function Model 4045 Graphical LCD Display The model 4045 is a must have for anyone needing a feature packed precision generator. A menu-driven front panel operation with an easy-to-read graphic LCD display makes the 4045 easy to operate. Parameter changes and data entry can be made using the rotary knob or via the build-in RS-232C interfaces. Waveform editing can be done from scratch or by modifying standard waveforms.
Function Generators 20MHz DDS Sweep Function Generator Model 4040DDS Specifications F R E Q U E N C Y CH A R A C T E R I ST I C S Sine Square Triangle , Ramp Accuracy Resolution O U TPU T C HA RAC TE RIS T IC S Amplitude Range Resolution Amplitude Accuracy Flatness Offset Range Offset Resolution Offset Accuracy Output Impedance Output Protection The model 4040DDS is a low cost, full featured Direct Digital Synthesis (DDS) generator with a menu-driven front panel interface that includes a large, easy-to-re
Function Generators 10MHz DDS Sweep Function Generator Model 4017B Up to 10MHz available on Sine, Square & Ramp waveforms B&K Precision model 4017B is a true function generator in its line that offers DDS (Direct Digital Synthesis) technology allowing to generate very precise and accurate waveforms with little distortion.
Function Generators DDS Function Generators Models 4007DDS & 4013DDS Specifications 4007DDS Waveforms Sine, square and triangle O pe r at i n g M o d es Continuous Symmetry Sweep 4007DDS The models 4007DDS & 4013DDS are a versatile sweep function generators utilizing an advanced Direct Digital Synthesis (DDS) design. These units generates superb quality waveforms with high signal precision and stability. It provides sine & square wave outputs over the frequency range from 0.1 Hz to 7MHz (4007DDS), 0.
Function Generators Specifications models 4017A 4040A Frequency Characteristics Waveforms Range Resolution Tuning Range Fine Variable Duty Cycle Operating Modes Output Characteristics Impedance Level Amplitude Attenuation DC Offset SINE Wave Distortion Flatness (Into 50Ω) Square wave Symmetry Rise time (Into 50Ω) Triangle Wave TTL Output Level Rise time Duty Cycle CMOS Output Max.
Function Generators 5 MHz Function Generator with Digital Display Specifications Frequency Characteristics Waveforms Range Model 4011A Resolution Dial Accuracy Tuning Range ■ 0.5 Hz to 5 MHz ■ Sine, Square, Triangle, Pulse, & Ramp output ■ Coarse and Fine tuning ■ 4 digit LED display 4011A ■ Variable duty cycle ■ Variable DC offset 5 MHz Sweep ■ 0.
Function Generators Multi-Function Generator with Power Supply Model 4051 The model 4051 is a programmable multifunction generator that is extremely versatile and affordable. It is the perfect instrument for R&D, Manufacturing Test Systems, Educational and Training applications, and Service and Repair.
Function Generators Specifications 4051 Fr e qu en c y C h a r a ct e r i st i c s Wave forms Range Resolution Tuning Range Variable Duty Cycle Operating Modes Frequency Stability Ou t pu t C h a r a c t e r i st i c s Impedance Level Amplitude Control DC Offset 50Ω Sine Wave Distortion Flatness model Sine, Square, Triangle, ±Pulse, ±Ramp 0.15Hz to 20MHz in 8 ranges 0.01, 0.
Pulse Generator 10 MHz Pulse Generator with 4-Digit LED Display Model 4030 B&K Precision Model 4030 is a versatile signal source which combines four functions into one unit – waveform generation, pulse generation (through variable symmetry), frequency sweep operation, and triggered operation. The 4030 offers low rise and fall time pulsed signals up to 10MHz to meet many test and measurement applications.
4MHz Function Generators 4001A 4003A 4MHz Sweep Function Generator Model 4001A Models 4001A and 4003A are 4MHz Sweep Function Generators. The sweep function offers linear or log sweep with variable sweep rates and widths. The model 4003A has the addition of a 60MHz five digit external frequency counter. Common Features ■ Generates Sine, Triangle & Square waveforms from 0.
