High definition driving recorder Wireless WIFI version of smart phone An instruction manual
Users: Dear customer friend, thank you for purchasing the high traffic recorder product produced by our company. This product uses the mainstream of the market on the market as the main chip of the main control codec chip, the pure hardware codec 1080P vehicle record image, for you to provide the real meaning of the HD recording picture.
Description of wiring Installation instructions 1. Turn off the car engine 2. The TF card is correctly inserted into the recorder card slot. [note] please use high-speed TF Card (above Class6), capacity is not less than 2MB, TF card maximum support 32GB. 3. Connect yellow power line to 12V power supply, red ACC ignition control line, black grounding, yellow joint video AV output to AVI input interface of navigation.
2 key version 3 key version Open, turn off / confirm key 1. State, short press Start with a long press 3 seconds shutdown, video preview and video, in order to play the pause button. 2. Function selection is short as the confirmation key. Photographing /Menu key 1. Short press for Photographing /Menu key quick photo. . 2. After pause recording, long press the Photographing /Menu key to enter the menu mode (need to connect the CarDVD screen display) 3.
and restart the system. LED scintillation indicator 1. In the WIFI state, the recording blue light flashes once in 1 second. In the WIFI state, the recording blue light is always on. The red light is on. 2. The system upgrade blue light flashes flashing for 0.3 seconds. 3. The red light is on and flashing to indicate no WiFi recording. 4. If the red light is steady, the recorder is faulty. Note: This recorder will automatically videotape in the preview and WIFI mode. 1.
(1) :Press (2) :Choose a WIFI hotspot and press connect (3) :Then the live video screen of tachograph can be viewed. Function introduction of RoadCam 1.[recorded video] Tachograph video list which can be viewed and download. 2.[picture] Tachograph photo list which can be viewed and download. 3.[Record] Press to record video 4.
Video resolution:HD, 1296P 30 frame /S Video signal:NTSC/PAL (default NTSC) Microphone: support (by default) Storage card:8~32G, CLASS 10 above Power supply mode: ignition with ACC Language: multilingual language (the default Chinese) Gravity sensor: three axis solid acceleration sensor (open by default) Seamless video: seamless connection of each video without missing seconds. Time imprint: time accurate overprint on video Video playback: you can directly select the required segments for playback.
2. can not be videotaped after the opening: please check if the TF card is inserted or the TF card is formatted once; TF card is damaged or not; if there is a problem, please reinsert the card or formatted TF card once or replace the new card. 3. there is an abnormal phenomenon such as crash. Please press reset key RESET. 4. the video is blurred: please check whether the lens is dusty. Please try the lens. 5. press the boot button not to start: please check whether the connection is normally electrified.
FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications.