User Manual

ManualsBrandsBissell ManualsvacuumBISSELL 3475F SpinWave R5 Robotic Mop and Vacuum

SPINWAVE® R5

ROBOTIC VACUUM

MODEL 3475F

Product Overview

1. Tank Release Button

2. Power Switch

3. Mop Pads

4. Bumper

5. Play/Pause Button

6. Home Button

What’s in the Box? ................................................... 4

Docking and Charging Your Robot ..............4

Connecting to the App ..........................................5

Before You Clean .......................................................5

Mapping ........................................................................... 6

Scheduled Cleaning ................................................ 6

Dry Vacuum Mode ................................................... 6

Mop Mode ...................................................................... 8

Cleaning the Brush Roll ...................................... 10

Replacing the Edge Cleaning Brush ............ 11

Cleaning the Sensors ..............................................11

Storing Your Robot .................................................. 11

Troubleshooting .........................................................11

Limited Warranty ..................................................... 12

Summary of content (12 pages)

PAGE 1
SPINWAVE® R5 .A T. 18 7 6 U.S . ES S RT HO M NING E LEA XP E EC ROBOTIC VACUUM MODEL 3475F What’s in the Box?.................................................... 4 Mop Mode....................................................................... 8 Docking and Charging Your Robot............... 4 Cleaning the Brush Roll....................................... 10 Connecting to the App...........................................5 Replacing the Edge Cleaning Brush............. 11 Before You Clean......
PAGE 2
SYMBOL EXPLANATION Caution. Read operator’s manual. SYMBOL EXPLANATION EXPLANATION Use only BISSELL® cleaning formulas intended for use with this machine. Do not freeze. Check the manufacturer’s tag before cleaning textile. “W” on the tag as shown means you can use your cleaner. This symbol on the product and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste.
PAGE 3
• Do not expose appliance to fire or excessive temperature. Exposure to fire or temperature above 130°C may cause explosion. • Follow all charging instructions and do not charge the appliance outside of the temperature range specified in the instructions. Charging improperly or at temperatures outside of the specified range may damage the battery and increase the risk of fire. • Have servicing performed by a qualified repair person using only identical replacement parts.
PAGE 4
What’s in the Box? Standard accessories may vary by model. BISSELL® SpinWave® Robot with Dry Tank Mop Tank with Mop Pads Docking Station Docking Tray Power Adapter Cleaning Tool Trial Formula Replacement Edge Cleaning Brush Extra Mop Pads Extra Filters (comes attached to dry tank) (select models) Docking and Charging Your Robot Open up the BISSELL Connect App for how-to videos. Note: The docking station and docking tray must be installed on a hard surface.
PAGE 5
Connecting to the App Download the BISSELL Connect App to customize your clean. Create cleaning zones or keep out zones, schedule cleanings, view the robot’s cleaning path, track the cleaning history, view notifications, troubleshoot and more – all from the palm of your hand. 1. Download BISSELL Connect App from App Store or Google Play. 2. Make sure you’re near your WiFi router before turning robot ON (I). Once downloaded, open app and sign in or create a new login.
PAGE 6
Mapping Your robot will create a virtual map of your home to allow customized cleaning options. Open the BISSELL Connect App and press start. The robot will begin mapping and cleaning at the same time. Your robot will clean a room in sections starting with the perimeter of that section and filling in with a structured pattern. Note: If the robot is moved to an area outside of the originally mapped area, it will see this as a new space and restart the mapping process.
PAGE 7
Dry Vacuum Mode (continued) Spot Mode x2 1. Place robot in center of area you want to clean. To start cleaning, press play/ pause button twice or select “Spot” mode in the BISSELL Connect App. 40 inches (1m) 40 inches (1m) 2. Robot will clean in a square pattern covering an area approximately 40" x 40" for about 5 minutes. It will beep when finished and return to dock after spot clean is complete. Maintaining the Dirt Bin 1. Turn power switch OFF. Press button on top of dirt bin and pull to remove.
PAGE 8
Mop Mode Open up the BISSELL Connect App for how-to videos. In mopping mode, your robot will vacuum and mop at the same time. It uses dual rear rotating mop pads combined with a BISSELL® formula to clean your home’s hard floors while automatically avoiding soft surfaces like area rugs and carpet. Filling Your Mop Tank 1. Choose your formula*. 2. Turn power switch OFF. Press button on top of tank and pull to remove. 3. Twist to unlock tank cap and pull up to remove. 4.
PAGE 9
Mop Mode (continued) Manual Cleaning 1. Turn robot ON. 2. Start robot automatically with app, or manually by pressing play/pause button. 3. When robot is finished cleaning, it will return to dock. If you want it to return to dock before cleaning is complete, press play/pause button, then press home.
PAGE 10
Mop Mode (continued) Maintaining the Mop Pads and Debris Trap 1. Turn power switch OFF. Press button on top of mop tank and pull to remove. Place tank upside down on a soft surface. 2. Firmly pull up on mop pads to remove from mop pad drivers. Replace mop pads if damaged. Machine wash separately in warm water. 3. To reattach, use middle hole on pads to align with driver. 4. Empty dirt bin after each use, including after mopping. 5. Push tab on the top of mop tank to open dirt bin and empty it. 6.
PAGE 11
Replacing the Edge Cleaning Brush The edge cleaning brush needs to be occasionally cleaned to work more effectively. 1. Pull up on base of brush. 2. Once removed, rinse or soak edge cleaning brush in water. Be sure it is completely dry before reinstalling. 3. Push brush directly onto holder until it clicks into place. Cleaning the Sensors After repeated use, debris can accumulate on the sensors of the robot and impact its performance.
PAGE 12
Limited Warranty This limited warranty is provided by BISSELL® International Trading Company B.V. (“BISSELL”) and applies in Australia and New Zealand. It gives you specific rights. It is offered as an additional benefit to your rights under law. You also have other rights under The Australian Consumer Law or New Zealand Consumer Laws, whichever applies to you. You can find out about your legal rights and remedies by contacting your local consumer advice service.