Signal Generator 10MHz Handheld Sine & Square Wave Signal Generator Model 3003 Model 3003 Hand-held 10MHz Sine & Square Wave Generator is a small size and lightweight portable Signal Generator that makes it practical for use where a traditional sized meter may be too cumbersome. Model 3003 has a frequency accuracy of 0.02% with 0.1Hz stability making it ideal for use by schools, research & development departments, hobbyists, and field test technicians.
RF / Audio Generators 3001 20 Hz-150 kHz Sine/Square Wave Audio Generator Model 3001 2005B 150 MHz RF Signal Generator Model 2005B ■ Sine and square wave generator ■ 20 Hz to 150 kHz in 46 steps ■ 100 kHz to 150 MHz on six bands ■ Low distortion R-C oscillator ■ Output to 450 MHz on harmonics ■ Variable output control ■ AM modulation, internal or external ■ Compact, fully portable, light weight ■ Frequency monitor output for external ■ Low battery indicator frequency counter ■ Step and variabl
Digital Multimeters & Clamp-On Meters √ √ Dual Display 0.06 RS-232 51000 √ √ √ √ √ √ √ √ 0.06 51000 √ √ √ √ √ √ √ √ 0.5 1999 √ √ 0.5 1999 √ √ √ 0.5 1999 √ √ √ √ 0.5 1999 √ √ √ √ √ 2.0 1.2 1999 3200 2.0 1999 Tool Kit® Mini-Pro® 52 √ √ √ √ √ √ √ 20 √ 200 √ √ √ √ 20 √ 250 √ √ √ 2860A 2880B 56-57 2890A 80 √ 10 80 √ 10 √ 200 √ √ 10 √ 200 √ √ 10 √ 200 √ √ 10 √ 200 √ √ 10 10 200 200 √ 10 200 TEL.
Multimeters Clamp-On Analog 1.0 N/A 1.0 1.0 0.5 0.5 0.8 0.5 √ √ √ √ 10000 2000 10000 3999 2000 3200 2000 4000 √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ 3% 5% Pocket 1.3 3200 √ √ For the right DMM please see our Multimeter Selection Tool on the Web - www.bkprecision.com √ √ √ 316 312B 313A 70 325 330B 350B 367A 68-69 369B 12 200 114B 0.
Multimeters Multimeter Use Accuracy and Resolution Multimeters are test instruments designed to perform more than one test parameter. A basic multimeter provides three measurements: Voltage (AC and DC) Resistance (in ohms) Current (AC and DC) Multimeters may also include other test parameters such as: Continuity Diode test Capacitance measurement Frequency measurement dBm measurement Transistor gain (hFE) Logic level You need to review the complete test parameters for the multimeter you are considering.
Survivor® Multimeter Specifications model 2860A The “Survivor” name says it all! Excellent meters for most jobs that require flexibility, accuracy and speed. Value packed features make these meters a must in every Tool Kit.
Dual Display 51,000 Count Multimeters Dual Display 51,000 Count DMM Models 2880B & 2890A Model 2890A is a Dual Display 51,000 Count DMMs with exceptional accuracy and functionality. It offers superb performance with many features that are useful for trouble shooting electronic and electrical circuits or to test and evaluate circuits in a field service application.
Display 51,000 Count Multimeters Dual New DMM Test kits Contains Most Commonly Requested Accessories 2880BKIT B&K Precision Corporation’s new Model 2880BKIT and 2890AKIT DMM Test Kits are the latest additions to its growing line of test and measurement instruments. The new kits combine B+K’s most popular DMM’s with the most commonly requested accessories for each model. B+K has taken the guesswork out of ordering these meters and accessories.
