Quick Start Guide

ManualsBrandsBitatek ManualsComputers & AccessoriesRugged Mobile Computer

Frey Glider XS

Frey Glider XS WWAN

Rugged Mobile Computer

Quick Start Guide

REV.:1.0

General Safety Rules

y Please read this Guide carefully before you start using this device.

y Use only the Frey Glider components and accessories supplied by the manufacturer.

y Do not attempt to disassemble the Frey GliderXS, as it does not contain parts that can

be repaired by the user. Any tampering will void the warranty.

y Discard replaced battery packsproperly according to local laws.

y At the end of this device’s product life, dispose of properly according to local laws.

y Do not submerge the Frey Glider XS in any type of liquid.

Package Contents

y Frey GliderXSMobile Computer

y Battery Pack (with Rechargeable Battery)

y Hand Strap

y Quick Start Guide

y USB Charge/Communication Cable

y Quick Charge Compliant Power Adapter

After unpacking, please inspect package contents. If any item is

damaged or missing, please contact your customer support

representative immediately.

Features

Front View

1. Scan LED

Charging LED

Logo

P senser /Light senser

Information LED

Back Key

Home Key

Recent Key

Speaker

Back View

1. Battery/ Cover Latches

2. SIM /Micro SD Card Slot

3. Battery Pins

4. Battery/ Cover Lock Switch

5. Hand Strap Hook

6. Back Camera

7. Flash LED

Side View

1 Power Button

2 Scan Button

3 Function Button

4 Volume Up

5 Volume Down

6 Scan Button

7 Function Button

8 USB Connecter

Top View

Scan Window

Bottom View

Cradle IO Connect

Charging Instructions

The Frey Glider XS battery pack is not initially fully charged. After installing the battery pack,

please charge it via the USB cable or the charging cradle.As default, the battery pack is

disconnected at the factory to avoid damage caused by excessive draining. Replace the

battery pack annually to ensure maximum performance.Avoid storing batteries for long

periods of time in fully charged or very low battery level status. To maintain a moderate

chargeand maximize battery life, charge spare battery packs every two to three months.

Installing the Battery Pack

1. Detach the hand strap to access the battery slot.

2. Push the Battery Lock Switch to Open.

3. Align thebattery pack and the device connectors and slide it into place.

4. Push the Battery Lock Switch to Closed to secure the battery.

1. BatteryPack

2. Battery Slot

Summary of content (3 pages)

PAGE 1
Frey Glider XS Frey Glider XS WWAN 1 Power Button Features 2 Scan Button Front View 3 Function Button 4 Volume Up Rugged Mobile Computer Quick Start Guide 5 Volume Down 1. Scan LED 6 Scan Button 2. Charging LED 7 Function Button 3. Logo 8 USB Connecter 4. P senser /Light senser 5. Information LED 6. Back Key 7. Home Key 8. Recent Key 9. Speaker Top View 1 Scan Window Bottom View Back View 1 Cradle IO Connect Charging Instructions 1. Battery/ Cover Latches REV.:1.
PAGE 2
¾ Do not place the device in liquids to prevent short-circuits or fire. ¾ Do not place this device near an open fire. ¾ If the power or USB cable is seriously twisted or broken, stop using immediately to prevent electric shock, short-circuit, or fire. ¾ Stop using immediately if there is any unusual smell or overheating during charging or operation. ¾ Stop using immediately when there is liquid or dew on the device. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACEDBY AN INCORRECT TYPE.
PAGE 3
FCC Warning Statement This device meets all the other requirements specified in Part 15E, Section This device complies with Part 15 of the FCC Rules. Operation is subject to the 15.407 of the FCC Rules.