User's Manual

ManualsBrandsBitswave ManualsElectronicsGame Base Station



Advanced Technologies

2 player WIRELESS PORT

RF REMOTE EXTENSION FOR

WIRED PLAYSTATION CONTROLLERS

Congratulations! You have purchased the most advanced RF Wireless video game

controller extension ever made. The Wireless Port eliminates hazardous cords across

the room by allowing you to access the PlayStation controller ports next to you. The

Wireless Port was designed by a group of PhD’s in RF technology that has developed

specialized RF communications for NASA. The Wireless Port will transmit two

standard wired controller signals to the PlayStation console utilizing Radio Frequency

technology and will support all the features of the original Sony controller, with

wireless game play up to 50 feet. Please read the following operation instructions

before using the Wireless Port.

PRODUCT FEATURES

• Full PS2 Analog pressure sensitive compatible

• SMART CHANNEL automatically finds the optimal RF channel for each Wireless Port.

• Advanced embedded antenna

• Power On button, powers on game play

• Auto power off when no data transmission for 5 minutes

• Manual power off button (hold Vibration Motor On/Off button for more than 2 seconds,

power is turned off)

• Vibration On/Off switch, allows you to manually turn controller motors off to conserve

battery power.

• Low battery indicator, Power Indication LED will blink;

• Reach your save point. Automatically turns off vibration motors when battery is low to

conserve power.

• Low battery shut down when operation is unreliable, the Wireless Port pauses game

play and shuts off the system entirely until batteries replaced.

Summary of content (4 pages)

PAGE 1
 Advanced Technologies 2 player WIRELESS PORTTM RF REMOTE EXTENSION FOR WIRED PLAYSTATION CONTROLLERS Congratulations! You have purchased the most advanced RF Wireless video game controller extension ever made. The Wireless Port eliminates hazardous cords across the room by allowing you to access the PlayStation controller ports next to you. The Wireless Port was designed by a group of PhD’s in RF technology that has developed specialized RF communications for NASA.
PAGE 2
BUTTONS 1. VIBRATION ON BUTTON • Powers on Dual Vibration controller motors to simulate game play response. Wireless Port vibration function default is: Off. 2. POWER ON BUTTON with LED INDICATOR • Power On button activates Wireless Port for game play. Wireless Port will go into Sleep Mode after 5 minutes of non-use to conserve battery life, the Power On LED will go out. Press the Power On button to re-activate the Wireless Port.
PAGE 3
• Battery Life: Up to 70 hours with vibration Off. NOTE: When using the vibration function, battery life will vary based on the user performance during game play and the genre of game. • Smart Channel: The Automatic RF Channel select feature will choose from 8 dedicated frequencies to connect the Wireless Port to the receiver when powered on. For Best Performance: • Use the Wireless Port and Receiver within 50 feet of each other.
PAGE 4
• Do not mix alkaline with any other type of battery (carbon zinc, nickel cadmium, etc). • Do not mix different brands of batteries. • Do not leave dead batteries in the Wireless Port. When the batteries are losing their charge, the Power Indicator will Flash and become Dim. When this happens, promptly replace all used batteries with fresh new batteries. • Do not leave batteries in the Wireless Port for long periods of non-use. • Do not charge Alkaline batteries. • Do not put the batteries in backwards.