Test Bench® High Performance DMM Models 388B, 389A, 390A & 391A High performance and value priced, the Test Bench® Series offers more features for the dollar than other multimeters. These meters include Component Test capabilities, Resistance, Diode Test and Capacitance, in addition to measuring Frequency, Temperature and a Logic Indicator. See the chart below for the meter that best fits your needs. Dual injection molding process allows a better grip and protection for the meters. CE marked and UL listed.
Specifications (continued) 390A 391A True RMS reading 200µA, 2mA, 20mA, 200mA, 20A* 10nA, 100nA, 1µA, 10µA, 1mA 200µA to200mA:±(0.5% rdg + 5 dgt.) 20A: ±(2% rdg + 10 dgt.) 400µA, 4mA, 40mA, 400mA, 20A* 0.1µA, 1µA, 10µA, 100µA, 10µA 400µA - 400mA:±(1% rdg + 5dgt) 20A: ±(2% rdg + 3 dgt) AC Accuracy 200µA to200mA:±(1.2% rdg + 10 dgt.) 20A: ±(2.5% rdg + 20 dgt.) 400µA to 400mA:±(1.5% rdg + 4 dgt) 20A: ±(2.5% rdg + 4 dgt.) Input Protection µA/mA input: 0.
Tool Kit® Multimeters Models 2703B, 2704B 2706A, & 2707A Excellent meters for most jobs that require flexibility, accuracy and speed. Value packed features make these meters a must in every “Tool Kit®.” Common Features: 2703B 2704B Features 2706A 2704B models 2703B Manual 10A AC/DC Manual 10A AC/DC Manual 10A AC/DC Manual 10A DC 0.1Ω to 200MΩ to 20µF √ √ 0.
Tool Kit® Multimeters 2706A 2707A Specifications (continued) 2707A Diode Test Transistor Test (hFE) Capacitance Ranges Resolution Accuracy Test Frequency, Voltage Frequency Ranges Resolution Accuracy Sensitivity Overload Protection Logic Probe (TTL) Logic Threshold Minimum Pulse Width Input Impedance Overload Protection Temperature Range Accuracy -4° to + 900°F (-20° to 500°C) 900° to + 1400°F (500° to + 750°C) Continuity Tone General Display Sampling Operating Temp: Storage Temp Power Requirements Batte
Mini-Pro® Multimeters Non-Contact Voltage Indicator. Light and sound denote the presence of AC voltage from 70V to 480VAC @50 - 60Hz. This eliminates the need for an extra tool to carry in your tool box. Models 2405A, 2407A & 2408 Reliable, Durable & Multi-Function 2405A The Mini-Pro® multimeters are a professional quality multimeter at low cost. Three new meters with a price point that will put them in every toolbox and field service kit.
Mini-Pro® Multimeters Specifications 2405A DC VOLTS Ranges Resolutions Basic Accuracy Overvoltage Protection Input Impedance AC VOLTS 2408 models 2407A Manual Ranging 2V, 20V, 200V, 600V 200mV, 2V, 20V, 600V 1mV, 10mV, 100mV, 1V 100µV, 1mV, 10mV, 1V ±(2%rdg+1dgt) ±(1.2%rdg+1dgt) 600V, DC + AC Peak 600V, DC + AC Peak 10MΩ 10MΩ Manual ranging, average responding, rms reading 200V, 600V 200mV, 2V, 20V, 600V Ranges 100mV, 1V 100µV, 1mV, 10mV, 1V Resolutions ±(2.
Non-Contact ACV Detectors with Flashlight AC Voltage Detector Detects AC Voltage from 40VAC to 300VAC Water Resistant No Lithium Battery Uses Standard Alkaline AAA Battery SenseLite ‚ Long Battery Life 100,000hr Bulb Ultra-Bright White LED Pocket DMM with Bargraph Model 2700 ■ Analog bargraph ■ 3200 count display ■ Auto power off ■ Range Hold ■ Data Hold 2700 Specifications model Red LED indicates the presence of AC voltage 2700 DC VOLTS Ranges Resolutions Basic Accuracy Overvoltage Protection In
Bench Multimeter 4 1/2 Digit True RMS Model 2831D The model 2831D provides versatility and reliability for a broad spectrum of laboratory and service applications. Being a true Multimeter it can make diode, frequency and continuity measurements in addition to basic current, voltage and resistance measurements.
