HBCR001 Universal Remote User Manual FCC ID:NMCHBCR001 Make sure your HBC unit is updated with the latest firmware which can support your Universal Remote.
Contents Contents -------------------------------------------------------------- 1 Quick User Guide -------------------------------------------------- 2 Warnings and Safety Instructions ------------------------------ 6 Features -------------------------------------------------------------- 7 Kit Includes --------------------------------------------------------- 8 Installation ------------------------------------------------------------ 9 General Operaions -------------------------------------------------- 1
Quick User Guide General Functions and Layouts LED Indicator Vol ‘Up’ Button ‘Power’/ ‘Answer’ Button DFU/ Charging Socket Vol ‘Down’ Button Velcro Hook Back view Front view Button functionality is identical to HBC Unit. For more complete instructions, please refer to your HBC Series User Manual. Pairing with HBC unit 1. seconds until LED blink blue and red alternatively.
Quick User Guide 2. While holding the ‘Up’ or ‘Down’ button, power ‘On’ the Universal Remote, only release the ‘Up’ or ‘Down’ button until the LED blinks blue and red alternatively. OR Just Connect Mode It is only necessary to do the pairing for the first time. After pairing with your unit, your Universal Remote will connect automatically to your paired unit once you power on your device. 1. Make sure the ‘Power’ for the paired HBC unit is on. 2.
Quick User Guide Power On Press the ‘Power’ button once, the Universal Remote will be turned on. Power Off The Universal Remote will be turned off automatically once the paired HBC unit is off. Reset Connected Micro USB cable to the computer USB port or power sources. Plug in and plug out the micro USB cable from Universal Remote. Battery Low LED indicator will appear blinking red every second to indicate that the battery is low, hence charging is required.
Quick User Guide Firmware Update 1. Download and install the new version software from UCLEAR website. support your Universal Remote. 2. Connected securely the USB cable to the computer USB port. + 3. Powered off the Universal Remote by holding ‘Up’ and ‘Down’ buttons at the same time. 4. Insert the Micro USB to the Universal Remote DFU/ Charging Socket. + + 5.
Warning and Safety Instructions This manual uses the and ! icons to highlight certain instructions. Below is an explanation of the icons. ! Attention This icon highlights special instructions and precautions intended to avoid damage to the system. Non-compliance may void the product warranty. Warning This icon provides precautions important to prevent injuries to the user.
Warning and Safety Instructions ! Attention Charging and handling rechargeable battery products incorrectly may cause instructions below: s Never change the batteries yourself, always bring the device to an authorised dealer to perform the replacement for you. s When charging, use ONLY the charging cable provided or replacement cable from the UCLEAR dealer. Using similar, compatible or any other cables may lead to permanent product damage and will void the product warranty.
Kit Includes Universal Remote Package Contains: 1 Universal Remote 1 Micro USB Charger (1m long) Universal Remote Quick Start Guide 1 Velcro Strap (150mm long) EN 1 Quick Start Guide 8
Installation 1. Place the Velcro strap near to the handle bar. (As per illustration above) 2. Loop the Velcro strap around the handle bar.
Installation 3. Place the Universal Remote onto the Velcro strap. 4. Ensures the Universal Remote is fastened. Installation completed.
General Operations Your UCLEAR Universal Remote is now all set and ready to go! Universal Remote to HBC, HBC to Mobile Phone Establish connection between Universal Remote and HBC: s Power ‘On’ the HBC unit, hold ‘Up’ and ‘Down’ buttons for seconds until LED blinks blue and red alternately. s While holding the ‘Up’ or ‘Down’ button, power ‘On’ the Universal Remote, only release the ‘Up’ or ‘Down’ button until the LED blinks blue and red alternately.
General Operations Establish connection between HBC and Mobile Phone s Hold the ‘Up’ and ‘Down’ buttons on the HBC unit for 2 seconds. s The LED indicator would blink blue and red alternately. s Turn on the mobile phone bluetooth and select the respective UCLEAR HBC name to pair with the unit. When prompted to enter a passcode, enter ‘0000’. *Most mobile phones when paired would be automatically connected with both phone and music bluetooth capabilities.
General Operations Pick up incoming call: Press the Universal Remote ‘Answer’ button once. Reject calls: Hold the Universal Remote ‘Answer’ button for 2 seconds. Voice calls: Hold the Universal Remote ‘Down’ and ‘Answer’ buttons for 2 seconds. Last number redial: Hold the Universal Remote ‘Up’ and ‘Answer’ buttons for 2 seconds. Play music Press the Universal Remote ‘Answer’ button for 2 times. Stop music Press the Universal Remote ‘Answer’ button 1 times.
