GENERAL INFORMATION & TIPS 1. Please read the assembly instructions prior to assembling the chair. 2. To avoid damage, assemble the chair on a non-abrasive surface such as carpet. 3. Make sure all bolts tightly fastened before the chair is used. 4. This chair is not for commercial use. Please make sure you have all parts before beginning assembly. Please wait until all steps are completed before tightening bolts. 1. A Phillips screwdriver is necessary for assembly. It's not included in hardware list. 2.
Attach back support (B) into right and left side frame | Attach the seat (C) into right and left side frames the matching holes. Secure using 1 1/2" | & A2). Secure using 2" bolts (D) and 1 1/2" bolts (E), bolts (E), as shown. as shown. ** DO NOT TIGHTEN BOLTS YET. STEP 3 Make sure all parts are correctly connected and tighten all bolts completely using screwdriver. Tapping in the wooden caps (F) to cover bolts head using rubber mallet. THE CHAIR IS NOW READY FOR USE. Install the cushion.
GENERAL INFORMATION & TIPS 1. Please read the assembly instructions prior to assembling the bench. 2. To avoid damage, assemble the bench on a non-abrasive surface such as carpet. 3. Make sure all bolts tightly fastened before the bench is used. 4. This bench is not for commercial use. Please make sure you have all parts before beginning assembly. Please wait until all steps are completed before tightening bolts. 1. A Phillips screwdriver is necessary for assembly. == It's not included in hardware list. 2.
STEP Attach the back support (B) and back apron (D2) into right and left side frames (A1 & A2). Secure using 1 1/2" bolts (G) into ‘back support (B} and back apron (D2) as shown. ** DO NOT TIGHTEN BOLTS YET. = Put the seat (C) into prevailed holes of back apron (D2) as shown. Next, attach the front apron (D1) into right and left side frames (Al & A2). Secure front apron using 2" bolts (F}, as shown. Secure the seat (C) using 1" screws (H) into front apron (D1} and back apron (D2).
GENERAL INFORMATION & TIPS 1. Please read the assembly instructions prior to assembling the table. 2. To avoid damage, assemble the table on a non-abrasive surface such as carpet. 3. Make sure all bolts tightly fastened before the table is used. 4. This table is not for commercial use. Please make sure you have all parts before beginning assembly. Please wait until all steps are completed before tightening bolts. 1. A Phillips screwdriver is necessary for assembly. == It's not included in hardware list. 2.
STEP 1 STEP 2 Attach the leg frames (C) into each comer of table top (A). Secure using 1 1/2" bolts (D ). Attach shelf (B) to the leg frames (C). Secure using 1 1/2" bolts (D). ** Do not tighten bolts yet. STEP 3 Make sure all parts are correctly connected and tighten all bolts using screwdriver. Tapping in the wooden caps (E) to cover bolts head using rubber mallet. THE COFFEE TABLE IS NOW READY FOR USE.
GENERAL INFORMATION & TIPS 1. Please read the assembly instructions prior to assembling the table. 2. To avoid damage, assemble the table on a non-abrasive surface such as carpet. 3. Make sure all bolts tightly fastened before the table is used. 4. This table is not for commercial use. Please make sure you have all parts before beginning assembly. Please wait until all steps are completed before tightening bolts. 1. A Phillips screwdriver is necessary for assembly. == It's not included in hardware list. 2.
STEP 1 Ww Vi Attach the leg frames (B) to the table top (A) and secure with 1 1/2" bolts (C). Using fillips screwdriver. STEP 2 * | Make sure all parts are correctly connected and tighten all bolts using screwdriver. Tapping in the wooden caps (D) to cover bolts head THE TABLE 1S NOW READY FOR USE. using rubber mallet.