Dual Display Bench Multimeters Specifications models 5491A 5491A 5492 50,000 Count Digit Dual Display Model 5491A The new PC-Compatible benchtop unit provides an easy to read dual display with 50,000 count accuracy. Model 5491A offers a very accurate, feature packed True RMS bench DMM at a very reasonable price.
Dual Display Bench Multimeters Specifications (Continued) 5491A A C C ur r e n t (T r ue R M S , A C C o up l i n g M o d e) Slow Sampling Rate Resolution Accuracy ± Medium Sampling Rate 500uA, 5mA, 50mA, 500mA 10nA, 100nA, 1uA, 10uA, Resolution Accuracy ± 1.5% + 50dgt (30 - 50Hz) 0.5% + 20dgt (50 - 2kHz) 1.
Clamp-On Multimeters Models 330B, 350B 367A, 369B B+K Precision offers a wide variety of current clamps for safe non-invasive current measurement. Measure up to 2000A with these reliable, rugged instruments. All of B+K Precision clamps are much more than a current clamp offering the ability to measure, voltage resistance, capacitance and even frequency. Additionally, special features allow for the recording of minimum and maximum values, peak values, test diodes and for continuity.
Clamp-On Multimeters Specifications models 369B AC Voltage (using test leads) Range Resolution Basic Accuracy Overload Protection Input Impedance DC Voltage (using test leads) Range Resolution Basic Accuracy Overload Protection Input Impedance Resistance Range Resolution Basic Accuracy Overload Protection Frequency Range Resolution Accuracy Overload Protection Capacitance Range Resolution Accuracy Overload Protection Jaw Opening Display Polarity Measure Rate Overrange Indication Operating Temperature St
Clamp-On Multimeters True RMS AC/DC Power Clamp Meter Model 325 The lightweight, portable, battery-powered Clamp-On meter measures the most common AC Volts, DC Volts, and AC current needed to troubleshoot residential and small commercial electrical systems. 312B 313A 316 325 ■ Back light 3 3/4 digits LCD with max. ■ ■ ■ ■ ■ reading 3999, plus decimal point, unit symbol indication Auto range, Auto power off, Auto zero High speed bargraph Function keys: Max./Min.
Specifications models 117B 114B DC VOLTS Ranges Accuracy Sensitivity AC VOLTS Ranges Sensitivity Accuracy Frequency response DC CURRENT Ranges Accuracy Burden Voltage RESISTANCE Ranges Resolutions Maximum Open Circuit Voltage Maximum Short Circuit Current Accuracy Open circuit voltage Overload protection dB Measurement Range 0 dB Reference Battery Test Range Load Battery Drain TRANSISTOR LEAKAGE TEST Ranges Accuracy Maximum Applied Voltage TRANSISTOR GAIN MEASUREMENT Range Accuracy Display Polarity Op
Multimeter Accessory Kits True RMS DMM with Test Lead Set Model 2880BKIT This kit contains the B&K Precision model 2880B Digital Multimeter and a selected assortment of test lead accessories. Included Test Lead Accessories • Highly flexible silicone test leads with sheathed (shrouded) 4mm banana plugs; Right-angle for the meter, straight for the accessories, 1.5m long. Rated IEC 61010-031 1000V CAT III / 600V CAT IV to 12A • Smooth 2mm tip probe bodies, ideal for everyday testing.
Multimeter Accessories Replacement Test Leads Model TL 130A General Purpose DMM Kit If you need only one basic accessory kit for your meter, this is the one. Attach probes or clips to the sheath plug to complete your test. Soft, flexible silicone leads make movement easy. Kit is voltage and current rated for either electronic or electrical applications. ■ All components compliant to IEC61010-2-031 ■ Silicone Lead Wire length 60" (1.