Intercom Connection Step 1 Pair the Universal Remote to respective HBC unit, if they have not been paired before. To connect the Universal Remote to the helmet communicator, s Power ‘On’ the HBC unit and hold ‘Up’ and ‘Down’ buttons for 2 seconds until LED blinks blue and red alternately. s While holding the ‘Up’ or ‘Down’ button, power ‘On’ the Universal Remote, only release the ‘Up’ or ‘Down’ till the LED blinks blue and red alternately.
Intercom Connection Step 2 Pairing between HBC units. other HBC units. Pairing process needs to be carried out only once. s s Pick one units as the 1st device, hold ‘Answer’ and ‘Up’ buttons for 3 seconds.The status indicator wouldblink purple. s For the 2nd device, hold ‘Answer’ and ‘Up’ buttons for 3 seconds. The status indicator wouldblink purple. Wait until the 1st device status indicator to turn blue, then proceed to pair the next device.
Intercom Connection The time of in use Step 2 Turn ‘On’ all HBC units, connecting up all the intercom. To enable the intercom, hold the ‘Up’ button for 2 seconds. All the paired HBC units will be chained up automatically. Or more… Step 3 Connect respective Universal Remote by pressing ‘Power’ button once. (Turning ‘On’ the power, the Universal Remote will connect to the already paired HBC units).
Intercom Connection s If the phone has not paired with the respective HBC unit yet, pairing is necessary by holding the ‘Up’ and ‘Down’ buttons of the Universal Remote for 2 seconds. This will let the helmet communicator into pairing mode. The status indicator ofthe HBC unit would blink blue and red alternately. Or more… s Next turn on the mobile phone bluetooth functions and search for bluetooth devices. Select the UCLEAR HBC device name to pair with the desired device.
General Button Configurations Action Button Not Connected Power on Press ‘Answer’ button once Pairing While holding ‘Up’ or ‘Down’ button, on the ‘Power’ Connected to HBC (HBC connected to phone) Activate HBC pairing Hold ‘Up’ and ‘Down’ buttons for 2 seconds Reset HBC Press ‘Answer’, ‘Up’ and ‘Down’ buttons simultaneously Pick up call Press ‘Answer’ button once End call Hold ‘Answer’ button for 2 seconds Reject call Hold ‘Answer’ button for 2 seconds Voice dial Hold ‘Answer’ and ‘Down’ but
General Status Indicator Configurations The table below shows the status indicator configurations State 1 Power on (No connection) Status Indicator Blink purple once every second 2 Pairing to HBC unit Blink blue and red alternatively slowly 3 Connecting to HBC unit Blink blue and red alternatively quickly 4 Connected to HBC unit Blink blue slowly once every 2 seconds 5 Battery low Blink red every minute 6 Power off Blink red 5 times 7 Battery charging Solid red 8 Battery fully charged
Technical Data Unit Dimension (L x W x H) Weight 60mm x 20mm x 12mm 10g Bluetooth Version 4.1 , Class 2 RFComm Carrier frequency 2.402 – 2.480 GHz RF output power 7.76dBm Power Power consumption Power input (Charging) 50mW (max) 5V / 300 mA Built-in-battery 3.7V, 30mAh x 2, Lithium-ion Polymer (Rechargeable) Operation time 15 hours Temperature Operation temperature - 28.
Notices compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Notices ! BATTERY WARNING: The UCLEAR Universal Remote contains a rechargeable lithium ion polymer ! CHARGING NOTICE: equipments, please follow all the instructions below: ż ż ż Do not immerse the product, AC adaptor or speakers in water. Do not install, place or use the product near any source of heat for example: stove, radiator, oven, toaster, coffee maker or otherapparatus that gives off heat. Always use the provided AC power adaptor and cable included in the package to charge the product.
Notices LIMITATIONS OF WARRANTY: All product warranties for the product by are limited to those mentioned in the product manual.
Notices CORRECT DISPOSAL OF THIS PRODUCT: Do not dispose this product with other household wastes at the end of its working life. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling. Household users should contact either the retailer details of where and how they can take this item for environmentally safe recycling.
Notices You should not allow the operations or use of the product or any attempts to use it by any persons including yourself to compromise anyone’s safety including your own or to cause harm to any vehicles, property, objects, livestock, inventories, assets and the like under any circumstances. You or any users of the product are to take all necessary safety measures and precautions and to remain alert to all surrounding conditions.
Notices COPYRIGHTS: Copyright © 2014 BITwave Pte Ltd. All rights reserved. No part of this guide may be reproduced in any form or by any process whatsoever without prior written consent from BITwave Pte Ltd. LICENCES: The UCLEAR trademark and logo is exclusively owned by BITwave Pte Ltd. Any use of the mark by any other parties without prior written permission of BITwave Pte Ltd constitutes an infringement of legal rights.
Notices Cet appareil s’accorde avec Industrie Canada licence-exempte RSS standard. (1) cet appareil ne peut pas causer l’intervention, et (2) cet appareil doit accepter de l’intervention, y compris l’intervention qui peut causer l’opération non désirée de.
EN 28