Oscilloscopes WHAT DO OSCILLOSCOPES DO? B+K Precision® offers a broadest line of oscilloscopes including digital and analog/digital oscilloscopes ranging from a 30 MHz analog dual-trace unit to 100MHz lab scope. No matter what your application design, service, production or home use, B+K Precision® has an oscilloscope that meets your requirements. An oscilloscope is a test instrument that visually displays an electronic signal on a display screen. The display shows voltage (vertical) and time (horizontal).
Oscilloscopes OSCILLOSCOPE TERMS ACCELERATING VOLTAGE—The internal voltage that causes trace illumination on the oscilloscope display. A higher voltage is needed at fast sweep speeds. BANDWIDTH—The frequency range of signals that can be observed on the oscilloscope with minimal degradation. Typically, bandwidth is specified in megahertz (MHz) and is the maximum frequency at which signals are within -3dB in amplitude.
Oscilloscopes Selection Guide Analog Bandwidth Sample Rate Memory per Channel Cursors & Readout Data Output Model Page Digital Storage (MHz) 25 250MS/s 2 x 1K YES USB 2530 77-79 20 10MS/s 2 x 2K NO Analog 2522B 80 All B+K Precision digital storage oscilloscopes are dual channel and have Equivalent Time Sampling.
Oscilloscopes Digital Storage Oscilloscope 25MHz, 250MSa/s Model 2530 ESSENTIAL FEATURES FOR THE COST CONSCIOUS USER The 2530 Digital Storage Oscilloscope delivers essential features and reliable performance at a price you can afford. Analog style knobs and controls combined with Autoset functions make this oscilloscope easy to use. Advanced triggering, automatic measurements and FFT functions provide you with many options to debug your circuits.
1) Oscilloscopes Oscilloscopes Front Panel Features 1) Easy setup and use The AUTO button identifies the input signal and automatically sets up the vertical, horizontal and trigger controls to produce a useable display. You can customize the display by selecting option single cycle, multiple cycle, rising or falling edge. Press the DEFAULT button to instantly restore the default setting. Users familiar with analog oscilloscopes will appreciate the analog style controls and features.
Oscilloscopes Specifications model 2530 P er for m an ce Ch ar ac t eri s tic s Bandwidth Real time sample rate on each channel Channels Display Rise Time Record Length* Vertical Resolution Vertical Sensitivity DC gain accuracy Maximum Input Voltage Position Range Time Base range Timebase accuracy Input Coupling Input Impedance Vertical and Horizontal Zoom I/O interface Specifications (Continued) Aut om at ic Wa vef orm M ea sur em en t Time 25 MHz 250 MSa/s 2 1/4 VGA Monochrome LCD <14ns 4000 points 8
20MHz Analog / Digital Storage Oscilloscope Model 2522B ■ 2k memory per channel ■ 20MHz analog bandwidth ■ 1GHz equivalent time sampling (at 0.1 µs/div) ■ 10MS/s sampling rate each channel ■ Pre-trigger capture Digital Mode Specifications model 2522B Storage Word Size 2048 x 8 bits/channel; (2 k/channel with direct sampling, 1 k/channel with equivalent time sampling). 1 in 256, approximately 25 steps/div. 1 in 2048, approximately 200 samples/div.
Model 2190B 100MHz Analog Oscilloscope ■ Dual time base oscilloscope ■ 23 calibrated ranges, main time base (2 channel) ■ 5mV/division sensitivity ■ Sweeps to 5ns/division ■ Signal delay line ■ 15 kV accelerating voltage ■ Channel 2 output Specifications model 2190B EXTERNAL TRIGGER VERTICAL AMPLIFIERS (CH 1 and CH 2) Sensitivity Attenuator Accuracy Input Impedance Input Capacitance Frequency Response X5 MAG AC Rise Time Signal Delay Time Square Wave Characteristics Maximum Input Voltage 5mV/div t
60 MHz Analog Oscilloscope Model 2160A ■ 5mV/div sensitivity ■ Signal delay time ■ 23 calibrated ranges-main ■ Component tester time base ■ 23 calibrated ranges-delayed time base ■ Z axis input ■ Single sweep Specifications model 2160A VERTICAL AMPLIFIERS (CH 1 and 2) Sensitivity Attenuator Accuracy Input impedance Input Capacitance Frequency Response Rise Time Operating Modes Polarity Reversal Maximum Input Voltage 5mV/div to 1V/div x 5mag 1-2-5 sequence, plus x 5 gain step, Vernier control provi
40 MHz Analog Oscilloscope Model 1541D ■ 5mV/div sensitivity ■ 19 calibrated sweeps ■ Video sync separators ■ X10 sweep magnification Specifications model 1541D CRT VERTICAL AMPLIFIERS (CH 1 and CH 2) Sensitivity Accuracy Input Impedance Frequency Response Rise Time Operating Modes Chop Frequency Max Input 5 mV/div to 5 V/div, 1 mV/div, with X5 gain 5 mV/div to 5 V/div, ±3% (X5 gain), ±5% 1MΩ±2%, 25pF ±10% DC to 40 MHz (-3dB), DC to 7 MHz (-3dB) at X5 gain 8.
30 MHz Analog Oscilloscope Model 2125A ■ Delayed sweep in 23 steps ■ Built-in component tester for capacitors, inductors, diodes, transistors, zener diodes ■ 23 step time base to 0.1ms/div ■ Deluxe handle/tilt stand Specifications model 2125A HORIZONTAL AMPLIFIER (Input through channel 1 input) VERTICAL AMPLIFIERS (CH 1 and CH 2) 5 mV/div to 5 V/div, 1 mV/div to 1 V/div at x5 10 steps in 1-2-5 sequence.
30 MHz Analog Oscilloscope Model 2120B ■ Dual or single trace operation 5 mV/div sensitivity ■ AUTO/NORM triggered sweep operation with AC, TVH, TVV and line coupling ■ Calibrated 23 step time base with x 10 magnifier ■ Compact low-profile design Specifications model 2120B HORIZONTAL AMPLIFIER (Input through channel 2 input) VERTICAL AMPLIFIERS (Ch 1 and CH 2) Sensitivity Attenuator 5 mV/div to 5 V/div, 1 mV/div to 1 V/div at X5 10 steps in 1-2-5 sequence.
3O MHz Analog Oscilloscope W/Frequency Counter Model 2121 ■ Dual or single trace operation 5 mV/div sensitivity ■ AUTO/NORM triggered sweep operation with AC, TVH, TVV and line coupling ■ Calibrated 23 step time base with x 10 magnifier ■ Compact low-profile design ■ Built-in 50 MHz frequency counter Specifications model 2121 VERTICAL AMPLIFIERS (Ch 1 and CH 2) Sensitivity Attenuator 5 mV/div to 5 V/div, 1 mV/div to 1 V/div at X5 10 steps in 1-2-5 sequence.
Oscilloscope Accessories General Purpose Oscilloscope Adapter Kit CC540 Features: Model CC 540 General Purpose Oscilloscope Adapter Kit provides a range of BNC and N Type coaxial interconnection for general purpose oscilloscope test interconnections. All components feature standard BNC or N type connectors with 50Ω impedance to ensure accurate measurements. The kit is provided in a convenient foam lined storage case for easy selection and use.
See page 140 through 151 for additional oscilloscope and general purpose accessories Oscilloscope Accessories General Purpose Probes B+K Precision offers a complete line of oscilloscope probes to enhance the versatility of your unit. Both fixed attenuation and switchable from 100 to 250 MHz are available. Each probe includes a full accessory kit with a Sprung Hook, Replacement Tip and BNC Adapter.